Catia V5 Tutorials|Part Design|Stiffener

Thanks for watching! If you have any queries, projects, training needs, or consulting needs related to:
1. PowerBI dashboards and reports, Excel Dashboard and Reports, CATIA Modeling
2. PMP/RMP/SP/Six Sigma Green Belt, ISO 9001:2015 Lead Auditor Certification
Feel free to contact me at [e-mail].
Enjoy the video? If you'd like to support the channel, you can use the "Super Thanks" feature to send a monetary donation directly through TH-cam. Your support helps me create more valuable content-thank you!

[@MichaelJPanayi]

thank you, I was having trouble with this as my profile wasn't touching the body! Im learning Catia from scratch with only online tutorials so this was a great help :)

[@smlfrd]

Can't get this to work. I did EXACTLY as you showed in the video and I get "Feature Definition Error: The selected sketch contains several open profiles or some geometry used for construction. You must specify the construction geometry to solve the profile ambiguity." I didn't use construction lines or anything like that. I even tried it on new Parts to see if my model was the issue but evidently it is not. Please help? Thanks.

[@write2sijovarghese]

Amazing tutorials :D

[@ilduaragonzalezalvarez4932]

Thank you! Really useful :)

[@shashankmalpure1455]

Very Useful...

[@akashdargad3449]

really helpful videos thanks..

[@tia1103]

quick and simple !

[@CADmodel]

In the L-plate with the cylinder...I think one end point of the stiffener you have taken slightly inside the end of the cylinder....
Can we do the same by clicking one end point exactly at the end of the cylinder?

[@write2sijovarghese]

Nice work :)

[@davidgruty]

well... in the case of the cylinder one can make the tilted line of the sketch for the pad go a big higher and the pad will cover everything

[@howENGINEERSdoit]

You are welcome Ashish..!!
Keep watching..!!

[@kitrakkitru8518]

Guruji thanks for the knowledge

[@tranvanduong01]

thank you for yourshare.

[@howENGINEERSdoit]

Thank You..!!

[@howENGINEERSdoit]

Hi Alex,
Thank you for your comment.
Now coming to your doubt, For a stiffener to work, There should be only one opening for the profile you create, and the open end points of the profile should be coincident with the closing surfaces of the corresponding part.
Go through the video again and keep this point in mind.
Get back to me soon with the result.
All the best.

[@cic6112]

Nice video
there is no hatching for stiffner in when we draw cut section.
Then why catia show hatching for stiffner in catia drafting???

[@howENGINEERSdoit]

Hi Nitesh,
The video on coupling is already available in my channel, Please take a closer look..!!
I will include the link to the video under the description above for your convenience.
Thank You

[@vaidhyanathan.s9921]

My doubt clear , thank u bro (pad and stiff)

[@sabirahmed1432]

Nice Video

[@niteshkumarsharma8305]

Thank you Sir.
can you upload video on coupling in multi-section solid defination.

[@wolkantoros]

Thank you so much , I just did my part of this command ( so useful tutorial )

[@howENGINEERSdoit]

Wolkan Toros You are welcome..!!Please share in your wall and among your friends..!!

[@ashishsharma4296]

thank you sir....

[@faridtavakolmoghadam]

thanks for the video. I am doing the same thing that you did in the video but it doesn't work. the two open parts of the stiffener line was created using the 3D project and then removed the projected parts. when I try to run the command it says: topological operators: invalid profile body. what am I missing in this? Thank you in advance for the reply.

[@howENGINEERSdoit]

+Farid Tavakkolmoghaddam dear Farid, if you get such error, it means you have some overlapping sketch entities. In case of stiffener, make sure that the stiffener line touches the face of both the supports. Hope that answers your question.

[@mandalamukesh6486]

Mohammed Shakeel

[@gfberen34]

ALLAH senden razı olsun.

[@howENGINEERSdoit]

Good to know my tutorials are helping you..!!
Subscribe me and get notified in your inbox every time I upload new tutorials..!!
Enjoy..!!

[@FadeToBlack86umit]

thanks bro.

[@howENGINEERSdoit]

Hi Kowndinya,
Please watch the video.
Thank You.

[@Uthael_Kileanea]

Wait... You can still use the Pad command. Just make the sketch higher so it intersects with the cylinder...
Anyway, thanks for the explanation. I couldn't figure it out by trial and error :)

[@antobiju3644]

Hi....Thank you Very Much. I am beginner for Catia......Can u Upload some more videos for basic......

[@jingjielim3634]

Hi, may I know how to deal with the isolated line. Because I face this problem when I was proceed after done the 2D sketch.

[@howENGINEERSdoit]

Hello, you need a closed loop to perform solid operations such as PAD. Check your sketch. Or there is an option to inspect sketch.

[@howENGINEERSdoit]

Hi Anto,
Surely I will upload more videos, Let me know for which topic you need the videos, If it doesn't exist in my uploads already, I will surely create and upload it.
Best Regards.

[@howENGINEERSdoit]

JazakAllah, Thank you for your notice.
Assalamu alaikum Varahmatullahivabarakathu

[@harisainathareddyeragam1822]

But sir the distance from baseline to angle line

[@saiganeshb746]

I have draw gear but I I tried pad option something went coming on dialogue box that like this at the sketch contents several open profiles are some geometry user for constants and you must specify the question geometry to solve the profile ambiguity

[@saiganeshb746]

Please tell me sir I trying number of times bu but error is coming

[@howENGINEERSdoit]

This is happening as your profile must be open and you are trying to do a feature like pad. Inorder to create a solid feature from the part workbench, your profile must be closed. Let me know if you still have doubts.

[@theengineerbaba]

thanks you sir your tutorials was osm
#Theengineerbaba

thank from Spain

[@howENGINEERSdoit]

Hello Javier,
Stay tuned for more videos. Where are you working and which domain?

[@ramanbhatnagar5684]

Hey... Its showing topological operator : invalid porfile body.
What to do??

[@shivanshuudeniya3338]

same here

[@howENGINEERSdoit]

teşekkürler..!! Allah bu hayatta ve cennette mutluluk ve refah ile hepimiz korusun

[@hanger687]

nic

[@howENGINEERSdoit]

Hi Friend,
I'm sorry for the late reply.
Sure, its [e-mail].
Thank you for writing to me.

[@VinayKumar12921]

Hello Sir,,,Your Videos are Good,,I Need Auto Cad Software,,,From Where i can download it ?

[@howENGINEERSdoit]

Gratitude..!!..my pleasure..!!
I think you can download a student version from Autodesk.

[@mohammedzafeer]

Assalaamualikum
this vedio would be wonderful if it had a good Sound,

[@Manikanta-vt7pr]

Thank u for this video i want you that clearly every module with a each command and how to use that command for all catia V5 R20
please provide me that videos thank u again

[@msp3305]

vidio is not clear please sir aap achchhe se video banaya kuch samj me nahi aa rha h ki kaun sa button ka use kar rhe h aap

[@saiganeshb746]

Small problem sir can you please respond

[@howENGINEERSdoit]

Yes sir?

[@saiganeshb746]

If you don't mind give me your WhatsApp number I will show you my problem by picture

[@sambit_praharaj]

you are not audible clearly.

[@SatendrayadavdangerraosaabSKya]

This is a fack