Wish you guys would do the upper oil pan on the 350z since a lot of people seems to crack them trying to screw in the oil sensor like i just did. (This sucks)
Is there even a reason to increase the throttle body size with the same plenum as stock, even with the plenum spacer? I feel like it probably won't really improve performance much at all. I guess I'd like to see a dyno on if they actually improve performance without other modifications on the car.
From what research I've done on this for my charger and g37 which i did get 75mm throttle bodies for the gains with just the throttle bodies aren't much. I did the upper and lower manifold and the z1 3 inch intakes at the same time so i don't know how much they helped specifically, company claimed 10 whp, they cost over $600 though. They were also a pain in the ass to fit in especially with the 3 inch intakes. Personally if i could go back i probably would have put that $650 elsewhere but I'm not unhappy with them, they look good and they do help some I'm sure, especially with the bigger intakes.
@@sneakypete2656 It's just that the diameter is going to be limited by the plenum and intakes anyway, so if you don't upgrade the plenum and the intake manifold it's really not actually adding much diameter. I think with doing the upper manifold and air intake (larger pipes) it likely would help a bit assuming there aren't flow issues exhaust wise, but really think it probably should be one of the last upgrades done IMO after everything else is good.
I came here looking for the correct position of the throttle body gasket because I really don't know which way to put it in. Nobody shows how I was hopping for the good guys from Z1 that I usually throw happily money in parts to to maybe show me that but... Nop...🥲🥲🥲
Do a video with pathfinder coolant mod.
Can yah do a video on replacing all the hoses plss 🙏🏾
Wish you guys would do the upper oil pan on the 350z since a lot of people seems to crack them trying to screw in the oil sensor like i just did. (This sucks)
I'd really like to see a video about chain tensioner, using the little window
Hopefully you guys cleaned that corroded negative battery terminal
So if you do the z1 plenum spacer, the z1 75mm throttle body and the z1 mspec cold air intake, you don’t have to do any kind of tuning?
Would this require me to retune or would it be ok due to the small change in diameter?
All these videos are great unless you live in California
What if you did the video on a G35 with the coolant lines running to the throttle body???💡
None for the HR/VHR? Or can these work?
When you change it to the 75mm throttle body do you have to change injectors and lines to match or does it matter
No side by side comparison? No before and after dyno numbers?
Do you sell the throttle body adapter only?
Would this work buying 2 and putting it on a 370z?
Good info
Why does this come up lol ??? When I just stripped the top left Allen screw kms.
Is there even a reason to increase the throttle body size with the same plenum as stock, even with the plenum spacer?
I feel like it probably won't really improve performance much at all.
I guess I'd like to see a dyno on if they actually improve performance without other modifications on the car.
From what research I've done on this for my charger and g37 which i did get 75mm throttle bodies for the gains with just the throttle bodies aren't much. I did the upper and lower manifold and the z1 3 inch intakes at the same time so i don't know how much they helped specifically, company claimed 10 whp, they cost over $600 though. They were also a pain in the ass to fit in especially with the 3 inch intakes. Personally if i could go back i probably would have put that $650 elsewhere but I'm not unhappy with them, they look good and they do help some I'm sure, especially with the bigger intakes.
Paired with forced induction they'd do a lot better.
@@sneakypete2656 It's just that the diameter is going to be limited by the plenum and intakes anyway, so if you don't upgrade the plenum and the intake manifold it's really not actually adding much diameter.
I think with doing the upper manifold and air intake (larger pipes) it likely would help a bit assuming there aren't flow issues exhaust wise, but really think it probably should be one of the last upgrades done IMO after everything else is good.
Silicon hose name n part number?
Does the oem intake hose fit on this throttle body?
No. You need the adapter that goes from 75mm throttle body to stock intake
@@codyoneill6091 thank you
is this better than plenum spacer?
I know it's 4 months late but plenum spacer is better
Where 350z supercharger?!?!?
👍🏽
I hate cali for making this illegal to order
I came here looking for the correct position of the throttle body gasket because I really don't know which way to put it in. Nobody shows how I was hopping for the good guys from Z1 that I usually throw happily money in parts to to maybe show me that but... Nop...🥲🥲🥲