hi! I have a hard bricked s4 clone with mt6572 Soc . it's no charging or turn on but my flashtool is known as MTK USB device without battery but it is'nt jump to EMMC mode when I put in the battery its searching too and the windows write unknown USB device I try a lot of drivers. Have you any tip what can I do with this phone?
me i cant even load the clockwork mod my phone shows up like it s not even charging can t load the boot menu and also have the same problem i treied another version but always the same
I have a Bsnl penta ws704dx tablet and I was flashing it via pc and I make some mistake now the tablet is hard bricked(completely dead) I want to flash it now but my pc connecting and disconnecting it and in sp flash tool it shows error enable dram failed so what I do please help me
HARD BRICK - ERROR 4032 - ENABLE Dram Failed FIX finally found..... just follow this method 100% works fr all.... 1.download the SP Flash Tool V5.1352.01 2.select the scatter file from your original rom 3.go to "options" in the flash tool-options-connections-battery-select W/O battery 4.now go back and click on download and after that connect ur phone WITHOUT BATTERY to pc via usb cable and then just wait for few min. till the flashing over...... and after flashing disconnect phone from pc and then just start the phone1 and just ur done hope it helps
good morning . a few days ago to try to install the rom Lenovo S960 and followed all the steps but when you connect the cell reached 12% and I appeared an error window: BROM ERROR : S_FT_ENABLE_DRAM_FAIL(4032) Can you help me URGENT appreciate your cooperation
my phone ecoo 04 (2G) i think it's in meta mode no charge no sound when connect pc exept pressing volum + when i flashing rom with sp flash and pressing vol+ flash red line and stop at 100% :crying::crying::crying::crying:
+Juozas Čepulis Not working .. tried with another same phone's rom, original rom, created rom using mtk tools of another same phone ... none of this worked for me.
Guys, I'm not specialist, but you need reinstal preloader I think. Try to find preloader.bin file for your phone model ( full stock firmaware with scatter and other files is better ) and flash only preloader next. After that you can flash all other parametrs, but not botoloader. Found on Russian forum, sorry for my English
I also faced this same error. In my case I renamed the Firmware folder, as the error stated, it failed to find the correct folder. So that I renamed that folder back to Firmware and this time flashing worked.
hello everyone, I s7582 clone, I flashed with mt6572 sp flash tool is demmarré green color and fast fast he say that the flash is compléte. I downloaded four other flash but the same fault (error code brom 4032). someone who can help me
yah i gat a full soution on dat you have to look behindunder the battery and get the real name of your phone den u look for the ram e.g if CMX MODEL ONE den u look for that it will work cz dat error means u are installing a wrng fireware LOL
Hi,No worries, If you are using p55 novo then try to download v1037 version from androidmtk.com.You can see two files. One is for EB-90S53P55 v1027 and another v 1037. Download the second one in a fresh folder and move all previous files and setup to some other folder.A FRESH START AS YOU DID BEFORE.Patiently wait until OK with green indication.EXIT FROM SP FLASHDISCONNECT THE USB CABLE.Press the power button as usual. That's it. Finished.I SOLVED IT. IF YOU ARE USING ANOTHER PHONE, TRY DIFFERENT VERSIONS OF ROM. Note: SP FLASH TOOL IS ALSO INCLUDED IN THE DOWNLOADABLE FILE. Thanks.thread: Panasonic P55 novo Dead after firmware Upgrade Reply to Thread
jejeje a mi me funciono con un krono k5 q le instale una rom dandole formato y no volvio a prender ni a conectarme al sp flash tool y con esta cosa tan sencilla lo solucione
+Carlos Lara men fue algo raro el krono no me keria conectar mas yo espere hasta el otro dia al siguiente dia lo volvi a formatear pero con una rom diferente la primera ves voto error me tofo volverlo a formarrar luego lo flashie sin formatear normalmente y hay si revivio el problema edta esta en q uno lo formatra y q uno cambia el noot loader tiene q evitar siempre tokarles el boot loader y si ya lo apago le toka buscar otro software y reemplazarle el bott
@@kennethlopez9153 yo tengo un alcatel pixi 4 mini y le metí el software incorrecto con nck y no enciende nada, pantalla negra. Y lo conecto al pc, me lo conecta y desconecta a cada rato en segundos.. Me sale el mismo error del video
uninstall all the drivers and reinstall them again. download another recovery.img because most error occurs for using rom which are not intended for your phone.
press & hold volume up+ volume down + power key .then sp slash tool will show u media tek vcom driver do not lose keys untind flash start if it occour pls try to format it exept boot loader
these are common problems when flashing MT65xx based phones, ie : error 4008, 4xxx, 5xxx whatever those codes mean, no explanation after extensive search on google. once I managed to flash this one phone successfully, but I don't know exactly what I did. as long as I recall, I tried to delete the whole flashtool folders, re-extract them, let the phone cool down a bit and oh, try to press volume up, or down button (varies on devices) while connecting to USB, once the flashing progress bar starts, release the button. In the flashtool option, at the OPTIONS-->DA DOWNLOAD ALL-->, check WITHOUT BATTERY. and in the option, DA DOWNLOAD ALL--> SPEED, check DO NOT SWITCH SPEED. try flashing your phone without battery inserted, it works many times for me. NOTE : BEWARE, flashing your MTK65xx based phone, sometimes this tool tried to REMOVE YOUR PHONE's IMEI information, so take caution ! I haven't managed how to prevent IMEI removal when flashing those phones, because I'm not a developer. Hope this helps. esto me funciono
I have a solution, get/borrow an exact phone back it up using mtk droid tools and then restore the backup to your phone. It should work but only if you have someone you can borrow from.
ronald roxas I have posted a comment, I repost here, let me know if it worked for you 'Hello, after 3 days of trial I finally managed to flash my lenovo p780 (4GB) that was in this condition. More or less I did what is described in most forums, the differences between the successful attempt and the previous ones were the following. 1. I used SPflash tools v5 (the latest I found) 2. I used a ROM version (I think) close to the original one .My phone had a number 140421 at the lower part of the battery, I downloaded P780_ROW_S226_140919_Rooted_SPFlash_TWRP 3. I connected the phone which was turned off,after pressing 'download' at the SPFlash menu. After connecting it I did not press any buttons, just waited for about 30 sec 4. Compared to the video, I had chosen the Options/Download/DL DA all with checksum. 5. Before flashing I assosiated the .bin files of the downloaded ROM with the flash tools (right click on file, properties, opens with etc) 6. The whole process was done OFFLINE I hope this helps, good luck.'
لقد و جدت حل هذه المشكلة لهاتفي أرجو أن يعمل معكم hi i found the solution for my mtk phone iris is3 , the error message for me was because my phone lose the boot i meen lose the preloader so for that you need to 1/ download the SP_Flash_Tool_V3.1344 open the programme and chose the right preloader for your phone 2/ plug your battery in and press the volume up + buton 3/ flash your phone i hope that thats helped you
narm miloudimr لسلام عليكم ورحمة الله و بركاته أخي مشكلتك أنك فقدت البوت و لن يتعرف الكمبيوتر على الهاتف بتلك الطريقة .... هذا المشكل مر بي سابقا و هو بسبب تفليش البرلودر الخاطئ يفقد الهاتف تقسيم البارتيشنات و يفقد البوت المهم لن أطيل ستفلح الطريقة إن شاء الله تابع معي 1/ حمل النسخة SP_Flash_Tool_V3.1344 drive.google.com/file/d/0B9S_ERLSMngHVE9Qc25ObGU1UU0/edit 2/ حمل البرلودر www.mediafire.com/download/23652le5okyogar/IS3+Preloader+35xxxxxx+OLD.rar 3/ افتح برنامج فلاش تولزالنسخة (SP_Flash_Tool_V3.1344) تشغيل كمسؤول وقم باختيار ""البرلودر"" أعلاه 4/ و الان نقوم بوضع البطارية ثم الضغط على زر رفع الصوت + و ايصال الكابل USB (مع ابقاء الضغط على زر رفع الصوت) 5/ قم بتفليش البرلودر فقط فقط بالنسخة SP_Flash_Tool_V3.1344 6/ بعد تفليش البرلودر بالنسخة السابقة من البرنامج قم بتحميل النسخة الجديدة للبرنامج SP_Flash_Tool_v5.1352.01 fd5vsa.bn1303.livefilestore.com/y3my9rt71qfRhKlVnLjGBqdn3F4xrY50EeWFQ3VjdsTWj_udBP_NJPvMARkh25iIZ4sgHrCeM4E2_3UWRRLmD9T6R_LEMVUqFqQebP1C5RCwa8m8puPtdHvTB5XBkrEuM7AQdO1UptrN6uhbqPZtW7840lF7z3agqNrbjply_CVmps/SP_Flash_Tool_v5.1352.01.rar?download&psid=1 (إنسخ الرابط ) 7/ حمل الفيرموير في حال أنك لا تملك واحدا أو أنه معطوب www.mediafire.com/download/8u772w7t0vmevp5/MT6572__alps__I-S3__I-S3__4.2.2__ALPS.JB3.MP.V1.15.zip (تنبيه هاذ الفيرموير لا تأخذه كاملا يجب أن تحذف البرلودر الموجود به و تضع البرلودر الذي وضعت لك رابطه) 8/ قم بتفليش الهاتف بالنسخة الجديدة من البرنامج مع إلغاء علامة الصح من أمام البرلودر المرفق مع الفيرموير فلقد قمنا مسبفا بتفليش برلودر للهاتف ثم تابع عملية التفليش الى النهاية أرجو أن أكون قد أفدتكم أي إستفسار إليك حسابي facebook.com/hako.artist.9
Rishi Kesh Sharma I managed to revive my lenovo p780, I posted instructions in a comment. If you have not solved it try it and let me know if it worked.
I just solved this problem using this www.needrom.com/wp-content/uploads/2014/06/L800.zip I tried different roms and nothing worked for me except this rom. Try this hope it helps! My phone is hard bricked Lenovo A606 no lights at all no logo, no battery. Thanks i got an idea from your video.
If You have this problem with Lenovo p780 please install rom Lenovo_P780_S136_140306_Lang(mega.co.nz/#...M-es60lWi7ks8ZU) with SP Flash tool(www.needrom.com/download/rom-android-4-4-2/ read "Install rom")That's it.Mnie pomogło :D
+Dalla Style hey try this 1/ download the SP_Flash_Tool_V3.1344 open the programme and chose the right preloader for your phone 2/ plug your battery in and press the volume up + buton 3/ flash your phone i hope that thats helped you
more solutions. goo.gl/CSss9v
link is dead
hi! I have a hard bricked s4 clone with mt6572 Soc . it's no charging or turn on but my flashtool is known as MTK USB device without battery but it is'nt jump to EMMC mode when I put in the battery its searching too and the windows write unknown USB device I try a lot of drivers. Have you any tip what can I do with this phone?
me i cant even load the clockwork mod my phone shows up like it s not even charging can t load the boot menu and also have the same problem i treied another version but always the same
I have a Bsnl penta ws704dx tablet and I was flashing it via pc and I make some mistake now the tablet is hard bricked(completely dead) I want to flash it now but my pc connecting and disconnecting it and in sp flash tool it shows error enable dram failed so what I do please help me
i have this clone iPhone MTK6572 and I'm trying to flash a new rom onto it but I get this error 4032 problem. Please help
HARD BRICK - ERROR 4032 - ENABLE Dram Failed FIX finally found.....
just follow this method 100% works fr all....
1.download the SP Flash Tool V5.1352.01
2.select the scatter file from your original rom
3.go to "options" in the flash tool-options-connections-battery-select W/O battery
4.now go back and click on download and after that connect ur phone WITHOUT BATTERY to pc via usb cable and then just wait for few min. till the flashing over...... and after flashing disconnect phone from pc and then just start the phone1 and just ur done hope it helps
thank you. this work for me.
did not work for me. No other solution? please.
very good method
good morning . a few days ago to try to install the rom Lenovo S960 and followed all the steps but when you connect the cell reached 12% and I appeared an error window:
BROM ERROR : S_FT_ENABLE_DRAM_FAIL(4032)
Can you help me URGENT appreciate your cooperation
my phone ecoo 04 (2G)
i think it's in meta mode
no charge
no sound when connect pc exept pressing volum +
when i flashing rom with sp flash and pressing vol+
flash red line and stop at 100% :crying::crying::crying::crying:
WinD-DroiD only thing i can say is share this video as much as possible cause still now .. there's no solution
realice el proceso del driver del dispositivo pero cuando estab flasheando desconecte el dispositvo ahora no lo reconoce que solucion hay gracias
Quita la tapa trasera y desconecta la bateria, la vuelves a conectar y ya lo reconoce. saludos
No pude descargar la herramienta que el muestra en la pagina, vos si?
select without battery option in settings > connection then if your unsure about what to press just press vol up and down :)
If DRAM fails then you can't revive it. Sorry hard brick is unfixable. Soft-brick is fixable.
Hi! Tell me friend, did you find solution for ERRoR 4032? I spent a lot of time but havn't found a solution :(
Hi if you want to fix it use another preloader file my reason why it wasnt working is preloader file use file from another rom and its works
+Juozas Čepulis Not working .. tried with another same phone's rom, original rom, created rom using mtk tools of another same phone ... none of this worked for me.
excuse me. how to fix this error :" s_da_sdmmc_read_failed (3153)"
it's not work, i tried
Try to get stock firmware from site, also search web to get NVRAM file (usually .txt)
the solution you gave didn't work for me
Guys, I'm not specialist, but you need reinstal preloader I think.
Try to find preloader.bin file for your phone model ( full stock firmaware with scatter and other files is better ) and flash only preloader next.
After that you can flash all other parametrs, but not botoloader. Found on Russian forum, sorry for my English
hi try to format select
*auto format flash
*format whole flash
and try download true rom
Try keep charging about hour with power supply, not usb. Then try flash again.
I also faced this same error. In my case I renamed the Firmware folder, as the error stated, it failed to find the correct folder. So that I renamed that folder back to Firmware and this time flashing worked.
Can u teach me
Does this work on a oneplus one? My phone wont even show up on my computer? I have tried on 3 different ones...
Hah the opo is not a mtk device
hello!
i have a MTK6580 Sony C6. I have problem: ERROR 4032 HELLLPPPPP
hello everyone, I s7582 clone, I flashed with mt6572 sp flash tool is demmarré green color and fast fast he say that the flash is compléte. I downloaded four other flash but the same fault (error code brom 4032). someone who can help me
+suiiso ali keep sharing this video .. you'll get solutions for sure .
i have same problem before...but i change the sp flash tool version and its work...sp tool v3.1324.0.sn177 try this mine work maybe your to
+MALIK ALTAF I've used every versions of sp tools available on the internet so..
whats is the exact error...change your firmware version
+MALIK ALTAF u are awsome and exactly right..............
thanks warking
yah i gat a full soution on dat you have to look behindunder the battery and get the real name of your phone den u look for the ram e.g if CMX MODEL ONE den u look for that it will work cz dat error means u are installing a wrng fireware LOL
Hi,No worries, If you are using p55 novo then try to download v1037 version from androidmtk.com.You can see two files. One is for EB-90S53P55 v1027 and another v 1037.
Download the second one in a fresh folder and move all previous files and setup to some other folder.A FRESH START AS YOU DID BEFORE.Patiently wait until OK with green indication.EXIT FROM SP FLASHDISCONNECT THE USB CABLE.Press the power button as usual. That's it. Finished.I SOLVED IT.
IF YOU ARE USING ANOTHER PHONE, TRY DIFFERENT VERSIONS OF ROM.
Note: SP FLASH TOOL IS ALSO INCLUDED IN THE DOWNLOADABLE FILE.
Thanks.thread: Panasonic P55 novo Dead after firmware Upgrade Reply to Thread
ayuda con el error 5069 xq es cual es la solucion
it worked... even i faced same problem, wen i tried MOTA SIU LIKE it worked for me
my phone worked
tiene solucion esto enable dram fail 4032
Get preloader from here lenovo-forums.ru/index.php?app=core&module=attach§ion=attach&attach_id=14992 then copy & replace it in ur firmware.Flash!
THAT PRELOADER IS FOR ANY ANDROID OR ONLY FOR LEN...
always getting S_FT_ENABLE_DRAM_FAIL (4032) for micromax a102
preloader not correct from device.
flash another preloader.
ruslan mardanov upload a video or explain in detail text of how you= replaced the firmware.Flash! I'm clueless.
jejeje a mi me funciono con un krono k5 q le instale una rom dandole formato y no volvio a prender ni a conectarme al sp flash tool y con esta cosa tan sencilla lo solucione
+Kenneth Lopez Amiga eso mismo me pasó con un Alcatel One Touch 7040a, ¿Como le hiciste?
agradeceria mucho tu ayuda
+Carlos Lara men fue algo raro el krono no me keria conectar mas yo espere hasta el otro dia al siguiente dia lo volvi a formatear pero con una rom diferente la primera ves voto error me tofo volverlo a formarrar luego lo flashie sin formatear normalmente y hay si revivio el problema edta esta en q uno lo formatra y q uno cambia el noot loader tiene q evitar siempre tokarles el boot loader y si ya lo apago le toka buscar otro software y reemplazarle el bott
@@kennethlopez9153 yo tengo un alcatel pixi 4 mini y le metí el software incorrecto con nck y no enciende nada, pantalla negra. Y lo conecto al pc, me lo conecta y desconecta a cada rato en segundos.. Me sale el mismo error del video
remove and restart the process all over using a different recovery
+thechemicals :v
thanks but explain briefly .. i don't think recovery is the problem in this case .
uninstall all the drivers and reinstall them again. download another recovery.img because most error occurs for using rom which are not intended for your phone.
Pero Como Conecto El Celular Encendido O Apagado?
es apagado con el cable conectado nada mas al cel despues dale download y despues conectas el cel ya se intala solo
BROM ERROR: S_FT_ENABLE_DRAM_FAIL(4032)
Heelp plss :/
You have done the fix it?
Now im in same case bro, dram fail:(
pls try use ori cable and keep flash.
press & hold volume up+ volume down + power key .then sp slash tool will show u media tek vcom driver do not lose keys untind flash start if it occour pls try to format it exept boot loader
Bro mere phone mai non removable battery h plz help
hey bro i was facing the same problem but i fixed it u should download the latest sp flash tool and new rom for your xolo device.
you find solution?
these are common problems when flashing MT65xx based phones,
ie : error 4008, 4xxx, 5xxx whatever those codes mean, no explanation after extensive search on google.
once I managed to flash this one phone successfully, but I don't know exactly what I did.
as long as I recall, I tried to delete the whole flashtool folders, re-extract them, let the phone cool down a bit
and oh, try to press volume up, or down button (varies on devices) while connecting to USB, once the flashing progress bar starts, release the button.
In the flashtool option, at the OPTIONS-->DA DOWNLOAD ALL-->, check WITHOUT BATTERY.
and in the option, DA DOWNLOAD ALL--> SPEED, check DO NOT SWITCH SPEED.
try flashing your phone without battery inserted, it works many times for me.
NOTE : BEWARE, flashing your MTK65xx based phone, sometimes this tool tried to REMOVE YOUR PHONE's IMEI information, so take caution !
I haven't managed how to prevent IMEI removal when flashing those phones, because I'm not a developer.
Hope this helps.
esto me funciono
if u faced invalid imei then download mobile uncle tool app then insert imei
I have a solution, get/borrow an exact phone back it up using mtk droid tools and then restore the backup to your phone. It should work but only if you have someone you can borrow from.
Osomos Egroeg not worked for me.. same phone ..same rom.. no result!
This error is caused by trying to flash and incorrect ROM to the phone.
+nokiaman2002 i had a custom rom then my phone hard brick when i try to flash the stock rom and this error got me cant flash anything
i send it back in and got it fix
+Daniel N. i think that's the only solution
porfavor cuando lo soluciones sube un video gracias
There is no hope to solve this issue! :(
Michael Younes I solved it (maybe I was lucky) check my commend and good luck, I hope it helps...
Costis Pap how? help me plss :(
I posted a comment to this video, can you see it?
ronald roxas I have posted a comment, I repost here, let me know if it worked for you
'Hello, after 3 days of trial I finally managed to flash my lenovo p780
(4GB) that was in this condition. More or less I did what is described
in most forums, the differences between the successful attempt and the
previous ones were the following.
1. I used SPflash tools v5 (the latest I found)
2. I used a ROM version (I think) close to the original one .My phone
had a number 140421 at the lower part of the battery, I downloaded
P780_ROW_S226_140919_Rooted_SPFlash_TWRP
3. I connected the phone which was turned off,after pressing 'download'
at the SPFlash menu. After connecting it I did not press any buttons,
just waited for about 30 sec
4. Compared to the video, I had chosen the Options/Download/DL DA all
with checksum.
5. Before flashing I assosiated the .bin files of the downloaded ROM
with the flash tools (right click on file, properties, opens with etc)
6. The whole process was done OFFLINE
I hope this helps, good luck.'
Costis Pap Can you upload a video, like how you managed to solve the problem? Many will appreciate that. :)
hey man the link dont work...
check again the updated links may help you
Excuse Me TKS
لقد و جدت حل هذه المشكلة لهاتفي أرجو أن يعمل معكم
hi i found the solution for my mtk phone iris is3 , the error message for me was because my phone lose the boot i meen lose the preloader so for that you need to
1/ download the SP_Flash_Tool_V3.1344 open the programme and chose the right preloader for your phone
2/ plug your battery in and press the volume up + buton
3/ flash your phone
i hope that thats helped you
+Hako amin Really Thank you!!!!, you give me the solution!!!! Saludos desde MEXICO!
y're welcome "from ALGERIA"
hbb Hakim Rah 3andi mm Problem pls 3awenii :/
mon fb : fb.com/sazuki.hilal.94
مزال نفس المشكل وعندي نفس الهاتف الي عندك .
narm miloudimr
لسلام عليكم ورحمة الله و بركاته
أخي مشكلتك أنك فقدت البوت و لن يتعرف الكمبيوتر على الهاتف بتلك الطريقة ....
هذا المشكل مر بي سابقا و هو بسبب تفليش البرلودر الخاطئ يفقد الهاتف تقسيم البارتيشنات و يفقد البوت
المهم لن أطيل ستفلح الطريقة إن شاء الله
تابع معي
1/ حمل النسخة SP_Flash_Tool_V3.1344
drive.google.com/file/d/0B9S_ERLSMngHVE9Qc25ObGU1UU0/edit
2/ حمل البرلودر
www.mediafire.com/download/23652le5okyogar/IS3+Preloader+35xxxxxx+OLD.rar
3/ افتح برنامج فلاش تولزالنسخة
(SP_Flash_Tool_V3.1344)
تشغيل كمسؤول
وقم باختيار ""البرلودر"" أعلاه
4/ و الان نقوم بوضع البطارية ثم الضغط على زر رفع الصوت + و ايصال الكابل USB (مع ابقاء الضغط على زر رفع الصوت)
5/ قم بتفليش البرلودر فقط فقط بالنسخة
SP_Flash_Tool_V3.1344
6/ بعد تفليش البرلودر بالنسخة السابقة من البرنامج قم بتحميل النسخة الجديدة للبرنامج
SP_Flash_Tool_v5.1352.01
fd5vsa.bn1303.livefilestore.com/y3my9rt71qfRhKlVnLjGBqdn3F4xrY50EeWFQ3VjdsTWj_udBP_NJPvMARkh25iIZ4sgHrCeM4E2_3UWRRLmD9T6R_LEMVUqFqQebP1C5RCwa8m8puPtdHvTB5XBkrEuM7AQdO1UptrN6uhbqPZtW7840lF7z3agqNrbjply_CVmps/SP_Flash_Tool_v5.1352.01.rar?download&psid=1
(إنسخ الرابط )
7/ حمل الفيرموير في حال أنك لا تملك واحدا أو أنه معطوب
www.mediafire.com/download/8u772w7t0vmevp5/MT6572__alps__I-S3__I-S3__4.2.2__ALPS.JB3.MP.V1.15.zip
(تنبيه هاذ الفيرموير لا تأخذه كاملا يجب أن تحذف البرلودر الموجود به و تضع البرلودر الذي وضعت لك رابطه)
8/ قم بتفليش الهاتف بالنسخة الجديدة من البرنامج مع إلغاء علامة الصح من أمام البرلودر المرفق مع الفيرموير فلقد قمنا مسبفا بتفليش برلودر للهاتف ثم تابع عملية التفليش الى النهاية
أرجو أن أكون قد أفدتكم أي إستفسار إليك حسابي
facebook.com/hako.artist.9
my phone advan s5E, i try with another preloader, succes..
let me see build number? s2 ics 4.2.2 or jb 4.2.2
where is de solution
lol the song and the baby. gimme link please i needss itsss
khoya tana andi nfs had difo ila kin shi hal
+Khalid Khalid l9iti akhoya chi hal ?
good video sir, what will be next . my redmi note 3g has same error plz help
Rishi Kesh Sharma I managed to revive my lenovo p780, I posted instructions in a comment. If you have not solved it try it and let me know if it worked.
not work for me :( the same probleme
I simply change usb port and poblem was solved)
Plz tell me solution this error
j1 china soulation Hard bricked android : ERROR
CHANG THE ROM
SAME ERROR HERE WITHOUT BATTERY, PUT BATTERY, CONNECT USB CABLE AND PROBLEM SOLVED
enable dram fail 4032
Charge Batteries
preloader usb com
I just solved this problem using this www.needrom.com/wp-content/uploads/2014/06/L800.zip I tried different roms and nothing worked for me except this rom. Try this hope it helps! My phone is hard bricked Lenovo A606 no lights at all no logo, no battery. Thanks i got an idea from your video.
+Bonjovi Jasz Fojas That's great
If You have this problem with Lenovo p780 please install rom Lenovo_P780_S136_140306_Lang(mega.co.nz/#...M-es60lWi7ks8ZU) with SP Flash tool(www.needrom.com/download/rom-android-4-4-2/ read "Install rom")That's it.Mnie pomogło :D
Try a different version of sp flash tool.its work
+Dhananjay Verma i tried almost every version
Try any other pc.
Also you sure your mobile has no any hardware problem
i tried.. and no.. no hardware problem.
sir sam your youtub problem solition sir iphone clone a1661
plis is
error similar
error 2005
da fuq is these kids laughing sound effects?
lenovo u7 lock
Прогрей флеш-микросхему. heat flash chip.
+Aleksandr Ostapchuk It Will be Damaged
i have solucion
+Mayid Baza What is it?
+Dalla Style
hey try this
1/ download the SP_Flash_Tool_V3.1344 open the programme and chose the right preloader for your phone
2/ plug your battery in and press the volume up + buton
3/ flash your phone
i hope that thats helped you
mnin jit a fekroun
hhhhhhhhhhhhhhh you are algerian
mama ana ya wesmek
هههه الفكرون واش رياض
Sorry, but i really dislike babys, and obviously the laughts, but this is a very good tutorial!!!
thanks
your welcome!
Thank You Very Much , It Works
What a waste of time
Kahe le video dal hai
same my issue....
I Have same problem
Jaffa west my time
2b
bokachoda
monduhu yio
fack videos
taka ra ka bogok!!!
я здесь один русский?
it work for me, thank you
:-) :-) :-)