Really wish u would start moving the buttons down just a little but on yiur back button kits the k1 and 3 buttons should be below where k2 and 4 are now they are to high up the controller makes it uncomfortable to press same for the rise 4 ps4 kit
Hello, i had to remove the FPC1 ribbon cable after solder it on initially, after resoldering, the controller doesnt seem to turn on, any idea if i damaged the controller when soldering?
Hi, there is a company that makes same back buttons as you they are caleed Charm Focus PS5 kit, can you please do paddles with a style like that? The current ones are very uncomfortable to use 4 paddles please makes new design that can be added to our controller without swapping everything
On gaming i can use skill when i click button a+x+y simultaneously My question is can i restore button(a+x+y) to the k2? like i can use skill when i click k2 button Is it possible? Sorry for my english skill and thanks for reading
So tp 35 and tp 19 will not solder to the motherboard at all. I also tried putting some solder on just those points without the fpc. Have I ruined the motherboard? Any solutions to this issue?
Hello,I'm thinking a lot about buying the kit, but I already have the click mouse kit installed on the controller, my question is could I remove the wires from the click kit and install them on the board again without any problem?
@@ExtremeRate if someone’s buying a clicky kit they don’t care about medium or long pulls, if it bothers ye so much just find a happy medium like your Xbox clicky grips (clicky and long pull) 😒
I wish you would make the interchangeable thumbsticks with better quality rubber caps similar to the ps2 and ps3 controllers and have them the same height as all the sticks, not just those higher than average You could sell 2 for 20€ and id buy 2 instantly. Im tired of buying DualShock 3 controllers to disassemble the thumbsticks and then leave them in hot water to then remove the rubber caps. Because the quality of the original sony rubber caps are just on another level. Im using the eXtreme Rate xbox style interchangeable thumbsticks with the dualshock 3 rubber cap on top on my dualsense (the Xbox style thumbsticks are the only sticks with nornal height. I HATE those style of sticks, be it xbox controllers, dualsense or dualshock 4) Hell, if you could sell those quality rubber caps to put on any thumbstick from the get go, it would be amazing. But they gotta be high quality, tight and have some weight.
That playstation paddle kit so much better then both the xbox button variants
will you guys be making a paddle kit for the xbox S/X controller
Are we going to get a clicky kit for d-pad on Xbox?
Really wish u would start moving the buttons down just a little but on yiur back button kits the k1 and 3 buttons should be below where k2 and 4 are now they are to high up the controller makes it uncomfortable to press same for the rise 4 ps4 kit
When are the PS5 back "buttons" coming out ? Thanks
We are working on it already, please stay tuned!
Would yous ever release any pc kbm related attachments ? A Keyboard joystick to replace wasd would be godsend 😮
that's a cool idea
Hello, i had to remove the FPC1 ribbon cable after solder it on initially, after resoldering, the controller doesnt seem to turn on, any idea if i damaged the controller when soldering?
How would I install it if I don’t have a solder tool ?? Is there another way or who could I reach out to to help me set this up for me
Hi, there is a company that makes same back buttons as you they are caleed Charm Focus PS5 kit, can you please do paddles with a style like that? The current ones are very uncomfortable to use 4 paddles
please makes new design that can be added to our controller without swapping everything
Hi, we are working on our new PS5 back buttons solution, I think it will meet your expectation, please stay tuned
Do you plan on releasing back shells for the xbox elite series 2 controller? My stock shell has been cracking and there are no decent replacements
Yes we are working on the non-rubber grips version
Is it possible for you to make a plug in back button attachment
YES!
@@ExtremeRateIt would be amazing if you could release one i would definitely purchase and share
This seems doable...Dont you need flux or something?
On gaming i can use skill when i click button a+x+y simultaneously
My question is can i restore button(a+x+y) to the k2?
like i can use skill when i click k2 button
Is it possible?
Sorry for my english skill and thanks for reading
I dont believe so
No, only single button can be mapped to one back button
So tp 35 and tp 19 will not solder to the motherboard at all. I also tried putting some solder on just those points without the fpc. Have I ruined the motherboard? Any solutions to this issue?
Hello,I'm thinking a lot about buying the kit, but I already have the click mouse kit installed on the controller, my question is could I remove the wires from the click kit and install them on the board again without any problem?
You should just be able to plug in the flex cable. Shouldn't be a need to remove any wires
Mouse click triggers for Dualsense Edge !!!
We want to keep the long and medium trips when the shortest is clicky, so it's a difficult job!
@@ExtremeRate if someone’s buying a clicky kit they don’t care about medium or long pulls, if it bothers ye so much just find a happy medium like your Xbox clicky grips (clicky and long pull) 😒
I wish you would make the interchangeable thumbsticks with better quality rubber caps similar to the ps2 and ps3 controllers and have them the same height as all the sticks, not just those higher than average
You could sell 2 for 20€ and id buy 2 instantly. Im tired of buying DualShock 3 controllers to disassemble the thumbsticks and then leave them in hot water to then remove the rubber caps.
Because the quality of the original sony rubber caps are just on another level. Im using the eXtreme Rate xbox style interchangeable thumbsticks with the dualshock 3 rubber cap on top on my dualsense (the Xbox style thumbsticks are the only sticks with nornal height. I HATE those style of sticks, be it xbox controllers, dualsense or dualshock 4)
Hell, if you could sell those quality rubber caps to put on any thumbstick from the get go, it would be amazing. But they gotta be high quality, tight and have some weight.
what if i dont have a iron thing
Buy one