Hello Carter! Thank U for best video, I have question what do You do with "vortex flaps"? (sorry im using translator to translate this part) I know taht when we wont to cut out DPF we should to plug EGR and remove flaps and on the end instal new software. What is our opinion? And where i can buy tahis pipe what U use? Do U have any link on eBay?
Great Video. Can you send me a link for the Auto Cal Tuner settings? I have the device however I do not not have the instructions. Any information would be greatly appreciated. Thanks
What did you use to get those 2 other nuts off on that bracket so you could get the DPF out? Sat here for 2 hours trying to figure it out and couldn’t at all. Any info is appreciated thank you
i have a 2014 diesel cruze - removing these are easy enough but what (if any) needs to be done to the computer? to avoid def countdown, and speed countdowns? mine keeps going into countdown permanent fault codes and want to get rid of that junk...
You need to get it tuned, can’t remove it without tuning it. Hell, some vehicles won’t even let you start the them at all without having filters present.
I have a 2012 chevrolet cruze 2.0 vcdi ltz. Best thing I ever done was to get the dpf delete. At first I went under the car undone the exhaust from dpf then got a bar and hammered out the filter aswell as the cat above it. Took a little while but this way I no my car would pass the visual examination for mot. Once I had all the internals removed I had the engine management light on constant.i then went to a company called ecomax tuning and did the dpf delete followed by a stage 2 remap. I have to say best thing ever the car moves very very well. When you get a dpf delete if you go to a good tuning company they will map it so your car wont smoke. I live in uk and the mot emissions side of it is quite strict but my car passed mot I just had to refit the empty dpf canister to car soon as I got the 12 months mot I the refitted my custom turbo down pipe. I always have a fault code stored on car diagnostic p0030 which is a h02 bank 1 sensor but I never have any lights on dash. If your gonna get this done dont get a company to cut open the filter as the mot will pick up on the weld just get at it from underneath the car
Your can get them from dalessuper store.com dalessuperstore.com/i-23897014-ppei-efilive-autocal-w-custom-tuning-by-kory-willis-stage-2-package-2014-2015-chevy-cruze-diesel.html?gclid=EAIaIQobChMIp7GRj8PH3QIVmrXACh1OuAAlEAQYASABEgJ61vD_BwE
Call.meKaul MPG improved slightly like maybe 1 more than before the mod. With the extra power the temptation to drive fast is there and poor driving habits results in lower MPG.
I have a 12 chevrolet cruze 2.0 diesel ltz executive I have a dpf delete and stage 2 remap plus a few extra mods. Most mpg ive got out of it it 66.5 mpg on a long motorway drive. If I drive sensible around town etc ill get 45 easy if im a bit heavy footed then about 32 mpg but overall thats alot better then when the dpf was on. My mpg use to drop to 18mpg during regen
Called to two companies to get this pipe and whole kit. No luck. Both said that they don't sell it anymore. EPA shut it down. any body have other info as where to get it?
Found a place, they're still working on the tune and I ordered it weeks ago but I can send you an email with a link if you want. I'd like to keep their name out of the EPA's reach.
Carter Anderson okay thanks. I wasn’t sure if I needed to plug them or not. Thanks for your video as well. I’m doing this right now and the video really helps. I started today and got the DPF out but won’t be able to finish until Friday.
I've found a place that is selling the tune software online but to get it I need the ECM serial number. I have absolutely no idea where to find it. Any chance you could help with this?
@@carteranderson32 They're asking for that too. I've got that figured out. I'm just totally clueless on where the ECM is on this vehicle I thought it was the thing on the front of the battery but that's the glow plug controller.
I found it and figured out the serial number. It's the covered thing on the side of the battery. I had to take the battery out to get at it, if you can find the clip you might be able to unclip it with out taking the battery out. Now I'm wondering if you've done anything about the SCR system. I'm a little worried it's going to get clogged with soot.
does anyone know where to get this darn downpipe!! i got the tuner but the guy that sold me the tuner doesnt have the downpipe anymore. Please help if anyone can!
You will have to call around to all the diesel truck performance shops asking for a referral to one that still sells the tune and down pipe. EPA is scaring companies, so no one wants to do business online.
I found a place that's still selling them. I'd like to keep them as well hidden from the EPA as possible so if you want I can send a link to your email or something.
Primeway Dispatch just start ripping wires out, relocate em. Then plug a gameboy into your OBD II, and don’t forget this part is really important load up an original copy of Pokémon yellow and catch a charizard. You deleted your vehicle Good luck☠️
I found a place that's still selling them. I'd like to keep them as well hidden from the EPA as possible so if you want I can send a link to your email or something.
And now, the reliability was just increased by 25% and engine longevity by a good 20%. 😄
Diesels were meant to BREATHE. 😎👍👍
Try inhaling the fumes of a DFP deleted car, I unwillingly did it once. Chances of lung cancer increased by 2000%.🙂
Hello Carter!
Thank U for best video,
I have question what do You do with
"vortex flaps"? (sorry im using translator to translate this part)
I know taht when we wont to cut out DPF we should to plug EGR and remove flaps and on the end instal new software.
What is our opinion?
And where i can buy tahis pipe what U use? Do U have any link on eBay?
I will be using this to help me with the process, thanks!
Where did you get the kit ?
this is basically a Fiat 2.0 multijet engine, also used on Alfa Romeo, and some other GM group cars like opel
For everyone asking about where to get it, etc. start looking for canadian companies
Which ones
You should have finished the video what do you do with the vacuum lines and all the sensors???
Answer for this would be great info?
How about tuning process and what about the lines you removed from the downpipe?
Where can I order the kit from?
I need a kit pipe n tuner where van I get it
@@jamesmelton7147where are you located
This is amazing. Thank you for posting.
What about the convertor? Can u simply leave it in? Or should I just cut it off and put a pipe there?
Where can I buy kit
thanks, used this video as a guide for my delete yesterday.
Hey Boraz! Where did you get your kit from? Thanks.
Great Video. Can you send me a link for the Auto Cal Tuner settings? I have the device however I do not not have the instructions. Any information would be greatly appreciated. Thanks
What did you use to get those 2 other nuts off on that bracket so you could get the DPF out? Sat here for 2 hours trying to figure it out and couldn’t at all. Any info is appreciated thank you
i have a 2014 diesel cruze - removing these are easy enough but what (if any) needs to be done to the computer? to avoid def countdown, and speed countdowns? mine keeps going into countdown permanent fault codes and want to get rid of that junk...
You need to get it tuned, can’t remove it without tuning it. Hell, some vehicles won’t even let you start the them at all without having filters present.
Buddy, from where can i buy the kit?
How do you know what all the sensors are? got a reference material?
what is the dpf pipe made of? Stainless steel or just aluminized steel?
You don't happen to have the # stamped on the dpf do you?
LOOKS SIMPLE ENOUGH . WOULD THE PROCESS BE REVERSIBLE WITH THAT PROGRAMMING TOOL ?
It can be reversed and I did that once for a warranty item to be fixed. Then I deleted everything again.
@@carteranderson32 GOOD VIDEO , thank you
Do you still have the car?
Would you consider selling the tuner?
I have a 2012 chevrolet cruze 2.0 vcdi ltz. Best thing I ever done was to get the dpf delete. At first I went under the car undone the exhaust from dpf then got a bar and hammered out the filter aswell as the cat above it. Took a little while but this way I no my car would pass the visual examination for mot. Once I had all the internals removed I had the engine management light on constant.i then went to a company called ecomax tuning and did the dpf delete followed by a stage 2 remap. I have to say best thing ever the car moves very very well. When you get a dpf delete if you go to a good tuning company they will map it so your car wont smoke. I live in uk and the mot emissions side of it is quite strict but my car passed mot I just had to refit the empty dpf canister to car soon as I got the 12 months mot I the refitted my custom turbo down pipe. I always have a fault code stored on car diagnostic p0030 which is a h02 bank 1 sensor but I never have any lights on dash. If your gonna get this done dont get a company to cut open the filter as the mot will pick up on the weld just get at it from underneath the car
Carter anderson where abouts did you get your dpf delete pipe from, ive searched everywhere in uk and had to custom make one
Your can get them from dalessuper store.com dalessuperstore.com/i-23897014-ppei-efilive-autocal-w-custom-tuning-by-kory-willis-stage-2-package-2014-2015-chevy-cruze-diesel.html?gclid=EAIaIQobChMIp7GRj8PH3QIVmrXACh1OuAAlEAQYASABEgJ61vD_BwE
I bought mine on eBay with the programmer
Newbie here. Have a 14 TDI Jetta with a Malone delete tune. It really flys.
My mom has a 14 Cruz. Who can I get a downpipe and tune from?
They're super hard to find now man.
Hey man Im having issues with my DEF system , want to get rid of it and put this in. Can you please send me a link on where to buy it?
What's your issues?
What are you getting for mpgs after delete? With the way I drive I get 44 average.
Call.meKaul MPG improved slightly like maybe 1 more than before the mod. With the extra power the temptation to drive fast is there and poor driving habits results in lower MPG.
I have a 12 chevrolet cruze 2.0 diesel ltz executive I have a dpf delete and stage 2 remap plus a few extra mods. Most mpg ive got out of it it 66.5 mpg on a long motorway drive. If I drive sensible around town etc ill get 45 easy if im a bit heavy footed then about 32 mpg but overall thats alot better then when the dpf was on. My mpg use to drop to 18mpg during regen
@@willwill-oe9km what source did you use for remapping after PDF and Egr delete
@@anthonysinnott7754 ecomax tuning. Was more money but you get what you pay for
@@willwill-oe9km Diesel Cruzes came out in the US in 2014. So not sure how you have a 2012 one, unless you live some where else.
Called to two companies to get this pipe and whole kit. No luck. Both said that they don't sell it anymore. EPA shut it down. any body have other info as where to get it?
Found a place, they're still working on the tune and I ordered it weeks ago but I can send you an email with a link if you want.
I'd like to keep their name out of the EPA's reach.
@@theTYTAN3 does they have pipe and computer?
@@theTYTAN3 please email me here autos2011@live.com thanks.
@@theTYTAN3 I see its been a year but if they are still around could you e-mail me here in Canada wsbakker@hotmail.com
Need a kit too for a GMC 19 just out of warranty. Clogged Dee Pee Eff. Send me a message if you can. Thanks
Where do you get the oz tuner
Good shyt my man
What time did you use?
Where can l order the Oztuner kit. Any particular store or shop. I searched the internet and this particular kit did not show up.
I've been looking to I dont think they make it anymore since the epa cracked down on diesels
@@treymcwilliams5248 can you find me one. I exported my car and having problems with the Edf. I just want to replace it
Do u still have the DPF? I'm in need of one and I literally can't find one anywhere. She has no power.
Could I buy it off you if it's still in good condition and good?
Where can I get the kit?
What did you do with the two vacuuming lines you didn’t have to reuse?
The vacuum lines are disconnected from the DPF and left to hang free. The new tuning ignores them.
Carter Anderson okay thanks. I wasn’t sure if I needed to plug them or not.
Thanks for your video as well. I’m doing this right now and the video really helps. I started today and got the DPF out but won’t be able to finish until Friday.
Those lines go to the exhaust gas differential pressure sensor. No need to plug them.
Do you have to tune it after
What do you do with those 2 vacuum lines? Just leave them? Cap them?
Cap them and let them hang
@@carteranderson32 morning, how can I contact you?
Hi Carter Anderson what do you do with the vacuum lines
The best thing would be to plug them.
Is it 100 percent necessary to plug them?
How do you plug them?
Are you going to be doing the EGR delete as well?
I did the EGR Delete at the same time as the DPF delete. I am editing the video and will post soon.
@@carteranderson32 Thanks Carter! I'll be installing the kit soon, so I'll stay tune to your post.
Do you have to put the heat shielding plates back on?
I did not put any back on
I've found a place that is selling the tune software online but to get it I need the ECM serial number. I have absolutely no idea where to find it. Any chance you could help with this?
When I bought mine I had to provide the VIN number.
@@carteranderson32 They're asking for that too. I've got that figured out. I'm just totally clueless on where the ECM is on this vehicle I thought it was the thing on the front of the battery but that's the glow plug controller.
I found it and figured out the serial number. It's the covered thing on the side of the battery. I had to take the battery out to get at it, if you can find the clip you might be able to unclip it with out taking the battery out.
Now I'm wondering if you've done anything about the SCR system. I'm a little worried it's going to get clogged with soot.
@TYTAN3 could you help me find this kit with all that is needed? I have a 2014 Cruze and it’s driving me nuts please email at Salvadorg98@icloud.com
@@salvadorguzman9089 I tried emailing you, but it didnt go through.
Can you send a link to the kit?
me too
And me
Do you have a link to a kit I can buy? I can't seem to find It on their website
Look up “DPF delete Chevy Cruze 2.0”on eBay and you will find the same kit I bought.
@@carteranderson32 not anymore. Can’t find anywhere
What did you do with your DPF after you took it out?
Welded it on to the end of the tail pipe 🤔
@@carteranderson32 lol. Did you sell it or just junk it?
Kept it. In case I have to move to a county that requires emission testing. Anyone doing this mod, should do the same. It can always be reinstalled.
Need help finding the parts needed to do this please help
@@carteranderson32 i need some help as well finding parts email is Jacoballan75@gmail.com
Much appreciated thank you
does anyone know where to get this darn downpipe!! i got the tuner but the guy that sold me the tuner doesnt have the downpipe anymore. Please help if anyone can!
Where did you get the tuner
Is the DPF kit still available?
Sorry, Due to law suits, companies are no longer selling tunes or delete kits.
any chance anyone has any leads on where i can still buy this
Where can I get delete kit
Sorry, With enforcement of the law, no one is selling any
Who sells the pipe??
I bought it on eBay with programmer kit
2.0 🇹🇷👍
hello carter, how to order this kit or where we can buy it?
You will have to call around to all the diesel truck performance shops asking for a referral to one that still sells the tune and down pipe. EPA is scaring companies, so no one wants to do business online.
@@carteranderson32 thanks for the answer, but now i'm in florida and next week i ll returne to canada and i ll never find the kit
@@mounderchelli3186 same here im from canada and cant find the kit
Hi, I'm Toronto, where to buy the kit and do you know a mechanic can do it?
My email
Talerocarlosalberto@gmail.com
does anyone know where to get this delete kit from? been searching everywhere.!!!
I found a place that's still selling them. I'd like to keep them as well hidden from the EPA as possible so if you want I can send a link to your email or something.
@@theTYTAN3 eniemann34567@gmail.com
@@ericniemann801 email sent.
@@theTYTAN3 Can you send me one too at wandabreaux3@gmail.com
I'm looking for one too. Can you email me please. I have an f250 6.7 that's deleted. Whitejeremyj@yahoo.com
Hi. Any one knows how to delete DPF on 2018 GMC Terrain diesel 1.6L.??? I need help.
Primeway Dispatch just start ripping wires out, relocate em. Then plug a gameboy into your OBD II, and don’t forget this part is really important load up an original copy of Pokémon yellow and catch a charizard.
You deleted your vehicle
Good luck☠️
Such a bullshit with diesel emissions.
When you say DPF delete does that mean DEF delete. I want to get rid of this tank and all that eviro crap
its emissions delete, so yes the dpf is replaced and def is no longer used
I can’t find them anymore, do you have a phone number ?!
Sorry I don’t, due to the law suits, companies are no longer selling tunes or delete kits.
I found a place that's still selling them. I'd like to keep them as well hidden from the EPA as possible so if you want I can send a link to your email or something.
@@VTwin4Christ email sent.
@@theTYTAN3 sent me please , i have big problem too?chelli.mounder@hotmail.fr
I would like the link to if you don't mind Bigtnice69@gmail.com pleas and thank you
Only for off road use,,lol