How to Prepare Tube Ends (Fittings) | Tech Tips | Swagelok [2020]

[@NOBOX7]

you guys have top notch product , flare fittings leak 5% of the time on steam systems, this is messing with my process control switches , i regret not using this system . the beauty is in the fact it seals the outside of the tube , not the inside wich is often seem welded resulting in leaks

[@frankieroman78]

Any recommendations on putting a new fitting on a heat treated copper tubing?

[@swagelok]

Hello Frankie, your local sales and service center will be able to answer your question. You can find their contact information here: products.swagelok.com/locator

[@Engloid]

Many instrument techs will lay out all the marks on the tube before making the first bend, using setback, and advance marks. Where can I find good information on that?

[@swagelok]

Hi Engloid, Your local sales and service center will be able to answer your questions thoroughly. Their contact information can be found here: products.swagelok.com/en/locator. Some additional information on proper tube preparation can be found here: www.swagelok.com/en/blog/proper-tube-preparation, and additional information on tube bending is located here www.swagelok.com/en/blog/bent-tube-equipment-training

[@maqsoodahmad-ts9by]

Nice video

[@jeremiasteodoro2646]

Tá no.brasil e não tem legenda brasileira porque?????????

[@A.R_SH]

How to Prepare Tube Ends