Good Day Sensei ! One question according paint job, so after black painting you put tamiya masking tape then you cut on car shapes of Windows? Scratches do not appear ?
Hello. Thank you very much. I will explain the order of my body painting. 1, ABS primer improves paint adhesion. 2, paint black for windows. 3. Put Tamiya's masking tape on the window and cut it along the window frame with a cutter. 4, Paint with body color. I don't think the scratches will be noticeable because it is cut along the window frame with a cutter. If you do not reduce the adhesive strength of Tamiya's masking tape, the paint may come off. Do I understand your question?
@@ksdsmondotrash thank you for the link to tamiya products. I've tried it with a marker pen on a 1/27 mini z but it didn't turn out so well and the lines started to fade here and there after about several months or so!
@@ksdsmondotrash the pen is just a fine tip marker pen. The translator may be misleading. The body is a mini z . Your help is appreciated thank you once again
![HYUNDAI PONY 1/24 ACADEMY Model car build [Full version]](http://i.ytimg.com/vi/6srSmMOGM2A/mqdefault.jpg)
ボディメーキング、手の入れようが半端なく凄いですね。
いやあ、穴あけだけだったので、そうでもないんですけど、ディティールも少しだけ欲しくなってしまって・・・(笑)(*'▽')
穴と網がカッコいいです！
網はけっこうお高いんですが、効果は抜群ですね(笑)
かっこいい！！
しゃかなさんの希望はC73でしたね。次々回あたりにやりますのでお楽しみにしないでください(笑)
先生18インチホイールありがとう御座います
コースと共に大切に使います
この前C71のバッテリーを80mAhに変えました１時間ぐらいはしります充電は２時間ぐらいかかりますがジョイントマットテクニカルコースで7.42秒出ました
50%で8.05秒
効果あると思います
先生がやればもっと速いかも
バッテリーで速さも変わるんですかね？(*^-^*)長く走れるのは魅力的ですね
２週間前は9秒切れませんでしたのでウデは無いです
改造前のベストは8.2秒でした
練習すれば結果が出るという(笑)先生は報われる努力以外しないタイプなので、ラジコンはいい趣味になりました(笑)
Good Day Sensei !
One question according paint job, so after black painting you put tamiya masking tape then you cut on car shapes of Windows? Scratches do not appear ?
Hello. Thank you very much. I will explain the order of my body painting.
1, ABS primer improves paint adhesion.
2, paint black for windows.
3. Put Tamiya's masking tape on the window and cut it along the window frame with a cutter.
4, Paint with body color.
I don't think the scratches will be noticeable because it is cut along the window frame with a cutter. If you do not reduce the adhesive strength of Tamiya's masking tape, the paint may come off.
Do I understand your question?
@@ksdsmondotrash Yes thank You very much !
先生こんばんは！ボディメイカーの本領発揮ですね〜！
C72のボディカッコいい(*´∀｀*)
超絶技巧でカッコいいのにターンテーブル手回しっ(^^;
暇なんて無くても、次回の動画楽しみにしてます(^^)
こんばんは！走るのも塗るのも、どちらも楽しいですね。ラジコンは塗ったボディで走って楽しめる。これがプラモデルとの違いですね。さすがにディティールはプラモデルの圧勝ですが(笑)雑談動画を楽しみにしている人なんて、もりあ～たさんくらいのもんです(笑)
Can you please tell me if you use a black marker pen to outline the door gaps and also the size of the marker pen tip?
www.tamiya.com/english/products/87131_133panel_accent/index.htm
When I draw a line, I use this Tamiya product. It's a brush, not a pen.
@@ksdsmondotrash thank you for the link to tamiya products. I've tried it with a marker pen on a 1/27 mini z but it didn't turn out so well and the lines started to fade here and there after about several months or so!
I don't know the pen of Mini Z, but I draw a line with Tamiya's panel line color and protect it with clear UV protection from above.
@@ksdsmondotrash the pen is just a fine tip marker pen. The translator may be misleading. The body is a mini z . Your help is appreciated thank you once again
Tamiya's panel line color is easy to buy in Japan. I hope you can get it in your country as well.
先生 あざーーーーす 届きました＾＾
楽しんでください！(*'▽')
@@ksdsmondotrash さん 開封動画も作りまーす
@@HobbyCityTV そんなそんな(笑)ただ走ってみてくださいな(^o^)