Nice, I’ve installed two of these in the last month. Toilet holes are hidden inside and no attachments. I use the tape as a reference both on the floor and the toilet, but I gently trace the template on the floor with pencil, and tilt the toilet in from the face. So far 2 no problem.
Installation is covered in lots of videos. This was simply attempting to show a technique for one person to install a skirted toilet in a confined space.
Another way to do it is making the cardboard template like you did and placing it in position then with hot glue, temporarily place a couple of 2 by 4 pieces on the perimeter to help guide the toilet in position!!! You’re welcome!!
According to the manufacturer video, you are supposed to use their template to use it as a guide so you drop it in the correct spot so the bolts go through the holes.
@@tomscorner9420 ive installed a couple of them and have had very poor experiences. Im happy for you that your experience has been good but I will not guarantee my work past 90 days with these. The plastic L bracket is a recipe for black water disaster in my opinion
@@twistedpudding the closet bolts attached to 2 nylon L brackets. The toilet screws in from the side to attach to the nylon bracket hence "holding it" to the floor. They stash the hardware in the toilet bowl. When you're pissed off because the screws won't reach, its not you. They are a quarter inch too short to engage. Go to your home center and get 4in stainless screws
![โรงเรียนห้ามรัก โดนจับได้ตาย...!! [เอิร์นไดเม่]](http://i.ytimg.com/vi/4u02Sbr556Q/mqdefault.jpg)
This is the second one for the basement bat. th-cam.com/users/postUgkxOuLt8IL_GxhhaK8DBuKEL-zV0UJVpWZn , works great
thanks for the tips, but I was looking forward to seeing the struggle so I can totally know how to get the job done :) good tips in the video though.
Really helpful advice, just what I was looking for. Thanks!
Nice, I’ve installed two of these in the last month. Toilet holes are hidden inside and no attachments. I use the tape as a reference both on the floor and the toilet, but I gently trace the template on the floor with pencil, and tilt the toilet in from the face. So far 2 no problem.
So, you don't actually show the installation?
Installation is covered in lots of videos. This was simply attempting to show a technique for one person to install a skirted toilet in a confined space.
Good advice, thanks!
Another way to do it is making the cardboard template like you did and placing it in position then with hot glue, temporarily place a couple of 2 by 4 pieces on the perimeter to help guide the toilet in position!!! You’re welcome!!
Maybe the title should be “Tips on how to prep before install” or something? Otherwise these are really good tips!
Good point. Thanks
Does this toilet have a flapper? Can you just goto home depot and get a replacement? Those go bad every few years
No flatter.
How does he tighten down the bolt?
How did you drop those blocks at the end?
According to the manufacturer video, you are supposed to use their template to use it as a guide so you drop it in the correct spot so the bolts go through the holes.
This toilet is trash!! Had to smash it to remove it! There is no access at all! Stay away from the headache!
How did you tighten the bolts once the toilet was on the floor?
As I recall, the toilet came with a wrench. I had to reach around and tighten the bolt.
@@tomscorner9420 Ah ok, I just wanted to know if there is any easier way. Thanks!
@@tomscorner9420 was it a special type of wrench?
@Lineve Ritchie As I recall, one end went on the nut and the other end was like a big key so that you could twist with one hand while reaching around.
Painter's tape tip was most helpful
These toilets are GARBAGE and an absolute nightmare to install. Don't get one!
Actually, the toilet is great. I created the video to show an approach to installing the toilet in a confined space.
@@tomscorner9420 ive installed a couple of them and have had very poor experiences. Im happy for you that your experience has been good but I will not guarantee my work past 90 days with these. The plastic L bracket is a recipe for black water disaster in my opinion
@@twistedpudding the closet bolts attached to 2 nylon L brackets. The toilet screws in from the side to attach to the nylon bracket hence "holding it" to the floor. They stash the hardware in the toilet bowl. When you're pissed off because the screws won't reach, its not you. They are a quarter inch too short to engage. Go to your home center and get 4in stainless screws
@@twistedpudding they must have changed their design. Im glad to hear they fasten to porcelain now!
Black lines matter !!!