Perspective Projection| EG| Unit-V | Part-2| Engineering Graphics| GE3251

EG subject is a Common subject for first-year second semester for All Department students in Anna University. The important Questions and Answers are discussed in EG subject in this video.
How to pass Engineering Graphics - EG (GE3251) subject in 40 mins video is now uploaded in our Poriyaalan lecturer video channel.
• How to pass Engineerin...
UNIT-I
Part 1 : • Ellipse, Parabola & Hy...
Part 2 : • Cycloidal & Involutes ...
UNIT-II
Part 2 : • Projection of Planes |...
UNIT-III
Part 1 : • Projection of Solids |...
Part 2: • Projection of Solids| ...
UNIT-IV
Part 1 : • Section of Solids | EG...
Part 2 : • Section of Solids | EG...
UNIT-V
Part 1 : • How to pass Engineerin...
Engineering Graphics - EG - GE3251 (EG, I year, II- Semester).
GE3251 - ENGINEERING GRAPHICS
Prof.A.Aravindh:: 99524 37464
Prof.P.Govintharaj::86106 16566.
This video clearly explain and guide you to get a full mark in Perspective Projection in Engineering Graphics by. Professor P.Govintharaj handle this subject and he have 06 year of experience in teaching field and He handle this subject above 4 times to the Engineering students.
This video introduces the concepts of Plane Curves, Projection of Points, Lines and Plane Surface, Projection of Solids & Freehand Sketching, Projection of Sectioned Solids and Development of Surfaces, & Isometric and Perspective Projections.
In this video he shares his experience to the students. This video clearly explain how to pass this subject, how to write this Exam and how present this exam.
Anna University Regulation 2021 Common to all first year Engineering, II- Semester- Engineering Graphics - EG - GE3251- Syllabus
GE3251 - ENGINEERING GRAPHICS
UNIT IV
PROJECTION OF SECTIONED SOLIDS AND DEVELOPMENT OF SURFACES Sectioning of above solids in simple vertical position when the cutting plane is inclined to the one of the principal planes and perpendicular to the other - obtaining true shape of section. Development of lateral surfaces of simple and sectioned solids - Prisms, pyramids cylinders and cones. Practicing three dimensional modeling of simple objects by CAD Software (Not for examination)
#EG, #EngineeringGraphics, #GE3251, #graphics #ellipse #parabola #Hyperbola#engineering, #firstyear, #2semester, engineering graphics,#engineer graphics,engieering,engineering,#graphics,engineering drawing,engieering drawing,engineering degree,graphic,learn engineering, #eg, #ge251, ge8151,engineering graphics,engineering graphics in tamil,ellipse by eccentricity method,ellipse drawing in tamil,how to construct an ellipse in engineering graphics,engineering graphics ellipse in tamil,engineering drawing,ellipse in tamil,ellipse procedure in tamil,engineering graphics basics in tamil,ellipse engineering drawing in tamil,ge8152 engineering graphics in tamil,engineering graphics parabola in tamil,methods of construction for an ellipse, engineering drawing,iti engineering drawing,orthographic projection in engineering drawing,engineering,engineering drawing basics,isometric projection in engineering drawing,engineering drawing for first year engineering,technical drawing,engineering graphics,drawing,engineering drawing tutorials,introduction to engineering drawing,how to read mechanical engineering drawing,engineering technology,iti drawing exam,basic engineering drawing

[@mother165]

Thank you sir .Really the way of teaching is awesome 💯.love you sir.i watched many you tube videos but I didn't get clarity but now I get full clarity about perspective projection.

[@parthibanparthiban242]

Really your teaching was super sir.........I can understand very easily and clearly...........keep rocking sir......

[@KarthikaVenkatesh_.]

Thank you so much sir❤ ...its easy to understand 😊

[@manojpeddinti8984]

Sir u r teaching excellent 😇I am from Chittoor.AP👍

[@Sanjaytamil894]

Sir picture plane edges touching the picture plane na eppadi

[@360_GADGETS]

Thank you sir .I'm Anna university student...Your video is super

[@hariharane9500]

Congrats professor

[@govintharajp1338]

Tq Professor

[@S._U_N_D_A_R681]

Sir 1st sum la 30 mm left of the pyramid axis yanga podanum.

[@Poriyaalan]

Left side la draw pannanum pa

[@bh39589]

​@@Poriyaalan 30 mmm pyramid axis sum use பண்ணிக்கலா? Where 1st sum la

[@mohamedyasarm9282]

Sir in front of point poda ma epdi sir e point potinga ​@@Poriyaalan

[@amreenfathimaa2003]

Sir.. neenga sonna important topics ellam practice panna questions kodu nga sir

[@PoovarasuGunavathi]

7th sem mechanical engg. Non destructive testing and evaluation (NDTE) subject how to pass and important questions pls make vedio sir...

[@santhoshkumar-dg7bq]

Sir R2021 sem 3 exam tips videos podunga sir like how to pass plz sir awaiting 👍

[@itz-me-Akash01]

Sir material science important question s vidoe upload panunga

[@deepaks7221]

Sir I forget to put the border lines will it reduce mark. Please sir kindly reply 🙏

[@Poriyaalan]

No problem pa. They don't reduce the mark for Border line

[@deepaks7221]

@@Poriyaalan ok sir

[@Shiningstar_akshu]

Sir step marks poduvaangalaaah sir???

[@ԵԹՌՄՏՎԹ-հ7կ]

Sir..1st plan la 30mm to the left of axis ..antha point neenga use panavey ila

[@ԵԹՌՄՏՎԹ-հ7կ]

Please clarify

[@AbdulRahman-kt1dx]

​@@ԵԹՌՄՏՎԹ-հ7կBro athu central plane namma first ah oru vertical line poduvomle athu la irunthu left side 30 mm thalli draw pannanum

[@ԵԹՌՄՏՎԹ-հ7կ]

Thank you

[@lijinalex8277]

Thank you sir . Definitely very very useful.

[@madhanraj4719]

Thank you sir very useful video sir

[@govintharajp1338]

All the best

[@BalaNarayanan-pw6lw]

Sir Perspective Projection la endha solids ku lam question kedpaanga

[@Poriyaalan]

Ella solids Kum same procedure than pa

[@BalaNarayanan-pw6lw]

@@Poriyaalan Ok Sir... Thank You

[@iamwinner9197]

Sir 7th sem mechanical subjects pass method upload panunga

[@k.vigneshwaran4775]

Sir 7th sem mechanical ku how to pass nu vedios podunga sir please

[@govindsamy7984]

Congrats govind sir..

[@govintharajp1338]

Tq sir

[@gayathri1550]

Sir please make video for ndt

[@sahayavalan3251]

Superb ah puriuthu 💯👏

[@govintharajp1338]

Share it with your friends

[@sahayavalan3251]

@@govintharajp1338 🙌ok bro

[@Msdhoniand]

​@@govintharajp1338 cube kum perspective video podunga please nala irukku indha videos

[@Gowtham6pm]

Sir how to pass in ME8071 Refrigeration and Air Conditioning video podunga sir🙏🙏🙏

[@mohamedarshadb248]

Sir can you post NDT important question and how to pass NDT

[@ajinarv]

Sir one doubt in 1 at qns point 2and 3 are invisible so connecting 1to 2 doted line 2 to 3 doted line and 3 to 4 didn’t draw dot line Y sir

[@Poriyaalan]

Visible edges are drawn in dark line and dot line non visible edges. Seen from station point.

[@ajinarv]

Ok sir

[@MEARUNPANDIANP]

Nice work sir👍

[@Learnmech700]

super and nice best teaching sir

[@govintharajp1338]

Tq jeeva

[@williamjames8071]

7 th sem mech
1.Process planing cost estimation
2.power plant engineering
3.disaster management
4.total quality management
5.mechatronics
6.environmental and social impact assessment
Itha six subject unit wise important questions video podunga sir. Exam vara poguthu.plz plz

[@vijaysharan5735]

Thank you so much sir unga playlist la irukura videos dha pathutu poren plz wish me luck

[@Poriyaalan]

Best of luck pa.

[@sridharsridhar6948]

Super teaching sir thank u

[@Poriyaalan]

You're most welcome

[@Premkumar_0057]

Thanks sir very nice 👍

[@BALA2004]

Sir unit 2 upload pannuinga sir.....

[@wednesdayaddams718]

Nandri sir onnum theriyama erundhen

[@gowtham2551]

sir m3(ma3351), engineering mechanics(me3351),engineering thermodynamics(me3391) videos upload pannunaga sir

[@robinraja.r3346]

Sir PHYSICS ( material science)
Questions model and important questions podunge sir

[@sathyaadhi1965]

Superb teaching👏

[@voice_of_rajesh25]

Sir kindly upload the fn question paper answer key in rough diagram please 🥺🥺🥺🥺🥺

[@amreenfathimaa2003]

Sir... Unit 4 kum indha Madhiri podunga

[@santhoshs8651]

Super sir now I am understand👏tq

[@govintharajp1338]

All the best

[@santhoshs8651]

@@govintharajp1338 TQ sir 🤗

[@VISHAL-th1dy]

Sir Mechanical 7th sem ku videos podunga plss... Exams are nearing 🥲

[@geethageehaaa779]

Sir inaki kula ela units ku podamudiyuma

[@Poriyaalan]

Sry pa. We have unit1 and 5 only. It's not possible to upload all units pa. Better watch EG dos and don'ts video

[@ajith83]

Additive manufacturing subject important question podunga sir

[@kavirajguru9444]

வாழ்த்துக்கள் நண்பா...

[@govintharajp1338]

Tq kaviraj

[@aravindrs9181]

Sir post next videos for power plant engg, Mechatronics

[@sathishkumar9712]

Super Govindraj

[@govintharajp1338]

Tq sathis

[@trendingmemes83]

Sir, any update about grace mark for fea and cad 3rd year mechanical kindly reply sir.

[@Poriyaalan]

cad no problem pa. but FEA lot of failures are there. Monday i will tell about FEA grace mark

[@trendingmemes83]

@@Poriyaalan sir, you said you will post video on Monday. Kindly make a video about this sir so it will be helpful for us.

[@voice_of_rajesh25]

Please upload maths important questions for sem 2 sm and N

[@Poriyaalan]

Snm already available pa

[@argentina8099]

Sir mechatronics unit wise video podunga please

[@oplegendyt8169]

me8793 ppce video podunga sir night kulla pls sir

[@TPONNARASANP]

ME8072 renewable source of energy important questions podunga sir exam vara poguthu

[@mohanapriyamoni2535]

Superb sir😀

[@bernass_yt6708]

Thanks a lot sir 💜

[@sathaiyan]

Som Regulation 2017 Arrear exam easya pass Aavathu eppadi sir

[@Poriyaalan]

Video is available in our channel pa

[@sridharkarunanithi9133]

M1 video podunga sir

[@Poriyaalan]

Already available pa

[@mohanrajk1450]

Sir plzzz upload the 7th sem important questions videos

[@mohanrajk1450]

1.Non destruction testing and evaluation
2.process planning and cost estimation
3.Renewable sources of energy
4.Environmental social impact and assessment
5.mechatronics
6.power plant engineering
Important Questions need sir for above mentioned subjects

[@hello_guys31]

Thank u sir

[@PettakaranGamingBrothers]

Thank you Sir

[@govintharajp1338]

Guys, Morning University Question set-1: Draw the Perspective view of Rectangular (25mm *30mm) prism (Height:50mm) asked
#am very Happy#

[@dhanasekarramesh8253]

After noon question paper very difficult sir

[@dhanasekarramesh8253]

Afternoon question paper 4) b question correct aah sir any grace mark irukuma sir pls

[@balamurugans1425]

Antha 30 mm enga sir pochu

[@dhanasekarramesh8253]

Cylinder sum teach pls sir (perspective view sum)

[@Poriyaalan]

Not much important pa

[@dhanasekarramesh8253]

@@Poriyaalan ok sir

[@vijaayshankarms2659]

please update 7th sem important topics .
NDTE
TQM
TOM
PPE
PPCE
Mechatronics

[@joserekha777]

Tqsm

[@Manomahi13]

Semester 7 - Mechatronics video need

[@VISHAL-th1dy]

Sir enna sir videos eh poda matringa... Semester start aiduchu... Mech 7th sem videos upload plss

[@trajavel5851]

Super sir

[@sakthiss7178]

❤️❤️❤️

[@jotheeswaran1409]

👌

[@SUGANRAJ-i9w]

Super 👑

[@nambikauthra8000]

Tq sir 😊

[@keditz-uu9uv]

Sir unga Govinda Raj thana .....

[@SolitaryGamer]

sir m2 video sir

[@voice_of_rajesh25]

Can u upload the important questions for physics for information for CSE please 🥺🥺🥺🥺🥺

[@Poriyaalan]

We plan it pa. But we can't

[@vijaayshankarms2659]

@@Poriyaalan please post for 7th sem mech important questions..

[@gowtham0227]

Jii robotic pass agurathu video

[@williamjames8071]

7 th sem mech
1.Process planing cost estimation
2.power plant engineering
3.disaster management
4.total quality management
5.mechatronics
6.environmental and social impact assessment
Itha six subject unit wise important questions video podunga sir. Exam vara poguthu.plz plz

[@thalapathivijay5682]

Thankyou sir