I would recommend soaking the clutch plates in gear oil for about a day before running it, if you put oil in the gearbox and just let it sit and rotate it a couple times once in a while that’s ok too, very nice video 👍 enjoying the build
As someone who is rebuilding a banshee from the frame up, working a full time engineer job, helping my parents, and taking care of a home...you gotta understand these things take up a lot of time. I think he’s moving along fast, I’m struggling to keep up with him!!
Haha, thank you for the love guys; yes it can be really time consuming; gotta remember it takes me about 3x the normal time to complete a job because of the filming and editing. I'm gonna bust my ass harder though to get this thing running for you guys though 🤘
You have major talent bro! Amazing work, Ive been fully restoring my 1986 TRX250R turning into a restomod since about the same time you started yours and i Know all of the time and money it takes! Keep up the good work! Really appreciate the videos, they have helped me out alot with my build!
Man I dont know how more people dont hit the Thumbs up!!??? Mike puts alot into the Quality and takes tons of time to show us how he does his Top Natch work...Takes 1sec to hit the like button for Vids we fallow....I think its more hatin and jealousy because 1sec isn't even laziness! I swear 60% of people are shitbags on the net
Just got done last night binging all of the 250r videos.. annnnd he releases this and im rewatching it again lol. Can't wait to see this thing complete.
Good job heating the case in oven but another tip is freeze the bearings over night and heat the cases like you did and the bearings drop right in. I learned this from a old head
@@MichaelSabo My phone does the job too, but I don't have enough light in the shop yet to get your clean footage. Are you using only the light from the ceiling or something to complement? Thanks
@@MichaelSabo Not surprised to hear that. You are a man of many different talents. Still curious to see if you can someday take on an engine swap project like the ones those polish guys do. They struggle with the coast of building coz they get their parts shipped from the States. They don't usually show the whole project step by step just a time lapse. You would make a lot of backyard builder's life easier. JUST A THOUGHT CHEERS MATE ! YOU ROCK!!!
@@addysdaddy2652 shoot me an email at michaelsabo350@gmail.com and let me know what you need. I have a few parts left and most of the stock bolts if you need those!
![PASULOL รามเกียรติ์ ตอนที่ 4 นนทกพบรัก [Ramakien Ep.4: Nonthok in love]](http://i.ytimg.com/vi/tMUQgmZzf_A/mqdefault.jpg)
Thank you for watching everyone! For more detailed videos on the engine build, please see the description of this video! 🤘
great video man
Dude your gonna have to do a hybrid build or something top yourself keep going your doing great
Thank you Jake!
A hybrid build would be sick; maybe I will do that in the future!
Start those engines at the end these would be much funner to watch
Everybody is talking about the build, but can we appreciate all the editing and time put into the process in making the video look this good?
Wow man, thank you for acknowledging that; I've been focusing on the quality of my editing!
You got to appreciate the time and effort that goes along with these builds keep up the good work 👍🏼
Thank you for the appreciation man!
I would recommend soaking the clutch plates in gear oil for about a day before running it, if you put oil in the gearbox and just let it sit and rotate it a couple times once in a while that’s ok too, very nice video 👍 enjoying the build
Thank you for following the build Tim! I did indeed soak the plates and fibers; its great advice!
It’s awesome to see where you started and all the work that you have put into this build. Love it Mike!!!
Thank you for following the build man!
Why you blue balling us like that man we all want to see it in the quad but love the videos
Pushing content so he can get paid, understandable tho
As someone who is rebuilding a banshee from the frame up, working a full time engineer job, helping my parents, and taking care of a home...you gotta understand these things take up a lot of time. I think he’s moving along fast, I’m struggling to keep up with him!!
It's something to watch we all bored
Haha, thank you for the love guys; yes it can be really time consuming; gotta remember it takes me about 3x the normal time to complete a job because of the filming and editing. I'm gonna bust my ass harder though to get this thing running for you guys though 🤘
You have major talent bro! Amazing work, Ive been fully restoring my 1986 TRX250R turning into a restomod since about the same time you started yours and i Know all of the time and money it takes! Keep up the good work! Really appreciate the videos, they have helped me out alot with my build!
Hey man; thanks so much for the compliments! I'm glad my videos can help you out; good luck building your R as well!
That was the best 250r motor assembly, I love the way you show it all. Keep up the work man.
Awesome Mike! advanced work done by a proffessional. Cant wait to see the bike done and what more your channel will bring on in the future!
Thank you for the compliment and for following my channel man; the support is what keeps me going!
Thumbs up to your standards and transparency.
Really happy for you
Thank you bro! 🤘
Last night I bought a blaster for 2500 and it’s absolutely mint. I know you did the fix on the one a while back but definantly should be next build
Man idk if 2500$ for a blaster is worth it even if it is mint
I may do a Blaster in the future; that must be one crispy machine for 2500!
Man I dont know how more people dont hit the Thumbs up!!??? Mike puts alot into the Quality and takes tons of time to show us how he does his Top Natch work...Takes 1sec to hit the like button for Vids we fallow....I think its more hatin and jealousy because 1sec isn't even laziness! I swear 60% of people are shitbags on the net
Well shit man; I sure do appreciate when you do hit the like button! Thank you for the constant support and for following my videos Chad 🤘
Another great video as always brother 🤙 That engine is a piece of art ! 👍
Thank you bro! 🤘
Just got done last night binging all of the 250r videos.. annnnd he releases this and im rewatching it again lol. Can't wait to see this thing complete.
Haha, thanks so much for always watching my videos Cody!
@@MichaelSabo No problem. Love all the videos. Your editing along with how you explain everything that you're doing is great!
Absolutely BEAUTIFUL! Fantastic job bro!
Thank you Adam Odom!
Tons and Tons of Upgrades!!!!! The Build is awesome the Music was incredible💯Love your content dude ,Keep up the amazing job you are doing👍🏼
Thank you for the feedback Eduardo Lugo, I appreciated you watching my video!
i’ve been hear since 2k and it’s cool to see you grow and improve over the years
Thank you Connor; it's because of guys like you that I'm able to keep going and continue to do this. Thanks again for the continued support brother!
Love the vids man can’t wait for this beast to finally run 🤘🏽🤘🏽
Thank you bro! 🤘
You should put a factory racing stator cover on it
Cant wait to see it finished👍🏻
The fact that you're rockin' the Diet Dew makes this so much more rad!!! 🤘🤘🤘🤘🤘🤘🤘🤘🤘
Lmao 😂 I do drink a low of that
man you deserve so much more subscribers thank 50k i think you should have over 1mill
Good job heating the case in oven but another tip is freeze the bearings over night and heat the cases like you did and the bearings drop right in. I learned this from a old head
He did. He showed when he dropped them into the bottom pullout freezer drawer
Amazing to see it for the first time when you do this! Thanks for watching!
Wow, amazing job! It's almost done, unfortunately it's still not gonna be able to touch that banshee!
For sure in the straight line
Great vid Michael, thanks for making it!
Looks badass!
Huuuuge difference 👍🏻👍🏻
Sick build bro. You got mad skills
Thank you bro! 🤘
Epic video. I wish my footage was this quality. Greetings from France!
Thank you bro! You can do it too! My main camera is a Galaxy S8+; nothing special!
@@MichaelSabo My phone does the job too, but I don't have enough light in the shop yet to get your clean footage. Are you using only the light from the ceiling or something to complement? Thanks
Pete Hager and Michael sabo are small channels but such good channels
Petes getting close to 100k! Thank you for the love Angel; hopefully the channel will grow larger!
@@MichaelSabo take on a muscle car engine. You Will get the numbers.
I see the Corvette in the garage 😂😁
@@MxHDXB for sure; I actually built a C5 before I started my channel and considered making a channel based around the corvette.
@@MichaelSabo Not surprised to hear that. You are a man of many different talents.
Still curious to see if you can someday take on an engine swap project like the ones those polish guys do. They struggle with the coast of building coz they get their parts shipped from the States. They don't usually show the whole project step by step just a time lapse. You would make a lot of backyard builder's life easier.
JUST A THOUGHT
CHEERS MATE !
YOU ROCK!!!
@@MxHDXB love the idea bro! And thanks so much again for the compliments and support!
Sweet can't wait to hear it fire up 👍✌
Amazingly perfect
Thank you bro! 🤘
Sweet build so far!
🤘
Hey man you need to show 2 vintage some stuff😀, love the videos tho man keep it up
Haha, he is more than welcome to take ques for his projects!
The journey was long but it is finally completed
Damnit. Yinz must have NASA wifi. But im happy to see this video out!
Thank you for watching bro! 🤘
top notch build man
Thank you as always bro! 🤘
@@MichaelSabo get to work and stop playing on youtube lmao wait this is your work lol
Great job, boy very tedious stuff its beautiful
Thank you Restoration work!
Awesome video 🤙💯
makes me want to go and do it to my warrior 350
Thank you bro! 🤘
Love the vids man keep up the awesome work
Thank you Braedybot 180!
Going to be nasty Mike!
Hell yea it is Nick!
Good job mate hope it goes great
Honey: what ya cooking in the oven. Him: oh just my atv engine casings
😅
Bro I really do love your content
Thank you for watching man 🙏
Your cool men
Mike to a update of your Yamaha banshee !!!
Okay; I will make one!
Thank You!!💪🏻
Bing Ding Ding Bing Ding I can hear it run. u excited I'm excited. U putin it in 2 morrow or putin out the vid 2morrow. huh huh Honda. Wick On ✊
I'm excited as hell man! Should have it started this week and a video up too hopefully!
At 16:35 is that a built-in turbocharger? Supercharger? Or is that something else?
That's the water pump
JOÃO RAMOS CORREIA lol my bad
this thing is going to be sick any idea of anyone who has cases or makes them i cant find any anywere
Thank you Mason; ESR makes cases and Mod Quad is making billet cases; I think you have to call them.
Will you do a Suzuki LT-R/LT-Z 400 or Kawasaki KFX 450R quad down the road?
Anything is a possibility man! I love the LTR
how long does a rebuild like this take for a shop???
It is all dependent on the parts. If you have everything, it can be done in 1-3 days even with vapor blasting and powder coating.
Hey mike. If I was you I spend the 250 and get a hydraulic clutch. 100 percent worth it.
I agree; they're great; I have one on the Banshee. That may be a mod soon after the build; I'll see what it feels like in this setup.
Brah what's next how to install the valve caps and gas cap???? C'mon man finish this bitch haha love the build and the channel
lmao; trimming tire hairs
All jokes aside I do love your thoroughness and attention to detail.
yesssir
Man put the dam thang on you can posted them video later
😂 I hear you man
Do you still have the stock bumper that was on the front of it and Would you be willing to sell it lol
It was a Graydon Proline and it is sold; sorry man!
It's OK thank you for answering I just found you and I'm currently building my very 1st 250r also you are very helpful
If you have anything including bolts nuts that are stock that you would be willing to so I would gladly buy them off you
@@addysdaddy2652 shoot me an email at michaelsabo350@gmail.com and let me know what you need. I have a few parts left and most of the stock bolts if you need those!
@@MichaelSabo email sent thanks man you made my day lol
Niceeeee
ini mesin apa?
Cleen buld
👌🏼💪🏼🤙🏼
Bye
A guy your size would benefit far more. If you used a CR500cc two stroke motor.
Anyone know the song from 10:30 to 12:57
Dim - _91 nova
Jk
I stopped everything to watch this video.
Thank you for doing that; you're the man!
7th comment
Mike send me a free hoodie.
First