How to install boat carpet yourself & the best DIY kit to use.
ฝัง
- เผยแพร่เมื่อ 14 ม.ค. 2018
- Dave at extremecoversusa.com shows us how to install boat carpet just like the manufactures and gain access to the premium carpet only the boat dealers have.
Links to supplies:
DIY Boat Carpet Repair Kit goo.gl/BrGf9x
Harbor Freight Stapler goo.gl/QvbVZ8
![[LIVE] : ONE ลุมพินี 70 | คู่เอก "โฟกัส vs สเตฟาน"](http://i.ytimg.com/vi/_fVieQ89DRQ/mqdefault.jpg)
This video gave me plenty of confidence to do mine. All of my edges and corners look great still and here we are 5 years later.
I got outdoor rubber backed mildew resistant carpet at Lowe’s for $1.60/6foot linear. Super resilient
I picked up a 1977 Glas- Ply.. The boat itself has been covered and maintained and the boat is solid.
I'm not much of a Craftsman but was curious about putting in new carpeting this Spring in my boat.
Thx for sharing this info. I had no plans on getting the Carpet from Lowes etc so you just reinforced that reasoning.
Thx Again
Thanks, I needed help with the corners. This is what I was looking for.
Got the homedepot carpet in my boat for 5 years so for ,its definitely not as thick but seems to work just fine
we could learn so much if you let your buddy talk
as a video creator its is obvious the multiple times you shut him down,
don"t be afraid to let the guy who does it every day tell how to do it
good video but heavy on the sales pitch,
that old man did NOT want to be there
Very helpful thankyou
thank you you have a very good vid
Thanks for the video
Dave, I have a 21 x 16 inch 3/4 in marine plywood that I want to completely cover. This was to replace the back of a deck/flip seat back and have one side with cut out corners to fit into the deck. I like the way you cover the corners, but having problems completing all of the corners the same way as you do. Actually the cut results in me having two extra corners on the plywood. Your suggestions would be appreciated. Thanks.
I have an older Lund boat with a rotten side panel that needs replacing. The panel is covered in vinyl. I have purchased some marine plywood and vinyl fabric. What sort of glue or contact cement would you recommend for glueing the vinyl to the wood and should I seal the wood first
Links are not working in the USA either, at least not in Illinois.
Is the glue different for fiberglass than wood? If so, can you explain that?
Hi Dave, Thanks for your video. None of your links are working here in Ireland. Can you PM me with updated links please. Thanks a mill
The website is not working , do you have another website where i can buy them ?
How to carpet a 2x2 piece of plywood.
Were do I get the roller?
im trying to determine if I need to completely coat my marine grade plywood for flooring before the rubberized marine carpet or is it not needed?
AJ Provo paint enamel on regular plywood (don’t use OSB on aluminum boats due to reaction) works great
what thickness cdx?
How do you stick it to Aluminum????
Hi Dave. Going to be replacing the carpet in my ‘71 Larson Shark. Previous owner used some cheap carpet with no rubber backing. It created some bubbling in the fiberglass floor. How can I fix this? Also, I’m going to purchase the “Automarine” carpet from Menards. It’s classified as “Indoor/Outdoor” at the store so I’m confused as to why I can’t use that. Any help is appreciated!
Itz MitchMitch k ,.
I used that same carpet in my boat 2 years ago and it still looks brand new
How do you screw it to the boat? Do you screw through the carpet and leave the screw exposed?
A great question. In a runabout you install the floor first. You can’t roll the carpet underneath the wood.
I think he has given up on the products here or being able to purchase them on his website
Your link isn’t working
Can carpet be installed on aluminum?
Topher Bec my Alumatech boat has carpet glued to the aluminum hatches. Main areas have marine grade 3/4” plywood with carper glued at the edges (not all over)
Your web links are out of date
what mike said
Carper gatekeeping
Regular steel staples on a boat?
Wouldn’t recommend it. Galvanized staples aren’t that much more expensive and are worth the extra penny.
that is not how to carpet a pontoon boat
You have said nothing about the grain of the carpet facing the same way for the entire boat. Also, CDX plywood has voids, knots, cracks etc. I wouldn't use it to make a dog house.
🤣🤣🤣🤣🤣
Do not take your boat to these hacks!
Why show install by placing ply wood on carpet?? Show people what to do but not really lol. I stopped watching after that