Ellipse, Parabola & Hyperbola| EG| Unit-I |Part-1 Engineering Graphics| GE3251| Plane Curves

EG -Engineering graphics is an important subject of engineering which provides students an opportunity to enhance their capability of imagination and lateral thinking. The following are the objectives of this course: To understand the drawing importance in engineering. To describe the 3D objects into different 2D views.
This video clearly explain to get a maximum mark in Engineering Graphics, it Explains how to draw a Plane Curves (Ellipse, Parabola & Hyperbola) in Engineering Graphics (EG).
EG is a drawing subject in Anna university- 2nd Semester-Common to all Engineering students.
Important EG Question and Answers of Unit-1 are discussed in this video
EG subject is a Common subject for first-year second semester for All Department students in Anna University. The important Questions and Answers are discussed in EG subject in this video.
How to pass Engineering Graphics - EG (GE3251) subject in 40 mins video is now uploaded in our Poriyaalan lecturer video channel.
• How to pass Engineerin...
UNIT-I
Part 1 : • Ellipse, Parabola & Hy...
Part 2 : • Cycloidal & Involutes ...
UNIT-II
Part 2 : • Projection of Planes |...
UNIT-III
Part 1 : • Projection of Solids |...
Part 2: • Projection of Solids| ...
UNIT-IV
Part 1 : • Section of Solids | EG...
Part 2 : • Section of Solids | EG...
UNIT-V
Part 1 : • How to pass Engineerin...
Engineering Graphics - EG - GE3251 (EG, I year, II- Semester).
For more Details contact,
Prof.A.Aravindh:: 99524 37464
This video clearly explains and guides you to get a pass mark in Engineering Graphics. Professor V.Haribalaji handles this subject and he has 13 years of experience in the teaching field and He has handled this subject above 8 times to Engineering students.
This video introduces the concepts of Plane Curves, Projection of Points, Lines and Plane Surface, Projection of Solids and freehand Sketching, Projection of Sectioned Solids and Development of Surfaces, and isometric and Perspective Projections.
In this video, he shares his experience to the students. This video clearly explain how to pass this subject, how to write this Exam and how present this exam.
Anna University Regulation 2021 Common to all first year Engineering, II- Semester- Engineering Graphics - EG - GE3251- Syllabus
GE3251 - ENGINEERING GRAPHICS
CONCEPTS AND CONVENTIONS (Not for Examination)
Importance of graphics in engineering applications - Use of drafting instruments - BIS conventions and specifications - Size, layout and folding of drawing sheets - Lettering and dimensioning.
UNIT I PLANE CURVES AND FREEHAND SKETCHING
Basic Geometrical constructions, Curves used in engineering practices: Conics - Construction of ellipse, parabola and hyperbola by eccentricity method - Construction of cycloid - construction of involutes of square and circle - Drawing of tangents and normal to the above curves.
#EG, #EngineeringGraphics, #GE3251, #graphics #ellipse #parabola #Hyperbola#engineering, #firstyear, #2semester,
engineering graphics,#engineer graphics,engieering,engineering,#graphics,engineering drawing,engieering drawing,engineering degree,graphic,learn engineering, #eg, #ge251, ge8151,engineering graphics,engineering graphics in tamil,ellipse by eccentricity method,ellipse drawing in tamil,how to construct an ellipse in engineering graphics,engineering graphics ellipse in tamil,engineering drawing,ellipse in tamil,ellipse procedure in tamil,engineering graphics basics in tamil,ellipse engineering drawing in tamil,ge8152 engineering graphics in tamil,engineering graphics parabola in tamil,methods of construction for an ellipse, engineering drawing,iti engineering drawing,orthographic projection in engineering drawing,engineering,engineering drawing basics,isometric projection in engineering drawing,engineering drawing for first year engineering,technical drawing,engineering graphics,drawing,engineering drawing tutorials,introduction to engineering drawing,how to read mechanical engineering drawing,engineering technology,iti drawing exam,basic engineering drawing

[@Charu-lp3cu]

Any 2024 watcher here.....😅

[@Rocktamilan19]

Bro 😅

[@DeviDevi-nm1et]

Your teaching method is very understandable sir

[@Truepeace-yt]

Amazing teaching sir.
Your are great!!! Sir

[@Poriyaalan]

Kindly share the EG playlist to your friends 🙏

[@akshidha.r.n]

All my doubts cleared in one video thanks a lot sir...

[@Poriyaalan]

Kindly share to your friends pa. In this channel EG playlist you have 5 units video

[@suvisheshsudharsan1356]

Thankyou very much sir ....I very confused about the pencil usage ....you clearly taught sir ❤🎉

[@msharikibrahim7926]

Sir your teaching is very understandable

[@hariharane9500]

Very nice sir 🎉

[@subashkumar8667]

So much useful for me ❤❤
Thank you sir

[@kavinsarvan7]

Tq sir

[@kbillielise9741]

Sir ninga nalla tech pannuringa

[@Poriyaalan]

Thank pa

[@naresh6087]

Tq sir

[@ravivarman9605]

thx sir very use full

[@naveenbabur1959]

Sir how to find vertex of hyperpola.. When they didn't given eccentricity in fraction?
For eg given, d= 55mm ; e=1.5
how to find vertex for this question

[@Poriyaalan]

1.5 is equal to 3/2, now you get a fraction value

[@naveenbabur1959]

@@Poriyaalan ok sir.. Thank you

[@intimurali5528]

Thankyou sir

[@Poriyaalan]

Kindly share it to your friends

[@aravindha9013]

Super sir

[@sailavanya6075]

Thank u so much sir very useful 🥰

[@grace6648]

Thank you 🙏

[@varsha9469]

Sir continue putting videos... very useful

[@Poriyaalan]

Sure pa. If U need an EG subject?

[@varsha9469]

Engineering graphics continuous ah teach panunga sir....

[@greenlove7311]

The nearest point on a curve from the directrix is 36 mm and the eccentricity of a curve is 2/3.Draw the curve, name the curve and also draw the, tangent and normal on a curve 50 mm away from the directrix.
Sir in this question directrix la erundhu vertex distance dhanna sir 36 mm....e=(2/3)×36 use panni VF kandupidikanum ahh sir??

[@Poriyaalan]

Ur right pa. Vertex is the nearest point. So first mark the vertex and then mark the focus point. Draw the ellipse from the directrix line use scale and mark the 50mm point on the curve and draw the tangent and normal line.

[@itz-me-Akash01]

Sir engineering mechanics important question video upload panunga plz

[@funnyvideosofficial8638]

16 mark ready

[@shamruthaalamu7756]

Sir,How to draw projection of line

[@kbillielise9741]

😃

[@kbillielise9741]

😀

[@SathishKumar-ch8rx]

Computer aided design and manufacturing 6 th sem upload pannuinga sir

[@kbillielise9741]

Akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka akka

[@kbillielise9741]

seriya sir

[@kbillielise9741]

Kiruki

[@kbillielise9741]

Akka pathuta

[@swethajosephswethajoseph9975]

Unit 2 podunga sir

[@Poriyaalan]

Sure pa

[@kbillielise9741]

Enga wrk panniringa

[@kbillielise9741]

Akka

[@Heromass12345]

Important questions send

[@kbillielise9741]

Nalla iruku ana ennaku avlo 😕

[@kbillielise9741]

😄

[@kbillielise9741]

Enga clg vanga enga sir ku nadathavey theriyala

[@Poriyaalan]

Entha college pa

[@kbillielise9741]

Nalla teching sir ennoda akka tha intha video refer panna sir

[@fahad-lr1ro]

Sir ellipse 4/3 and diameter 60mm vachu sum podunga sir

[@Poriyaalan]

4/3 is a hyperbola pa. In my method right side 4 parts left side 3 parts vachi podunga pa.

[@kbillielise9741]

😅

[@kbillielise9741]

😆

[@kbillielise9741]

😂

[@kbillielise9741]

Akka naa patha

[@Poriyaalan]

Yaru pa nee

[@kbillielise9741]

Kiruki lusu

[@kbillielise9741]

Sir sry ithu en akka va sonna

[@rambaskaran6654]

Tq sir

[@it-preethi7128]

Tq sir

[@kbillielise9741]

😁

[@kbillielise9741]

😂

[@kbillielise9741]

🤣