How to Battery Conversion SoundTraxx Blunami into Bachmann Garden Scale Climax Fn3 Part 1
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- #blunami #soundtraxx #gscale #bachmann #spectrum
This video series documents how to convert a stock garden scale Bachmann Spectrum Two Truck Climax to battery power with a Blunami DCC decoder from SoundTraxx.
The benefits of doing so are numerous, including:
On-board power means there's no need to clean track
Blunami decoder settings are made directly and easily right on your phone
Soundtraxx has great control and sound sets
Blunami allows the user to control the model with a cell phone
Tools and supplies used:
BLU-4408 Blunami large scale decoder: soundtraxx.com...
Visaton Speaker: www.mouser.com...
Soldering Iron: amzn.to/3tcIlXF
Solder: amzn.to/3nNeOCD
Soldering Flux: amzn.to/3aVD3cO
Kapton Tape: amzn.to/2PLJV54
Heat Shrink Tubing: amzn.to/3aUnSQM
Battery (3400mAh/14.8V): amzn.to/40mvJPQ
Tenergy Universal Fast Smart TLP3000 1.5A Charger for Li-Ion/Li-Polymer Battery Pack: amzn.to/47AS6DF
Rust-Oleum 37686 Custom Spray 5-in-1 Spray Paint, Satin Black : amzn.to/3ssTPM2
Two Truck Shay DCC Install (Track Power): • How To Install SoundTr...
Here are some of the ways you can support the content you love:
/ tsgmultimedia
www.paypal.com...
www.tsgmultime...
tsg-multimedia...
Please share: If you enjoy this content, please hit the "like" button and share it with your friends on social media!
You can join TSG Multimedia on these other social media channels:
FaceBook: / tsgmultimediaface
Instagram: / tsg_multimedia
Twitter: / tsgmultimedia
©2023 TSG Multimedia. All Rights Reserved.
Great work to simplify the wiring. Also, Bachman locos are wired for dual polarity because UK has opposite DC polarity that USA, because of course they do…. So extra wires running through the model to accommodate that issue that can be eliminated as well. Great 1st chapter, can’t wait to see part 2.
Thanks George. Trevor knows his stuff and I learned a lot from making this series with him!
This generation of Climax is actually so old it doesn't have the polarity switch. They started that sometime in the early to mid 2000s, and there would be a second switch for that in the smokebox. This engine is from like 1999 or 2000, before they did that. In engines that have that, I always rip that stuff out as well like you suggest.
It was great getting to finally work with a Blunami. Thanks for all that you and the rest of the team at Soundtraxx do to give the large scale folks great sound decoders that can keep up with the demands of the engines.
hello ,always enjoy your videos,,i was wondering does the blunammi board have a firebox flicker function in it?
Cool. Thanks.
Great video series and perfect timing as I also have a 1st Gen Climax I want to upgrade to Blunami/battery
Did you end up putting new LEDs in the firebox to replace the ones that were on the circuit board? If so, what did you use?
I didn't do anything with the firebox. The goals for this project did not include full use of all the lighting effects. I figure that I will eventually redo the firebox and cab interior lights.
@@tsgmultimedia gotcha
I always liked the firebox flicker but on my gen1 Climax and Shay it never seemed to work that well. From what I can see the Blunami has all the flicker functions built in so should just need the right LEDs for that
When you had the bottom plate of the drive units , why wouldn't you talk about inspecting gears , axle bearings , and lubrication . Where is the follow up to this , it should include replacing bulbs (assumed) with LEDs and firebox