How to Replace a Rotted Windowsill | This Old House
ฝัง
- เผยแพร่เมื่อ 31 พ.ค. 2014
- This Old House general contractor Tom Silva shares some tricks-of-the-trade for installing a new, long-lasting windowsill. (See below for tools and a shopping list.)
SUBSCRIBE to This Old House: bit.ly/SubscribeThisOldHouse
Tools for How to Replace a Window Sill:
- Oscillating tool [amzn.to/2Xf1Tew]
- Reciprocating saw [amzn.to/2Wd7R35]
- Flat pry bar [amzn.to/2Wj21gZ]
- Hammer [amzn.to/2EFmwcR] and 3/4-inch-wide chisel [amzn.to/30S4ddE]
- End nippers [amzn.to/2wuUv2U]
- Circular saw [amzn.to/2XeIsCy]
- Layout square [amzn.to/2JM9mPo]
- Drill/driver [amzn.to/2Xb40A1]
- Handsaw [amzn.to/2Quq5qX]
- Hand plane [amzn.to/2WDRzA1]
- Random-orbit sander [amzn.to/2QzsFf7]
- Caulk gun [amzn.to/2K92x9O]
- Dead-blow mallet [amzn.to/2KdSiRQ]
- Pneumatic finishing nailer [amzn.to/2KcXdlM]
Shopping list for How to Replace a Window Sill:
- Spanish cedar [amzn.to/2Wema7K], used to make new sill
- 3-inch screws [amzn.to/2Kf6euD], for pulling out old sill
- 120-grit sandpaper [amzn.to/2MgQU3a]
- Spray primer [amzn.to/2K96LhG], for coating new sill
- Silicone caulk [amzn.to/2wqGJyx], used to seal new sill into place
- 2-inch finish nails [amzn.to/30Qhzaq] for pneumatic nailer
- Minimal-expansion foam [amzn.to/2I5sBA6], for filling void below sill
- Exterior-grade paint [amzn.to/2WdEygR], to match existing window trim
About This Old House TV:
This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information and expert advice through award-winning television, a highly regarded magazine, and an information-driven website. This Old House and Ask This Old House are produced by This Old House Ventures, LLC and are presented on PBS by WETA Washington, DC.
Follow This Old House and Ask This Old House:
Facebook: bit.ly/ThisOldHouseFB
Twitter: bit.ly/ThisOldHouseTwitter
bit.ly/AskTOHTwitter
Pinterest: bit.ly/ThisOldHousePinterest
Instagram: bit.ly/ThisOldHouseIG
bit.ly/AskTOHIG
Tumblr: bit.ly/ThisOldHouseTumblr
For more on This Old House and Ask This Old House, visit us at: bit.ly/ThisOldHouseWebsite
How to Replace a Rotted Windowsill | This Old House
/ thisoldhouse - แนวปฏิบัติและการใช้ชีวิต
Me and my dad replaced four of these windowsills on our second floor in one weekend. Contractor told us entire windows and surrounding structure needed replaced. Saved me over 5 thousand dollars.
Yeah, right way.
Contractors are going to tell you what will be the least amount of work for them with the maximum amount of profit.
@@hawklerfalco9067 right way? Took back the siding and vapor barrier and everything surrounding the window was in perfect condition, not wet or any rot. Why would I replace it all when one piece of wood needed replaced bc previous owner forgot to caulk around the bottom?
That’s what sucks. You always have that doubt because a lot of these contractors just can’t be honest.
@@CheeseBae "Some" contractors, not all.
The screws to help the prying was on point!🔨
Tommy Silva is the MAN. I have been in the trade for 35 years and I still learn things from him.
A video that shows you four tips in about 15 seconds...pure GOLD! This is excellent!
I have a project to replace the window sills on a tired old church. Of all the TH-cam vids I have seen “and many were very good” this one has been the best.
Tom Silva is the OG. I wish I could say sawr like him
He took three measurements and then walked over and started making cuts. Didn't even write anything down or draw a diagram. When I take a measurement, I walk over to the piece of wood and I already forgot what the hell the measurement was.
Master Carpenter Builder Tom truly likes what he does. So taking and remembering measurements is easy because he had his heart in what he does!
No he did. They just didn't show it.
These guys are badass
I write my measurements down and still make the cut wrong the first time
I not only forget the measurements from the first time I measured-I forget that and I then I cut it wrong. Then, the second time it’s pretty close and it’ll do. Caulk and paint can make me the carpenter I ain’t.
This video saved me. I replaced two sills today. I used pre-made PVC sills from big box stores. Removing the sills were tricky but with this video, I could remove them in minutes.
Lucky you! I'm not seeing pre-made pvc sills that come anywhere near the thickness the one they removed.
Tom Silva is one of the greatest preservationists of the 21st century.. I have learned so much from this old house and I owe alot of credit to him and the show. They are a big part of why my small contractor business does so well.
Another great video. AND, what I enjoyed the most, was the home owner right there not just watching, but DOING so HE can learn how to take care of his own home himself! Two thumbs up to Tom for being not just a doer, but a teacher!!!
Tom is such a boss that he didn't even need to test fit it before he layed the bead of caulk because he knew there was no way that it wouldn't fit.
Been watching TOH over 30 years, never gets old!
What a perfect video, well shot, well explained and easy to follow. Thank you.
Tom is a master carpenter...so impressive with all the little tips he gives but his array of tools surpasses what I have by twenty-fold at least.
You my man are the best amazing work Tom and with great knowledge comes great responsibility .
I was able to replace a window sill following this video- thanks so much for making it simple and easy to follow!
Is there a video for doing this for the top wooden trim casing piece of an old wooden window ? I need to do that with a few windows.
A great explanation. You have to respect such a competent craftsman.
Tom Silva is the man!
Always has the right tool and the proper piece of wood always helps.Color me jealous. Great job.
Tom Silva Is a Master Craftsman.
the best video on youtube on sill replacement.
I Totally Agree With You. Most of them video in Low Light or You Cant See What They’re Doing!
Tom. Amazing Crafstman! Thank you for sharing the video.
Awesome. 👏
Mr. Silva, you are a damn good carpenter. I thank God for good craftsmen, like yourself, who are happy to help and teach. Thanks!
A beautiful job. Well done !
at 2:58 the slap of tom silva is deadly lol
Wood is scared of Tom Silva
LMFAOooooo
i need to do this soon. i have 1870 old house with a back window sill thats rotting. This video will be a perfect guide. Thanks.
Is there a video for doing this for the top wooden trim casing piece of an old wooden window ? I need to do that with a few windows.
Thank you so much. You are a great teacher !
thank you, couple of great tricks in there with the screws for removal an the spray foam.
They make insect proof foam - what I would use around exterior windows because carpenter ants loved my windows and surrounding wood! And of course low expansion on the sides.
Niki T - in England,it's called a "drip groove"; a groove made underneath a sill to make water drip from it,rather than continue back towards the house.
That groove idea was something I didn't know!
Great replacement Video, one critique i would suggest priming all raw with a oil primer, before laying your sealant.
Where i live Water rot is due to the capillary water action that will exist in all wood causing expansion and contraction of the wood (as im sure you know) Using a good oil primer to seal the capillaries(and the surface) will insure the piece NEVER rots.
Oil for sure. We use fine paints of Europe oil based undercoater on all six sides of any boards when doing restoration.
@@ryane6719 What, specifically, do you use ?
@@sbennet1447 exactly what I said is what we use lol.
Tom is very knowledgeable..I liked Norm as well...
I love this kind of work, just enjoy doing it !
Looks like a very light stand and portable very well done
Awesome, this is exactly the job I have to do on my house
Thanks - this was really useful for a project I'm currently working on.
great job..love old windows instead of changing it out for vinyl
You make everything look easy Tom😊
Thank you so much this video really helped me!
You are so helpful!! Needed this for this weekends project
Looks pretty straightforward, until you have to do it from a ladder on a second story window.
Rent and build a scaffolding
I make a list of the things I need to get done high up on my house. Then when I take some time off from work I rent a man lift. Then I attack the projects on the list.
2 years ago I scraped and painted all the trim high up, repaired a chimney and fixed my slate roof. It was about $700 for 3-day rental of the man left. I had an estimate for $2,500 to repair the chimney. I saved a lot by doing this stuff myself.
@@JohnDoe-pt8vt a man left is easier to rent and set up and use. And much safer than scaffolding.
He is really good! Great to see American craftsmen at work
I'm currently doing a sill replacement on a pair of side-by-side windows on a house built in 1946 in Ohio. The sill is rotted because someone thought it was a good idea to fully caulk the weep holes on the storm windows. 2 of the 4 counter weights' ropes broke, so the weights are sitting where the sill needs to go which is blocking me from sliding the new sill in. I'll be making a piece of wood to force them up and out of the way so I can slide the sill in. Like most things, this is proving to be much more work than expected. This video has been a great help.
These videos are incredibly useful for homeowners who like to do their own handyman work. Thanks!
PERFECT TIMING! 😊😊
I need to start back on working the exterior of my house again. (Windows being one of the projects)
Beautiful house which had been horribly neglected for decades.
I'm in the process of trying to revive it. 😊
1931 Victorian style ...
Oh my, right is what I need now, thank you so much the clear video!
That sill cut is pretty common and available at most home supply stores; and they come primed as well. Much easier and less expensive option.
A great guide for a guy to follow, thanks.
excellent job a pleasure to watch, professional guy , i do this type of work now and again being a carpenter, this guy is laid back and professional in his approach witch shows years of experience.
Watching this video, half way thru, and I am already exhausted !
got to say that saw you have is one of the best tool i ever used i got 3 of the porter cable saw boss 345 the video was also great
Tom is the man!!
Good tutorial and good job. Bravo.
Brilliant. Some great tips
Just what I needed, thanks
Excellent work - thank you! :)
Very informative. Thank you!
nice video im building a playhouse for my daughters im new im learning all this stuff ,,, I was wondering if that sill flat fron that bottom how is going sit on the small strip that I see ...that small strip has that same angle just to know ,,
I unfortunately have several sills that are in bad condition. I'm sure I'll be watching this video several times to get the steps right :)
@James Draper III You've posted this link how many times now??? Time to cool it, ya think??
Me as well. Rotted to dust basically
after 1 window you'll be a pro for sure.
For anyone else, I would recommend starting with the windows people see the lest of. Then progressive to the prominent windows.
you make it look so easy!
A true master.
Great tutorial
That was extreamly helpful
Great video. Thanks for posting
Tom’s tip on removing an old sill is great! I hate replacing rotting window sills (and often the brick mold) but once it starts rotting rip the bandaid and replace the entire dang thing. However, I go to PVC every time. I buy the sill and the nose.
I tried pulling off the brick mold, and the entire window started coming with it. Is the brick mold supposed to come off? This didn't happen with the brick mold around the doors.
@@buzoff4642Yeah, if you look under the paint your brick moulding is stapled to the side jamb (frame). During construction your entire window was inserted, from outside as a unit. Yours is a more recent generation of construction than the house in this video. Your brick mold is also nailed on the outer perimeter, through the fibrous sheathing and into the house framing that forms the rough opening. What I don't know about this style, is how extensively they shimmed the side jamb into place. Any attempt to remove the brick mould, perhaps one stick at a time, should include that consideration. You want to keep the jambs in their current state of plumb and square. Not sure how you provide bottom support on a replacement sill for one of this style but there's probably a way since the jamb will often extend below the sill on these types. Good luck!
@@_SYDNA_ Experience working on 2 of my windows, window 1, trying to take off the brick molding, entire window started to come out!, window 2, replacing the exterior sill, discovered sill had staples/nails coming up from below into the brick molding. SawsAll to cut the nails/staples going from under sill into brick molding, saw grabbed the nail and ripped a chunk of the lower brick molding out. Yeash, this is no small job.
Thanks for the great video.
Thank you so much for this video
Damn this guy is good. I am always amazed
I enjoy watching these...Tom has a plethora of building techniques! Now I'll go look up plethora. 😊
Jefe, would you say I have a plethora of piñatas?
@@nicksoapdish9478 I dunno...I never looked it up! No soy el Jefe...I'm just a little Indian! 😁
@@michaelfuller2153 I would not like to think that someone would tell someone else he has a plethora, and then find out that that person has no idea what it means to have a plethora. 😝
Nice work!
The old man is incredible
Thanks Robert :)
You sir are my new fave TH-camr
I want this guy working on my house he know his stuff I've seen lots of his work
Mr Dblock .. this man very skill... his profesdional work... hihihi...
Đây là cao thủ võ lâm trong ngành xây dựng
Thanks Tom.
He makes it look so easy
Second nature for Tom Silva. 🙊
That was a lovely job to watch 😍👌
Very useful information...
wow. excelent job
Thank you!
Tommy is awesome.
"good for the next 50 years" and I do believe him lol.
Third world houses are better, and last for hundreds of years 🤣🤣🤣🤣 we don't live in rotten houses
@@machin9267 this statement makes no sense all buildings need maintenance and wood rots no matter what country your in
@@g.pblack507 the thing is that a lot of house in the 3rd world are not made of wood, they're made of bricks. I'm from Honduras and we were middle class. The house was very nice and I'm telling you is going to last a long time because they're not made of wood. Homes can be made of bricks because they have no insulation.
@@favioescalon528 I'm not desputing that. I'm saying that all buildings including brick and metal need to be maintained. Just because the house has some rot doesn't make it a bad building.
@@favioescalon528 also brick buildings will eventually need to be repointed as brick joints crack and fail.
This guy is a magician.
Is there a video for doing this for the top wooden trim casing piece of an old wooden window ? I need to do that with a few windows.
Thank you.
The BEST!!!
Caulking job looked bad but I'm sure u fixed that great video
Love ya’ Tom. Can you show how to operate a makita impact. Please.
This old House craftsmen!
Beautiful....
Superb i like it. Why do not we use pine or cypress wood?
great video
50 years from that date, the home owner wants Tom back to replace it again, and Tom gets up to do it.
I'd ask how Tom would be living in 50 years but I imagine he fixes himself up all the time.
Nothing last forever guys.
Im sure Tom will fix God's house
Can you make a video on how to repair or replace concrete window sills?
Mr Tom you know what materials used for outside work never used regular silicone
Just one thing though. Calking does not bond well to bare wood as its structural composition has no way to penetrate the wood fibers and eventually will peel off. It's best to always prime bare wood with a strong wood primer before applying caulk. The primer becomes the bonding agent between the wood and caulk. The finish coat will bond to the caulking surface.
Isn't that happening at 3:23?
@@calvin7330 To the sill itself but not to the window framing at 4:10
Could you please show me how to patch places where post have been replaced that are smaller than the original post because wood is showing up top. I need to fill and seal to keep it from rot or rodents?
Hi can you tell me how to remove limestone ledge? from under Windows that go all the way around the house. We have aluminum siding and have the Windows then under the Windows is a limestone ledge then under that is brick wall.
Any tips tricks or certain tools to use any videos on this you could recommend. Thank you. We want to remove the limestone ledge but be able to put them back on after insulation is put in the walls of the house.
Thanks
I have an INTERNAL cracked, old rotted sill I want to replace with a red oak sill. Am I going to have to remove the interior window trim?