The slit should be placed on the downward slope of the roof as rain will flow down the slope . You have the slit perpendicular to the slope of the roof which over time will allow water to leak into and under the slit .
2 questions: 1. Doesn't the Karnak eventually harden & become detached from the metal, same as the membrane? 2. It's been a year....is this still waterproof? Thanks for the great video!
How can you say that he just told you in this video there is a proper way to do it but this is the way he does it. So he just admit that his way is not the proper way to do it.
Spot on that pal,and yes that’s the best proper way,torching to steel 👍👍👍👍👍👍I make torch on felt,,underlay,,cap sheets,shed felts and vented membranes for SOPREMA////chesterfelt at chesterfield uk,,,best torch on felt ever👍👍👍👍👍👍👍
Very interesting! Do you know what kind of shingles were on the rest of the roof? It was a very unusual mix of profiles (square edge and dog ear) and it looked like some were loose, sort of curling at their edges. I'm wondering if it was a synthetic/composite product.
Some professional he just said in this video there is a proper way to do it but this is his way. He just admitted that he isn't doing it the proper way.
thanks for the videos , I am from new mexico . We dont have Karnak 81 here . where can we buy it ?, i would like to fix my mobile home roofing . thanks.
Firstly 👍 to the lady always helping. Did you used 2 different Peel and stick membranes or is different the other one you used flame to heat the membrane?
You finally said something right. When you said the proper way do this and then changed you're mind and said you're way to do this. So you admit there is a right way to do it but you won't or don't know how. A real roofer knows that to torch on metal you need to put primer first and a real roofer know that you always start your base with a half sheet cut down the middle so you don't end up with base and cap hitting lap on lap anything less than 12 inches is not expected. If the roof has drains you start at the drain with your base half and half in the middle of the drain so when you start with your cap the cap is full over the drain. You said the other guys patches didn't stick to the roof but instead of removing it you put your base right over it. So every time you pass over it you base isn't stuck either. What a hack job. If you're putting down a new roof over the old one do it right or let someone that knows what they're doing do it instead. Trying to blame other roofer saying they did a bad job no they were payed to a temporary patch job because they probably gave the real price to do the proper job and the owners of the place thought it was to high. So you said you would do it cheaper but didn't tell them it was just price that way cheap but you're work to who the hell puts down plastic cement under torch down.
@Peter Alexander Mielke I do teach a torching course out here in Canada and if the roof Dr. Was to take it he would never pass with all the short cut he does and the mess he makes. He would never be licensed in this country.
The valley should have an underlayment with a sticky backing laid in the valley lengthwise . You then put a 36 inch wide section of metal roof from the edge to the hip of the roof . Make sure you buy the metal roofing section that has a ridge on it so that water will hit that ridge and flow down to the roof edge and not flow over flat flashing and get under the shingles . Do not use flat flashing on the roof valley . Only use a roof flashing 36 inch wide with a hip on it . ( the metal roof section I am speaking about has baked enamel paint on it ) . When the roofers or you put the perpendicular sticky backing underlayment to cover the flashing 1 to 3 inches from the hip of the valley flashing . Since the underlayment is 36 inches wide , nail the flashing 1 inch in from the edge of the flashing as the roof valley section is also 36 inches wide . Then lay your perpendicular sticky back underlayment that covers the whole roof over the nails in the flashing . Remember to not cover the hip of the flashing with the underlayment .
Continue a full roll of membrane into and up the wall about 4-6" Cut a separate piece of membrane to cover the parapet and extend down the wall and back onto the flat roof. Heat the membrane enough to get a bleedout of spooge no less than 1/4" and no more than 1" Take measurements and order 10' lengths of metal "coping" of a very thick gauge to cap the parapit
Please, you make me nervous walking around so close to the edge. There are such things as micro blackouts. Please, tell your wife to at least wrap you in ten layers of bubble wrap. BEST videos!
It is to flat. You need more pitch for Peel and Stick Cap Sheet. Peel and Stick Cap Sheet will only work when you have positive water flow to one direction. And then you still have to torch weld the end laps.
I normally would use John Mansfield's Dynagrip base. But I could not find any other than that of Liberty made by GAF. This base is meant for the Liberty System. It still worked for me in this case.
@@xxdrloveleyxx5185 because he torched over it, probably not... he got the temp of the peel and stick so hot, it probably relaxed and sank all the way down down the roof everywhere.... if this was a cold roof, then you're right, it would fail miserably as the bottom layer... dude is doing his own thing... clearly
I would have cleaned the roof off thoroughly and applied a 5 gallon bucket of asphalt primer to the entire roof area before any base sheet was applied to the existing roof.
I like you're vlogs but one thing I like to ask you... Do you love the wife? Or you're self? Because safety a big issue here if you fall from that roof it is finisht
Do not listen to a single thing this man tells you in his videos. I have over 40 years in the commercial roofing industry. I have been hired as an expert witness on lawsuit failures. I currently work for a highly respected engineering/consulting firm that writes specifications for replacement. We perform forensic investigations on failures. This person is so far from showing you industry construction standards that I am compelled to express my knowledge. Please you can email me and I will tell you how to repair/replace your roof system. This guy is what is wrong with misinformed contractors.
I agree I’ve been a commercial flat roofer for 23 years a foreman for 20 years he’s the reason customers says all flat roofs leak all flat roofs don’t leak it’s the people who install them that make um leak yours is best comment on this video thumb’s up to roofers who take pride and do it write 👍👍👍
The slit should be placed on the downward slope of the roof as rain will flow down the slope . You have the slit perpendicular to the slope of the roof which over time will allow water to leak into and under the slit .
i had the flat roof over my two bedrooms and a bath done this way in mid 80's here in n. idaho. never have a problem with it. still going strong 🙂
You are the best I love your work.
Very good master, i will do the same on dripedge in my next job 👍
Thank you for your video!! Very helpful!
They also did sloppy flashing. Unbelievable..... Thank you for sharing.
2 questions: 1. Doesn't the Karnak eventually harden & become detached from the metal, same as the membrane? 2. It's been a year....is this still waterproof? Thanks for the great video!
You are a great roofer. Know it all type are so quick with the negative comments
thanks
How can you say that he just told you in this video there is a proper way to do it but this is the way he does it. So he just admit that his way is not the proper way to do it.
Karnak… I put that ish on everything haha great video
Thank you so much for the information
Spot on that pal,and yes that’s the best proper way,torching to steel 👍👍👍👍👍👍I make torch on felt,,underlay,,cap sheets,shed felts and vented membranes for SOPREMA////chesterfelt at chesterfield uk,,,best torch on felt ever👍👍👍👍👍👍👍
U nail your edge medal zig zag ever Two inches.
Very interesting! Do you know what kind of shingles were on the rest of the roof? It was a very unusual mix of profiles (square edge and dog ear) and it looked like some were loose, sort of curling at their edges. I'm wondering if it was a synthetic/composite product.
Thanks for allowing us to see how professional do it .tow thumbs up 👍 can you put liberty pill and stick straight to OSB
Some professional he just said in this video there is a proper way to do it but this is his way. He just admitted that he isn't doing it the proper way.
Excellent
thanks for the videos , I am from new mexico . We dont have Karnak 81 here . where can we buy it ?, i would like to fix my mobile home roofing . thanks.
Love your work. Proper clean work. Thanks for the knowledge.
You are welcome. I am glad you enjoyed it.
thanks for the great information
Thanks Amir, have a nice day
14th Nov 2024. Would this also work for a concrete roof in Belize in Central America. I'm having major issues with one.
Amazing job!
Thank you!
nice job corazon
Thanks
Firstly 👍 to the lady always helping. Did you used 2 different Peel and stick membranes or is different the other one you used flame to heat the membrane?
It's not funny Ricky tske the new guy and show him how to do that
Nevedmind I qu😅
Nevermind3d4😊ile heh
Is black mastic the same as Karnak?
Guau, guau que gran reparación
mucho mucho gracias mi amor
Sweetheart nice nice job thank you for you time making videos to you us another way to doit ♥️🥰
You are so welcome
Yay to the lady! Girl power! 😊
Buen trabajo 👍
hola muchas gracias mija por tu timpo te te quiero mucho mija cuidate by
You spray your medal with asphalt primer.
You finally said something right. When you said the proper way do this and then changed you're mind and said you're way to do this. So you admit there is a right way to do it but you won't or don't know how. A real roofer knows that to torch on metal you need to put primer first and a real roofer know that you always start your base with a half sheet cut down the middle so you don't end up with base and cap hitting lap on lap anything less than 12 inches is not expected. If the roof has drains you start at the drain with your base half and half in the middle of the drain so when you start with your cap the cap is full over the drain. You said the other guys patches didn't stick to the roof but instead of removing it you put your base right over it. So every time you pass over it you base isn't stuck either. What a hack job. If you're putting down a new roof over the old one do it right or let someone that knows what they're doing do it instead. Trying to blame other roofer saying they did a bad job no they were payed to a temporary patch job because they probably gave the real price to do the proper job and the owners of the place thought it was to high. So you said you would do it cheaper but didn't tell them it was just price that way cheap but you're work to who the hell puts down plastic cement under torch down.
@Peter Alexander Mielke I do teach a torching course out here in Canada and if the roof Dr. Was to take it he would never pass with all the short cut he does and the mess he makes. He would never be licensed in this country.
I did commercial roofing for 38 years , this guy is a hack!
The valley should have an underlayment with a sticky backing laid in the valley lengthwise . You then put a 36 inch wide section of metal roof from the edge to the hip of the roof . Make sure you buy the metal roofing section that has a ridge on it so that water will hit that ridge and flow down to the roof edge and not flow over flat flashing and get under the shingles . Do not use flat flashing on the roof valley . Only use a roof flashing 36 inch wide with a hip on it . ( the metal roof section I am speaking about has baked
enamel paint on it ) .
When the roofers or you put the perpendicular sticky backing underlayment to cover the flashing 1
to 3 inches from the hip of the valley flashing .
Since the underlayment is 36 inches wide , nail the flashing 1 inch in from the edge of the flashing as the roof valley section is also 36 inches wide . Then lay your perpendicular sticky back underlayment that covers the whole roof over the nails in the flashing . Remember to not cover the hip of the flashing with the underlayment .
Excelente trabajo
mucho gracias senorita
What make Peel and stick are you using in your videos
What does it cost to go over a metal roof.
What is the best way to a torch down on new concrete block parapitt ?
The proper way is not doing it the way he does it.
Continue a full roll of membrane into and up the wall about 4-6"
Cut a separate piece of membrane to cover the parapet and extend down the wall and back onto the flat roof.
Heat the membrane enough to get a bleedout of spooge no less than 1/4" and no more than 1"
Take measurements and order 10' lengths of metal "coping" of a very thick gauge to cap the parapit
Also, it is highly recommended to cover any masonry surfaces with an asphalt primer prior to adhering the torch membrane to the block parapet
Please, you make me nervous walking around so close to the edge. There are such things as micro blackouts. Please, tell your wife to at least wrap you in ten layers of bubble wrap. BEST videos!
Why don't you use peel and stick cap sheet?
It is to flat. You need more pitch for Peel and Stick Cap Sheet. Peel and Stick Cap Sheet will only work when you have positive water flow to one direction. And then you still have to torch weld the end laps.
What brand of self stick base sheet do you use?
I normally would use John Mansfield's Dynagrip base. But I could not find any other than that of Liberty made by GAF. This base is meant for the Liberty System. It still worked for me in this case.
self stick doesnt mean its self stick. it has to be glued and them pressure rolled. that will fail in time
@@xxdrloveleyxx5185 because he torched over it, probably not... he got the temp of the peel and stick so hot, it probably relaxed and sank all the way down down the roof everywhere.... if this was a cold roof, then you're right, it would fail miserably as the bottom layer...
dude is doing his own thing... clearly
I would have cleaned the roof off thoroughly and applied a 5 gallon bucket of asphalt primer to the entire roof area before any base sheet was applied to the existing roof.
I like you're vlogs but one thing I like to ask you... Do you love the wife? Or you're self? Because safety a big issue here if you fall from that roof it is finisht
Cowboy 🤠
Ahhh roofing in a can a lost art...hahaha
Isn’t that roll roofing not rubber roof?
Burning the karnack adhesive isn't good, either. It's a cold ply adhesive
Wire wheeling a lead roof with no respirator. My god.
Please helpvn2
Why do you call torched applied rubber it is not rubber in any way
Do not listen to a single thing this man tells you in his videos. I have over 40 years in the commercial roofing industry. I have been hired as an expert witness on lawsuit failures. I currently work for a highly respected engineering/consulting firm that writes specifications for replacement. We perform forensic investigations on failures. This person is so far from showing you industry construction standards that I am compelled to express my knowledge.
Please you can email me and I will tell you how to repair/replace your roof system.
This guy is what is wrong with misinformed contractors.
I agree I’ve been a commercial flat roofer for 23 years a foreman for 20 years he’s the reason customers says all flat roofs leak all flat roofs don’t leak it’s the people who install them that make um leak yours is best comment on this video thumb’s up to roofers who take pride and do it write 👍👍👍
Yeah take pride on screwing people out their money 👍😂
Just comment how much y’all charge people 🫡
Load of bollocks mate neither way is right do it properly
What was the quote for this? I’m in a different country but you’re my bible now
Don't listen to a word this guy says.
Bro breathes in cancer for a living :( start wearing a mask please