It might have been the most scary task in our van conversion yet! Would you cut the whole in the roof of your car yourself or take it to the workshop / mechanic?
We try to share as much as we can but on the other hand we're learning along the way and don't want to misguide you in any way. Glad it helped though! We can assure you that it all still works well electrically and didn't leak a drop!
Great video, thanks! How did you screw the top part in place through the metal? Did you drill holes first for the 20 screws? How did you align them properly?
At 18:06 if I do so my wires will come out!!! Is there a trick to it? I press down the button, push in the cable until the end and release the button. But it barely holds the cable. I'm using 2.5mm ones but the small ones won't hold either. Do i need to press something extra?
I don’t think we can help you with this one unfortunately… it was tricky to get them there but when they came in they stayed. Can’t say for sure if there were any other thing to do like screw or something. I don’t remember that well… But I remember we used 2x0,75 copper wire.
Same problem here! They won't hold inside. The newer model have a screw to tighten the cable down so they did some improvement. Could you fix yours Annabel Owen?
A już chciałam pytać czy Falkora wypożyczyliście dla atencji (i że jako jedynie jesteście w stanie utrwalić go na filmie/zdjęciu wyłącznie jako słodziaka), ale potem rozpoznałam działeczkę xD
It might have been the most scary task in our van conversion yet! Would you cut the whole in the roof of your car yourself or take it to the workshop / mechanic?
Thanks for showin the electrical part, only you guys showed it, ❤
We try to share as much as we can but on the other hand we're learning along the way and don't want to misguide you in any way. Glad it helped though! We can assure you that it all still works well electrically and didn't leak a drop!
Next step done! Great Job! ❤️
Thanks Piotrek! It was a scary step to be honest :D
Great video, thanks!
How did you screw the top part in place through the metal? Did you drill holes first for the 20 screws? How did you align them properly?
Buen trabajo 👍.
Thank you! We did our best ;)
At 18:06 if I do so my wires will come out!!! Is there a trick to it? I press down the button, push in the cable until the end and release the button. But it barely holds the cable. I'm using 2.5mm ones but the small ones won't hold either. Do i need to press something extra?
I don’t think we can help you with this one unfortunately… it was tricky to get them there but when they came in they stayed. Can’t say for sure if there were any other thing to do like screw or something. I don’t remember that well… But I remember we used 2x0,75 copper wire.
How did you actually get the wires in the terminals ours just won’t go in?
Which terminals?
Same problem here! They won't hold inside. The newer model have a screw to tighten the cable down so they did some improvement. Could you fix yours Annabel Owen?
We hope Annabel will have the solution! :)
A już chciałam pytać czy Falkora wypożyczyliście dla atencji (i że jako jedynie jesteście w stanie utrwalić go na filmie/zdjęciu wyłącznie jako słodziaka), ale potem rozpoznałam działeczkę xD
Haha tak jest! I pomocną dłoń Kamila ;) ale przecież Falkor jest tylko słodziakiem! I nie mielibyśmy nic przeciwko wypożyczaniu go ;>
Asystent
najlepszy! czasem udaje nam się go wypożyczyć i zatrudnić jako aktora :D