@@EthanHervigthanks for the reply What mods/ upgrade do you recommend she runs good but of course I’m going to throw in new clutch and reeds and I just can’t seem to find an after market exhaust for the pw80 Fmf seems to have discontinued the set up for the pw80 😢
Ethan Hervig I hear ya. Mikuni OEM is the way to go. The fuel leaking is cause the floats not closing the fuel inlet to the bowl. It’s over flowing out. My sons did the same thing. Good luck bud. Nice channel. Good to see.
In my country they use the pw80 machine at a drag race or street race and that thing is a beast if you tune it right . The pw80 machine is similar to the yamha mate v50 or v80 machine. If you look it up its the same but only the pw80 machine is way faster dan the normal japan yamaha mate v50 or v80 machine
I have one like it but it doesn't turn on. I already cleaned the gas tank carburetor. change filter inside tank and it won't turn on. Spark plug wire has spark. what could be the problem?
Could be a mixture of things, the idle might be too high, the carb might not be tuned right, the bike may have too low of compression, make sure fuel is flowing and getting to the carb, and try using the choke.
Did u clean the jets in carb or u just wash bowl out u got take all jets out and spray carb cleaner in the passages and make sure u can see through the jets if u have spark it will run after u do that
Oh' good USA guy's meby good. Name: wie gerne würde ich da mit spielen. @ my countery 🇩🇪 i olway's got sabatage!. End Mast! stay Name: eine Art Fon prison- Holmes/ House. 15 jehr's orady sadnes.
I'm drooling over that 944🤤🤤🤤🤤
Yep, it’s a nice car for it’s age. Drivers door doesn’t open anymore, sunroof leaks, and the dash is cracked. But only 92,000 miles!
My childhood would have been much more fun if I was a rich kid like these kids.
Yeah $200 is a lot to spend on a motorcycle... luckily I saved up for months to afford it.
@@EthanHervig My Dad Bought Me A Yamaha TTT-110 for only 1,600
@@EthanHervig😂
I turned into a kid last night... bought my sister and myself both pw80's for $400!!
I'm 37, my sis is 34... and we are b3ing kids nowwwwww!!!!
This looks so fun
It was! Always a blast getting an old Dirt bike running again
@@EthanHervig The Name is dirt bike thank you
The hole the gas is coming out is for the injection line for the oil mix
Genuine carbs are the best I don't even try mess with the Chinese ones try rebuild the original
Nobody talking bout the amount of smoke blowing out of the exhaust 😨😬
This is great 😂
I have same bike for my 5 yr old. Super solid little bikes
Nice truck
Thanks it’s my dads, didn’t have my own truck at the time so I just used his lol
Cool man I have one my self I just waiting for my carb to arrive
Avlife 101 Nice! It’s great how cheap the carbs are, can’t ever argue with $12.50!
Ethan Hervig I got one for like $35.00
Did fix the carb pissing everywhere
Avlife 101 Oh, was it Chinese?
No
We are all goons at heart 😂
Heck yeah 🤘🏼😂
@@EthanHervigjust got one for $200 i will be tricking it out as well where did u get the pipe from FMF? Thank you
@@cii5korea217 Sweet! They’re hard to find that cheap these days… the FMF system came on the bike when I bought it!
@@EthanHervigthanks for the reply
What mods/ upgrade do you recommend she runs good but of course I’m going to throw in new clutch and reeds and I just can’t seem to find an after market exhaust for the pw80 Fmf seems to have discontinued the set up for the pw80 😢
Put a delorto 21 mm and a big bore cylinder 👌
I've got a 21mm carb on the way! New video on that soon!
Yeah that will be cool man👊
I bought a mint one for 175 but there is no spark. I most likely just need a whole new wiring kit. But I hope it works good
Yeah could just be the stator or the ignition coil but you never know. If the parts are cheap enough I suppose a wiring kit is worth it.
I would first try a new ignition coil and plug. Don’t cheap out on the coil cause the cheap ones will ground out if they get wet
Can i please have the fmf powercore 2 ? lol
If u got any pw 80 sproket
Yeah them cheap e bay parts are ok but don’t use engine parts that chain will work but won’t last long
Yeah the chain loosened up real quick and I had to get a new one eventually
What rear shock are you using
bxballa17 I am using the stock rear shock with a 1 inch spacer, you can find them online I’m sure
Got to set the float level. I think it's 26mm with the gasket?
RC Outlawz I don’t know. I’ve got a nicer carb on the way. Gonna see what it does.
Ethan Hervig I hear ya. Mikuni OEM is the way to go. The fuel leaking is cause the floats not closing the fuel inlet to the bowl. It’s over flowing out. My sons did the same thing. Good luck bud. Nice channel. Good to see.
I have that instrumental you playing on 3.00....
A $12 carb😂 I can't believe there is such a thing
I know right 😂 it STILL RUNS to this day! No leaks! Lol
U will have to mix gas now and u need to take the injector pump out
You didn’t connect the fuel line right hahaha
😱
Hi bro I have a question, the 2t oil you added to the gas or you put it in the oil tank under the sit?
he prob put it in the oil tank under the seat because im sure it mixes when its running
@@ajbritton1569 it’s mixed because he didn’t hook the line into the carb that’s why gas is coming out the hole that’s where the oil line goes
In my country they use the pw80 machine at a drag race or street race and that thing is a beast if you tune it right . The pw80 machine is similar to the yamha mate v50 or v80 machine. If you look it up its the same but only the pw80 machine is way faster dan the normal japan yamaha mate v50 or v80 machine
If you have a pw 80 sprocket let me kow thanks
If you got a pw 80 sproket let me kow
👍😀
I have one like it but it doesn't turn on. I already cleaned the gas tank carburetor. change filter inside tank and it won't turn on. Spark plug wire has spark. what could be the problem?
Could be a mixture of things, the idle might be too high, the carb might not be tuned right, the bike may have too low of compression, make sure fuel is flowing and getting to the carb, and try using the choke.
Did u clean the jets in carb or u just wash bowl out u got take all jets out and spray carb cleaner in the passages and make sure u can see through the jets if u have spark it will run after u do that
that bike is my size
Chinese carbs are garbage, learn to fix! Parts
Oh' good USA guy's meby good. Name: wie gerne würde ich da mit spielen. @ my countery 🇩🇪 i olway's got sabatage!. End Mast! stay Name: eine Art Fon prison- Holmes/ House. 15 jehr's orady sadnes.
If u got any pw 80 sproket