Eye balling then using a fat marker ??....not real precise or repeatable for a precision reference point... The boots are inconsistent...toe caps are not exactly mounted all the same off the assembly line for the same size.. Blade runners are not all properly aligned on the boot... So that needs to be addressed and corrected first before you even look for a 0 balance reference point...
For the COMPANY video on how to use your machine, you aren't even following your OWN GUIDELINES: WEARING EYE PROTECTION????????? That sure is NOT a very good way of conducting yourselves.. It says right on the machine in the video "WARNING: FOR YOUR OWN SAFETY. ALWAYS WEAR EYE PROTECTION" [Except if you are the company showing instructional video on "... HOW TO PROPERLY USE THE BLADEMASTER'S CRM6 CONTOURING SYSTEM" ....]
death2pc so what do you have an issue with? for protection you should be wearing protection as the company instructs.. but isn't showing their customers the safe way of using their own machine for their own Company tutorial... what am I wrong about? if you want to get metal shavings in your eye, be my guest...
So in 2015 Blademaster is still showing you how to profile toe and heel by eye. Helpful.
There should be a universal template to copy. A 3-d lathe or something to just copy the same glide on, same thing with profiling.
If i have had my skates sharpened to a 3/8 but i dont like them what to i do?
what tuuks are those ? also what runners are used?
do you have the slide that show the 'pitching system" (3:30)
Chris Kiley homeholiday
WHY WOULDN'T YOU REMOVE THE BLADES FROM THE HOLDERS AND PROFILE THEM TOGETHER, INSURING IDENTICAL PROFILES?
Because the blades would be touching the grinding wheel at different points and would end up uneven
@@leeallen3947It seems like they should make a grinding wheel that would do both at once. Right?
so they are figure skates without toe picks
Eye balling then using a fat marker ??....not real precise or repeatable for a precision reference point... The boots are inconsistent...toe caps are not exactly mounted all the same off the assembly line for the same size.. Blade runners are not all properly aligned on the boot... So that needs to be addressed and corrected first before you even look for a 0 balance reference point...
Katsotaan vielä toi9.03 kestoinen...
fun😉😉😉😁
For the COMPANY video on how to use your machine, you aren't even following your OWN GUIDELINES: WEARING EYE PROTECTION?????????
That sure is NOT a very good way of conducting yourselves.. It says right on the machine in the video
"WARNING: FOR YOUR OWN SAFETY. ALWAYS WEAR EYE PROTECTION"
[Except if you are the company showing instructional video on "... HOW TO PROPERLY USE THE BLADEMASTER'S CRM6 CONTOURING SYSTEM" ....]
Go up to Winnipeg and tell this NHL Winnipeg Jet equipment guy that to his face...........................
death2pc so what do you have an issue with? for protection you should be wearing protection as the company instructs.. but isn't showing their customers the safe way of using their own machine for their own Company tutorial... what am I wrong about?
if you want to get metal shavings in your eye, be my guest...
Thats the way they do it in the show
Just kidding, youre prob right. Though in practice, almost nobody actually wears the glasses
He’s to savage
the JFK
If i have had my skates sharpened to a 3/8 but i dont like them what to i do?
try 1/2
What do you not like about them. Too much glide, or too much grip?