@mr.skellyboy9700 Alarm Clocks and Phone Alarm clocks are over rated. Get a spectralert advance in your apartment and have it randomly go to continuous. That should get you up and running. 🤣😭
It could he either of those if it was an apartment building for college undergrads. If it’s a “normal” apartment complex, then I wouldn’t think so. Maybe a faulty panel or someone broiling/baking.
@@ABCEasyas-- college students sometimes stay in regular apartment complexes lol. And it also depends on the neighborhood. The place my dad stayed at since he didn’t their maintenance his rent was free the fire alarms got pulled at all hours of the night etc because the (cough cough) tenants were from what would be referred to as ghettos nowadays
@@geoffg8840 ground fault circuit interrupter. Basically, it's a safety feature that shuts off outlets or appliances if the electrical current going back in is less than the current going out, in other words, if electrical current is going somewhere it's not supposed to
If there were System Sensor L-Series devices during the glitched sync they wouldn't do continuous because these SpectrAlert Advances are the ones where they startup on continuous then go into code-3
Because there are numerous false alarms, this can be tricky because people stop evacuating. If there is a true emergency, these are the buildings that will be in the news announcing the number of fatalities.
On the 2nd day of high school my freshman year (sophomore now) there was a major storm and all the fire alarms started going off for some reason and there was no power to the school for a whole hour and it was kinda weird. So aparently the area I was in was in code 3 normally but I heard in some areas in the PAC (Performing Arts Center) it was on continuous. (Btw the system is notifier but idk what system and the devices are all Eaton Wheelock exceeder xenon's) Idk why this happened but seeing this reminds me of that incident. (btw it would go off for like 2 minutes then off then on again and this would repeat for a while before the school just did an early release because of the weather and alarms)
I don't know why your not evacuating from what I learned if the fire alarm goes off for any reason then a test witch most apartments will notify you of a test you should evaluate right away
Well they normally don't notify us of tests here, reason we didn't evacuate was because somebody activated it which is a common problem around here. Fire Department didn't show up, It was most likely a prankster doing crap they shouldn't be doing.
I guess the alarms are set on "Continuous Coded" which is an actual code on these alarms. With that code you can set the panel on any codes you want the alarms to sound. And it's safer for the alarms.
@@bjthedjdutchdude1992 Well actually the panel is set to do Code 3. Not sure what made it switch to continuous. This was the first time it ever switched to continuous. Previous alarms it never did that. Glad I decided to record when I did
6:44 Honestly, though. This had me. LOL
LOL It was so funny 🤣
@mr.skellyboy9700 Alarm Clocks and Phone Alarm clocks are over rated. Get a spectralert advance in your apartment and have it randomly go to continuous. That should get you up and running. 🤣😭
Given it's an apartment building I'd say someone either burnt food, was drunk out of his or her mind and pulled it, smoked weed, or some other stuff.
Probably, I wouldn't be surprised
It could he either of those if it was an apartment building for college undergrads. If it’s a “normal” apartment complex, then I wouldn’t think so. Maybe a faulty panel or someone broiling/baking.
@@ABCEasyas-- Its just a normal Apartment
@@ABCEasyas-- college students sometimes stay in regular apartment complexes lol. And it also depends on the neighborhood. The place my dad stayed at since he didn’t their maintenance his rent was free the fire alarms got pulled at all hours of the night etc because the (cough cough) tenants were from what would be referred to as ghettos nowadays
If i had to be honest, i think the fire alarms were drunk
The plugs popping was probably the GFCI triggering. As for the glitchy coding, it’s gotta be a problem with the sync programming in the panel.
Yeah! I'm pretty sure it was the GFCI. This panel here does have a lot of problems with it
But than how are the pulses on the main advance of the video going slower than the other advances?
@@bjthedjdutchdude1992 I was wondering that too. It was weird it was doing that
@@GhostlyPlayz94Whats GFCI?
@@geoffg8840 ground fault circuit interrupter. Basically, it's a safety feature that shuts off outlets or appliances if the electrical current going back in is less than the current going out, in other words, if electrical current is going somewhere it's not supposed to
I'd guess either a sync malfunction, stuck relay, or another issue in the panel
If there were System Sensor L-Series devices during the glitched sync they wouldn't do continuous because these SpectrAlert Advances are the ones where they startup on continuous then go into code-3
Because there are numerous false alarms, this can be tricky because people stop evacuating. If there is a true emergency, these are the buildings that will be in the news announcing the number of fatalities.
I'm gonna guess the sync protocol won't work and will need to be replaced to get the sync working again.
Crapped out sync programming in the panel probably caused it to go continuous. As for the GFCI, I have no clue.
Even the captions think it’s music
LOL
Yep, I saw that too. It also included the word “foreign”
6:44 👏🏻 🔥 🚨
6:44 uhhh… guys?
Sounds like theyre being coded from the panel, what is the panek anyway?
I believe its a Notifier panel, or it maybe a system Sensor. Not sure, I will have to check when I go by it again
@FireTech7
UPDATE to my previous reply, I was able to see what panel it is and its a Gamewell Panel.
@@GhostlyPlayz94 e3, s3?
@@FireTech7 Not sure, I know its an older panel though
On the 2nd day of high school my freshman year (sophomore now) there was a major storm and all the fire alarms started going off for some reason and there was no power to the school for a whole hour and it was kinda weird. So aparently the area I was in was in code 3 normally but I heard in some areas in the PAC (Performing Arts Center) it was on continuous.
(Btw the system is notifier but idk what system and the devices are all Eaton Wheelock exceeder xenon's)
Idk why this happened but seeing this reminds me of that incident.
(btw it would go off for like 2 minutes then off then on again and this would repeat for a while before the school just did an early release because of the weather and alarms)
Oh wow! That's pretty interesting if you ask me. Its kinda cool how storms Can trigger the fire system to activate
6:30 So funny I use my 3 party light with sound and it sound like this 🤣🤣🤣🤣🤣🤣
LOL
100% it was ALIENS. 👽
LOL it probably was
I don't know why your not evacuating from what I learned if the fire alarm goes off for any reason then a test witch most apartments will notify you of a test you should evaluate right away
Well they normally don't notify us of tests here, reason we didn't evacuate was because somebody activated it which is a common problem around here. Fire Department didn't show up, It was most likely a prankster doing crap they shouldn't be doing.
Ok thanks for letting me know as long as you safe that's all that matters
@@GhostlyPlayz94 ok thanks for letting me know as long as you safe that's all that matters
@@jaredshep4030 You're welcome, and yes I'm safe :)
Could be a faulty NAC.
Definitely could be
6:46 "WHAT?!"
For The Code 3 Then Continue then code 3 for that i think it turned on the bell mode
Probably did
What happened there?
Not sure what the hell happened. But it was funny
Code 3 then continuous 😂
LOL it was funny as hell when it did that
@@GhostlyPlayz94 I would’ve been laughing too, LMAO
@@abandoned2007 LOL
I guess the alarms are set on "Continuous Coded" which is an actual code on these alarms. With that code you can set the panel on any codes you want the alarms to sound. And it's safer for the alarms.
@@bjthedjdutchdude1992 Well actually the panel is set to do Code 3. Not sure what made it switch to continuous. This was the first time it ever switched to continuous. Previous alarms it never did that. Glad I decided to record when I did
E E E 3