Had a 2000 given to me for free, he said it needed some kind of screw on the rear swing arm, I took it, the swing arm bearings were destroyed and one of the screws was worn half way out, bought the swing arm roller bearings with outer races and seals kit, with o-rings washers and aluminum bushings, also bought an used screw for the one side, Took the rear diff apart, (it was nasty and had bad bearings) replaced all the bearings and seals, (including the needle bearing on the drive pinion gear) I removed the roll pin holding that needle bearing by drilling it out on a bench drill press, and installed a new roll pin afterwards, the tie rods were worn out, bought a whole tie rod kit and a front master cylinder, put a new battery and this thing runs like a champ!
Thanks for this vid! I have a 2002 2WD which is in pretty good shape for being used. One thing...I am able to change the rear differential oil w/o dropping the skid plate, it drains from a bottom screw on mine.
Finally a video on my machine! I have a 2000 2 wheel drive. Way better shape than this one. I guess in my case less is more. No speedometer to leak diff oil. Can you do a video on how to change the bushings, and remove the shocks? Thanks!
Thanks Bob. And thanks for the comment! Let us know if there is anything we can help with. Check out: th-cam.com/video/X0AdFxkJiOg/w-d-xo.html for more tips. And: www.ebay.com/str/midnebraskamotorsports for all your parts.
Thanks Rusty. Appreciate the comment and for watching. Let us know if you have an questions! Let us know if you need parts: www.ebay.com/str/midnebraskamotorsports
Heck yea Hunter. Upload some videos of it. I'd love to see it!! Thank you for watching and the comment. Check out our website if you need parts! www.midnebraskamotorsports.com/
Wow, thanks for the very informative video. Do you have any videos for putting a winch on a kawasaki prairie 360 4x4 2011? I've not been able to find one. Please advise, and thanks in advance.
Is this a question or a comment? Thanks for watching and the comment. Have you watched some of our other videos on this same model? Also if you have need parts check out: www.ebay.com/str/midnebraskamotorsports
Ricardo. It only runs if you are giving it gas? You definitely need to turn the idle up. Is the choke working? Hit that subscribe button for more videos on the prairie 300.
Yes, not a bad deal. Is it 4x4? Thanks for watching and the comment. We have hundreds of videos yet to post. Hit the subscribe button so you are notified when we get them posted. Also check out: www.ebay.com/str/midnebraskamotorsports
All time 4x4 on these models Nathan. They didn't come out with selectable until they 400s I believe. Thanks for watching and the comment. Make sure you hit that subscribe button!
I have on like this and that what you say is for choke is actually a decompression value the choke is on the Handel bar left bottom
Glad you commented and clarified that! Thanks for watching!
Had a 2000 given to me for free, he said it needed some kind of screw on the rear swing arm, I took it, the swing arm bearings were destroyed and one of the screws was worn half way out, bought the swing arm roller bearings with outer races and seals kit, with o-rings washers and aluminum bushings, also bought an used screw for the one side,
Took the rear diff apart, (it was nasty and had bad bearings) replaced all the bearings and seals, (including the needle bearing on the drive pinion gear) I removed the roll pin holding that needle bearing by drilling it out on a bench drill press, and installed a new roll pin afterwards, the tie rods were worn out, bought a whole tie rod kit and a front master cylinder, put a new battery and this thing runs like a champ!
Thanks for this vid! I have a 2002 2WD which is in pretty good shape for being used. One thing...I am able to change the rear differential oil w/o dropping the skid plate, it drains from a bottom screw on mine.
Finally a video on my machine! I have a 2000 2 wheel drive. Way better shape than this one. I guess in my case less is more. No speedometer to leak diff oil. Can you do a video on how to change the bushings, and remove the shocks? Thanks!
Great description of repairs
Thanks Bob. And thanks for the comment! Let us know if there is anything we can help with. Check out: th-cam.com/video/X0AdFxkJiOg/w-d-xo.html for more tips. And: www.ebay.com/str/midnebraskamotorsports for all your parts.
Good video, nice overview straight and to the point, good job. 👍
Glad it was helpful! Let us know if you need anything! www.midnebraskamotorsports.com
Very useful information.. thanks
Thanks Rusty. Appreciate the comment and for watching. Let us know if you have an questions! Let us know if you need parts: www.ebay.com/str/midnebraskamotorsports
I have a 4wd with a clutch kit in it, and I'm turning 31 inch outlaws. I'm gonna do big bore too
Heck yea Hunter. Upload some videos of it. I'd love to see it!! Thank you for watching and the comment. Check out our website if you need parts! www.midnebraskamotorsports.com/
Wow, thanks for the very informative video. Do you have any videos for putting a winch on a kawasaki prairie 360 4x4 2011? I've not been able to find one. Please advise, and thanks in advance.
Bryant. Great idea for a video! Keep an eye out on our channel. We will work towards getting one posted for you. Thanks for the comment.
Sounds great, and thanks in advance.
I'd love to see you do a video on how to set up a rear diff with shims. Mne is making noises.(I don't ask for much do I?) Great video BTW.
Great idea for a video! Keep an eye out on our channel. We will work towards getting one posted for you. Thanks for the comment.
Very interesting
Love to see comments like this. Thanks for watching and the comment. Let us know if you need anything: www.ebay.com/str/midnebraskamotorsports
I have a prairie 300 and I'm able to sit the very back of the seat and pull start it without getting up
Where does all the fuel lines run to from the tank
choke on the left handlebar....compresion release by the pullstart
Is this a question or a comment? Thanks for watching and the comment. Have you watched some of our other videos on this same model? Also if you have need parts check out: www.ebay.com/str/midnebraskamotorsports
What can I do, my 2001 kawasaki prairie 300 4x4 only stays on with the throttle on, any recommendations
Ricardo. It only runs if you are giving it gas? You definitely need to turn the idle up. Is the choke working? Hit that subscribe button for more videos on the prairie 300.
Hi, I have exactly the same problem, did you solve it? because I can't find the fault
I Have a chance to get a 1999 for 1800$, is that ballpark?
Yes, not a bad deal. Is it 4x4? Thanks for watching and the comment. We have hundreds of videos yet to post. Hit the subscribe button so you are notified when we get them posted. Also check out: www.ebay.com/str/midnebraskamotorsports
@@MidNebraskaMotorsports - didn't get it. It wanted to die while idling. Found a Honda Foreman 2003 with 1100 hours.
Where is the 4x4 switch lol
All time 4x4 on these models Nathan. They didn't come out with selectable until they 400s I believe. Thanks for watching and the comment. Make sure you hit that subscribe button!