how to make simple inverter 3000W , sine wave ,mosfet

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 ต.ค. 2024
  • Power inverter explained. In this video we take a look at how inverters work. We look at power inverters used in cars and solar power to understand the basics of how they operate. We then cover electricity fundamentals, direct current, dc, ac, alternating current, single phase, three phase and split phase, electricity, pulse width modulation, variable speed drives, three phase rectification and more
    #Banggoodsummersale
    Summer Prime Sale bit.ly/2UguT95
    Hot Seller Rankings 2021 bit.ly/3y9nJCs
    Deals for Tools & Electronics bit.ly/2UTrihN
    VIP Exclusive Zone bit.ly/2UUtl59
    You can buy all electronic components for the product here
    👇👇👇👇👇👇
    utsource.net/?...
    To communicate with the channel
    electronicsk66@gmail.com
    👇👇❤️Circuit diagram❤️
    inventorkr.blo...
    You will get high electricity while you are in
    remote areas or far from electricity and cities with this wonderful device.
    Watch an important video here
    • led lights led strip l...
    Make a 12-volt, 220-volt, 3000-watt power transformer from a
    simple circuit, modified sine wave.
    how to make simple inverter 12v to 220v, 3000w, inverter sine wave ,mosfet
    #inventor_KR
    #inverter12vto220v
    Hello my friends,
    I am an electrical engineer and uploading Science &Technology videos twice a week. Please Subscribe My channel. if you want to learn.
    For business enquiries: electronicsk66@gmail.com
    how to make simple inverter 3000W
    • how to make simple inv...
    induction heater 12v DC
    • induction heater 12v D...
    stepper motor driver
    • The simplest way to op...
    cell phone signal booster
    • Cell phone signal boos...
    how to make a small FM radio
    • how to make a small FM...
    fm transmitter circuit diagram
    • Simplify the FM radio ...
    1km fm transmitter circuit diagram
    • 1km fm transmitter cir...
    2n2222 fm transmitter circuit
    • 2n2222 fm transmitter ...
    Turn your phone into a wireless device
    • Turn the phone into a ...
    Electronic projects use transistor
    • Video
    How to make a radio to listen to the airport control tower
    • how to make a radio to...
    how to make a radio.
    • how to make a radio. ...
    inverter,how to make inverter,how to make,inverter 12v to,inverter 12v to 220v,inverter 3.7v to 220v,inverter 3.7 volt to 220 volt,how to make a simple inverter at home,diy,ac to dc inverter,how to make inverter 12v to 220v,how to make an inverter from batteries,3.7v to 220v ac to dc,how to make a simple 3.7v to 220v ac to dc inverter at home,3.7v to 220v inverter circuit diagram,dc to acI
    hope you will help me, in the growth of the channel, donate a little money on my Paypal account
    paypal.me/mahe... Get a free trial of Altium Designer
    👇👇👇👇👇👇👇
    www.Altium.com...
    Free search engine for electronic parts
    octopart.com/

ความคิดเห็น • 860

  • @inventorkr1
    @inventorkr1  3 ปีที่แล้ว +10

    Watch this professional video👇
    th-cam.com/video/Du8S2RaLFoM/w-d-xo.html

    • @nin1ten1do
      @nin1ten1do 2 ปีที่แล้ว +1

      it is sux.

    • @黄蟮
      @黄蟮 2 ปีที่แล้ว

      Hello, can 3000v electrocute wild boars?

    • @黄蟮
      @黄蟮 2 ปีที่แล้ว

      @Kevin Corapi I use this for hunting, it reaches tens of thousands of volts, and if I touch a wild boar, I will die. I also want to play, but I can't do it.

    • @ThePantygun
      @ThePantygun ปีที่แล้ว

      Make a detonating belt.

  • @joelnatividad5005
    @joelnatividad5005 3 ปีที่แล้ว +171

    This is not a sine wave inverter your using a PWM tl 494 ic the output is square wave . Thank you.

    • @yeuientu3303
      @yeuientu3303 3 ปีที่แล้ว +6

      Chính xác. Video này chỉ lừa đc người không biết gì thôi

    • @faztudo-q5w
      @faztudo-q5w 3 ปีที่แล้ว +1

      DC/DC

    • @fidelcatsro6948
      @fidelcatsro6948 3 ปีที่แล้ว +3

      you clever cat!!

    • @joshwayop
      @joshwayop 3 ปีที่แล้ว +8

      He also has diodes on the output.

    • @koushiks_energy
      @koushiks_energy 3 ปีที่แล้ว

      @@joshwayop yes crt

  • @travishein
    @travishein 3 ปีที่แล้ว +17

    It is interesting and visually appealing to look at. But I worry this could also double as a "3000 watt fire starter" or a "3000 watt electrocution machine"

  • @ShawnA560
    @ShawnA560 3 ปีที่แล้ว +126

    3000w? I doubt this can handle more than 100wat. No way it is “pure sine wave “

    • @woodrunner51
      @woodrunner51 3 ปีที่แล้ว +1

      what he said...

    • @rickhunt3183
      @rickhunt3183 3 ปีที่แล้ว +9

      @tukang donlod I didn’t waste much time. I only watched a few minutes and saw the obvious limitations and then just read some comments. The comments were more entertaining. Most people had superior knowledge, like yourself.

    • @trexmidnite
      @trexmidnite 3 ปีที่แล้ว +1

      I want to smash that thing to million pieces

    • @mysock351C
      @mysock351C 3 ปีที่แล้ว +2

      @tukang donlod The really ridiculous part would be someone trying to replicate this, and actually trying to use it as an inverter. It would be an exercise in seeing how fast you can decap transistors. However, it would be a great idea for a channel. Build various cancerous circuits from TH-cam DIY videos knowing there will be flames in the end, and blithely use them like their commercial counterparts from your local store. The results would likely be quite entertaining.

    • @3kikass
      @3kikass 3 ปีที่แล้ว +3

      hahahah i bet it wil do 500kw of pure bullshit

  • @ranggas8814
    @ranggas8814 3 ปีที่แล้ว +79

    I'm waiting for a 3000 watt lamp test, sir

    • @sgsound12
      @sgsound12 3 ปีที่แล้ว +16

      And Im wating for a waveform, a pure sine, a distortion analizer and a simple ampermeter, what is the output voltage? regulation??

    • @lenon.moreschi
      @lenon.moreschi 3 ปีที่แล้ว +13

      3000 watt? Kkkkk 12.6V * 4.4A = 55.44W in 1C. with 54C to 3000W the battery charge runs out in 1.1 minutes and it also melts completely.

    • @Reaktanzkreis
      @Reaktanzkreis 3 ปีที่แล้ว +3

      @@lenon.moreschi I bet it will be last only 5 sek at 3kW. 3kW at 12V will be 250A, no loss include this calculation. Means you will need battery leads with 95mm² cross section. My fuck´n old 1800W inverter got 25mm² battery wires. They beg for mercy if I run my coffemaker for few minutes (with engine running) I measured 170A with a clamp meter while my coffee dripping through to the mug....

    • @trexmidnite
      @trexmidnite 3 ปีที่แล้ว +1

      With 1m views he owes more than 15 years, should be sentenced to that period in jail..

    • @robertbox5399
      @robertbox5399 3 ปีที่แล้ว

      So that is a 4000kVA 50/60Hz mains transformer for 3kW??? 🤣🤣🤣

  • @radiok2ua
    @radiok2ua 3 ปีที่แล้ว +11

    Very instructive construction, but all those cold solder joints really fired off my OCD!

  • @kooan112
    @kooan112 3 ปีที่แล้ว +22

    I love the description the most. "Understanding how ac and dc works, from the basics" then proceeds to make a shady inverter, lies about 90% of its power and output waveform, and makes the whole thing in air soldering.

    • @la7dfa
      @la7dfa 3 ปีที่แล้ว

      I hope he has no education. Its the only way we can explain this shady method.

    • @dollarbutt
      @dollarbutt 3 ปีที่แล้ว

      @@la7dfa where can I find good info on how to design a legit, safe, compact power inverter?

    • @cuf_
      @cuf_ 3 ปีที่แล้ว +1

      @@dollarbutt u cant. Just buy an inverter from market, look the output is dc, maybe 1 watt and no feedback circuit, so the output might even be in kilovolts without load. Market inverters are 10x smaller and the output is ac 50hz. AND a pure 300w? 2000w? Well u can choose. I recommend 300w inverter it costs around 40$ or even 30$.

    • @dollarbutt
      @dollarbutt 3 ปีที่แล้ว

      @@cuf_ I'm in need of a 2000w-3000w inverter

  • @hamidsohrabi3105
    @hamidsohrabi3105 3 ปีที่แล้ว +7

    This circuit is the same as ups..
    But to make an urban sine wave, we have to have a range of positive and negative voltages،And finally, an inductive inductor must filter the square waveform to become a sine waveform ...But I do not think your waveform is sine ... your waveform is probably dc, and we can also give dvd voltage dc, and it works
    Because there is a power supply inside the dvd, and the power supply will be even happier if we give it a dc, because we made its work easier ...😍😘

  • @horrorsilentpicture456
    @horrorsilentpicture456 3 ปีที่แล้ว +14

    3000watts?
    Run Motor 750 watts motors!!
    Mixer ,Drill,Fan 🤔
    Nice video change Transformer 12v 10amps

  • @juliocesarbolfarini5569
    @juliocesarbolfarini5569 3 ปีที่แล้ว +8

    Onda senoidal pura! Resposta está!
    E R R A D A

  • @murisoca1982
    @murisoca1982 3 ปีที่แล้ว +7

    Boa noite ! Seus vídeos são os melhores !!!!! Nunca vi tão bem explicado e fácil de fazer !!!!!!! São os melhores !!!!! Parabéns !!!!

  • @XuthaiTv
    @XuthaiTv 3 ปีที่แล้ว +1

    Nếu sử dụng 1 biến áp cỡ lớn thì có thể sử dụng cho động cơ ,lò nướng, bếp từ , bình nóng lạnh được không vậy

  • @koonjulougrasen4432
    @koonjulougrasen4432 3 ปีที่แล้ว +2

    TL 494 produce square wave form and besides one high frequency transformer generate less than 500 watts.Nice video.

  • @kmlprdn
    @kmlprdn 3 ปีที่แล้ว +17

    I appreciate the effort but it would be much easier to believe this as a 3000W pure sinewave inverter if there was some proof from oscilloscope and a 3000W load

    • @DL-kc8fc
      @DL-kc8fc 3 ปีที่แล้ว +6

      3 kW is of course nonsense. The transformer comes from a small UPS It can therefore provide power up to 150W. Sinusovka is also probably only in the name.

    • @kmlprdn
      @kmlprdn 3 ปีที่แล้ว +2

      @@DL-kc8fc agreed

  • @captainyak3948
    @captainyak3948 2 ปีที่แล้ว

    Interesting... and well done! You really should sell DIY kit and make it easy for the electronics hassle. Plus these days you don't know what's available and what is not...

  • @jean-clauded5823
    @jean-clauded5823 3 ปีที่แล้ว +3

    No thermal paste under the Mosfets?
    And plenty of cold solder joints. You're supposed to heat the metal, and let the metal melt the solder, not using the iron to melt the solder.
    And how did you arrive at 3000 watts? Especially from 8 1650 batteries?

    • @karonte123
      @karonte123 3 ปีที่แล้ว

      Not eight batteries,SIX !!!

  • @roydjoengkel3005
    @roydjoengkel3005 3 ปีที่แล้ว +2

    wow ❤👍it's like a refinery chemical power gas plan

    • @jasonrabor4142
      @jasonrabor4142 3 ปีที่แล้ว

      I was thinking the same thing too

  • @khairilelektronik
    @khairilelektronik 2 ปีที่แล้ว

    very good electronics project, i like it very much

  • @mrxllone
    @mrxllone 3 ปีที่แล้ว +8

    Its square wave output has almost nothing to do with a sine wave. Also those thin wires can't handle 3000W at all.
    Besides the "fake specifications" it is also horribly dangerous to have uninsulated wires floating around with mains voltage levels. The Li-Ion batteries have been connected WITHOUT ANY PROTECTION which is horrible, so aditionally this thing can burn your house down if a short circuit occurs. May it be easy, but its definitely not a sine wave output, and it definitely won't be able to handle 3kW.
    Please, don't write clickbait titles like that. It makes beginners think that it's really so easy to build a proper inverter. Thank you.

    • @safetyfirst1484
      @safetyfirst1484 2 ปีที่แล้ว

      Own a 1Kw 12v inverter that uses the same IGBT's (G40N60 600v 40A). Getting 3Kw from that setup is clearly not possible.

  • @h.b.l
    @h.b.l 3 ปีที่แล้ว +5

    does it have pure sine wave? I look for!

  • @christophercobb4317
    @christophercobb4317 3 ปีที่แล้ว

    You deserve a thumbs up for that one man

  • @nblchannel2245
    @nblchannel2245 3 ปีที่แล้ว

    Luar biasa mantap top

  • @bloxGGyt
    @bloxGGyt 2 ปีที่แล้ว +1

    A complex electronic circuit, but it's great.
    Good job

  • @VS-wb6lz
    @VS-wb6lz 3 ปีที่แล้ว

    ребятки, что вы возмущаетесь, задача такая и стоит, больше коментов и просмотров. что и происходит, лям просмотров то уже есть.

  • @arildocarvalho7269
    @arildocarvalho7269 3 ปีที่แล้ว +1

    Very Good this is a good inversor for using

  • @francisbchambala6834
    @francisbchambala6834 3 ปีที่แล้ว +5

    Good idea,Drawing circuit would be better and sound explanation will help others too

    • @kokyaw3740
      @kokyaw3740 2 หลายเดือนก่อน

      8:21 8:21 8:21 8:21 8:21 what are the component
      8:21

  • @forexextrasensory1358
    @forexextrasensory1358 3 ปีที่แล้ว +22

    Я думал что-то такое получится планетарного масштаба, столько деталей, столько соединений а чел. Взял и в оканцовке лампочку Ильича включил и весь кайф обломал.

    • @inventorkr1
      @inventorkr1  3 ปีที่แล้ว

      Спасибо за подписку и комментарии

    • @blg53
      @blg53 3 ปีที่แล้ว +2

      @@inventorkr1 It is not 3000W, it is not pure sine wave, it is not 50 Hz to feed anything useful, it is basically useless. But other than that .... yeah, great video. Oh, and Forex Extrasensory was not exactly complimentary either, "кайф обломал" means he expected much more, but you disappointed him greatly.

    • @resadmirabilis9778
      @resadmirabilis9778 3 ปีที่แล้ว +1

      :)) А у меня и без инвертера лампочки светятся. И без проводов. Прямо в упаковке, нераспечатанные. И перегорать никогда не должны.
      Просто Теслу почитал маленько.
      Но видео интересное.
      Спасибо.
      :)

    • @Игнатурусбиенко
      @Игнатурусбиенко 3 ปีที่แล้ว

      @@resadmirabilis9778 плутуниевые?

    • @resadmirabilis9778
      @resadmirabilis9778 3 ปีที่แล้ว +1

      @@Игнатурусбиенко :)) Обычные лампы из магазина. Видео на моём канале. В конце его я даю схему вечного двигателя Николы Теслы, на реле и аккумуляторах, чтобы проще было сделать. Точнее, это один из вечных двигателей Теслы, у него их было несколько. Берите, пользуйтесь. Никакого подвоха, всё работает. Это Тесла. Славянин, создавший наш мир.

  • @3pe
    @3pe 3 ปีที่แล้ว +8

    a generic house fire produces way more then 3kW, depending on how fast it goes.

  • @jaswantsinghthakur341
    @jaswantsinghthakur341 3 ปีที่แล้ว

    Really very simple technique you adopt to understand inverter, Thanks

  • @L-udo
    @L-udo 3 ปีที่แล้ว +5

    Man. It would be a miracle if you could draw over 100! amps through cable smaller than a pencil connected to those batteries.

  • @robertoorempuller873
    @robertoorempuller873 3 ปีที่แล้ว

    o link do Blog zeroetchnology tá quebrado ou foi removido. tem outro?

  • @Buddhamaniac
    @Buddhamaniac 3 ปีที่แล้ว +3

    This is a really great video!!!...if the intent is to demonstrate really poor soldering techniques to be avoided.

    • @onepercentile
      @onepercentile 3 ปีที่แล้ว

      Totally.. like solder getting hot and components crashing and shorting into each other like it's 4th of July.

  • @TheKaos90
    @TheKaos90 3 ปีที่แล้ว +8

    This will Insta-melt all the solder joints.Never mind the 15 amps on the high voltage side, imagine the 250 amps on the low voltage side

    • @KarlA-vk4kn
      @KarlA-vk4kn 3 ปีที่แล้ว

      Obviously no health or safety involved here! 🙄

  • @electroniquepassion
    @electroniquepassion 3 ปีที่แล้ว +2

    *Super l'ami !👍👍👍👍👍👍👍*

    • @inventorkr1
      @inventorkr1  3 ปีที่แล้ว

      Merci mon ami❤️❤️❤️

  • @DavidTorres-kl2rt
    @DavidTorres-kl2rt 2 ปีที่แล้ว

    buen trabajo good job gut e gemach

  • @messiasborges6715
    @messiasborges6715 9 หลายเดือนก่อน

    cool show how do I change the transformer to 110 volt, or can I put a 110v transformer in place of the 220v, without touching the components ??

  • @russellteejaymolina6736
    @russellteejaymolina6736 3 ปีที่แล้ว +5

    Can you post a video using oscilloscope to see its output too.

    • @brettski74
      @brettski74 3 ปีที่แล้ว +3

      Of course he won't. The output isn't a sine wave. The waveform across the transformer is clearly a square wave and the output looks like it's DC given the secondary side power rectifiers and how they're connected. Also, based on the light bulb test and when he moved the pot to vary the oscillator frequency, you could hear quite audible high frequency vibration, so the output is likely very noisy DC at that which is also not surprising given the lack of much of anything on the secondary side to clean it up.

    • @leonardoaleatorio7933
      @leonardoaleatorio7933 2 ปีที่แล้ว

      Yeah!

  • @JosedaSilva-ro8oq
    @JosedaSilva-ro8oq 2 ปีที่แล้ว

    Sem fala explicativa… Projeto Capenga!!!

  • @gandaulf_fpv6925
    @gandaulf_fpv6925 2 ปีที่แล้ว +1

    Your videos are always very relaxing. Thank you for the great content.

  • @mrsunelectronics544
    @mrsunelectronics544 3 ปีที่แล้ว

    für den Notfall sicher ganz nützlich, vorallem wenn man das aus gängigen Elektronik Teilen, die man aus alten Spender Geräten sowieso da hat machen kann PC Netzteile usw. 👍👍👍

  • @ИванИванов-х9с7д
    @ИванИванов-х9с7д ปีที่แล้ว

    Он сможет от таких аккумуляторов даже пол минуты проработать на такую мощьность

  • @cuongovan4864
    @cuongovan4864 2 ปีที่แล้ว

    Hi ad
    Is there any problem with long term operation?

  • @chilledoutpaul
    @chilledoutpaul 2 ปีที่แล้ว

    I am not going in to many details so you will have to use your electronic knowlage 1, check the diode packs Dsp25 one of them are connected wrong , or it are short circuit or over piv. and if it was working would the DVD player work on DC also the clamping dioces on the driver transistors are on the wrong pins B & E and i would have used a shotkey diode 4007 (mind you the circuit would probably still work until the spikes went too high) ETC what can you spot wrong with it?

  • @brucegotohell1323
    @brucegotohell1323 3 ปีที่แล้ว +2

    Hi,
    Instead of uninsulated wire, I would recommend using insulated solid-core wire (strip off the outer jacket of 12 AWG (or EU equivalent) of a length of Romex cable and use the insulated conductors from the cable. Also helps insure that only the appropriate wires are soldered together.
    Cool project, Bruce

    • @opongelli
      @opongelli ปีที่แล้ว

      Not required

  • @SIDERROCK
    @SIDERROCK 3 ปีที่แล้ว +4

    выпрямитель вооще шедевр ... 😂😂😂

  • @kayrlisalhawaa9455
    @kayrlisalhawaa9455 3 ปีที่แล้ว

    Please, I hope for a reply from you. Will the 12 0 12 converter work in the place of the converter in the video?

  • @omidf1104
    @omidf1104 3 ปีที่แล้ว +1

    Hello dear friend, do you think it is possible to generate one volt using capacitors, resistors, diodes, transformers, magnets, inductors, transistors, electricity, please help me 🙏

    • @inventorkr1
      @inventorkr1  3 ปีที่แล้ว

      Voltage control circuit

  • @robiulislamkualakushtiaban1985
    @robiulislamkualakushtiaban1985 2 ปีที่แล้ว

    Verey nice my friend Verey good my friend.

  • @anhtu6974
    @anhtu6974 3 ปีที่แล้ว +1

    Very good from Vietnamme!

  • @jailsonaraujo5766
    @jailsonaraujo5766 2 ปีที่แล้ว

    Sou seu novo inscrito😁

  • @Dapper61
    @Dapper61 3 ปีที่แล้ว +21

    Нет ам не синуса не 3кВт, макс что из этого транса выжмешь 300Вт, а из батареек и 100 не выжать.

    • @DL-kc8fc
      @DL-kc8fc 3 ปีที่แล้ว

      If he used a small battery 12V9Ah = 108Wh, for example from a UPS, he could take 100W for a while. Theoretically 1 hour, but practically it's about 5-10 minutes, because that's exactly what the backup battery allows together with the inverter and especially with the transformer up to 140W from video that comes from a small UPS. This transformer has some class and can withstand short-term heating, so it can provide up to 180W of power for a while. Higher loads are not recommended, even if more VA power is indicated on the label. In any case, this transformer will not provide 3kW of power.

    • @mamiyaservice
      @mamiyaservice 3 ปีที่แล้ว

      @@DL-kc8fc ИБП от apc sua3000 имеет голый вес 54кг.основной вес это трансформаторы и радиатор.

    • @DL-kc8fc
      @DL-kc8fc 3 ปีที่แล้ว

      @@mamiyaservice Apparently you found yourself in a different topic. The subject that is on the video is not what you want to present, is it? The 12V9Ah battery is used in small UPSs that can hold a computer for a while. The power they reliably supply is 108W (according to the 12V9Ah battery and the output transformer). If a ferrite pulse transformer is used, the cross-section of the 1cm2 core can provide power around 300W, but the battery capacity will be sharply reduced. That's why I have 5-10 minutes. If you use a 3kW inverter with a heatsink and a large transformer, after connecting a 100Ah battery, you can achieve these outputs (really 3/4, which is 2.25kW). This is not important, because I am primarily talking about a device from video that cannot allow 3kW consumption, but only about 100W (for one 60W light bulb). It will allow 300W for a while. In addition, it does not have 50-60Hz and does not form a sinusoid (it is pulsed). It would be necessary to use more mosfets at 3kW ... The author of the video cannot count and does not know that the power is determined by taking from the secondary winding. The power is mirrored to the primary winding (P1 = P2) and it doesn't matter how many mosfets A can handle. The authors of similar videos make a fatal mistake in their strange "math".

  • @zeeebeee1511
    @zeeebeee1511 2 ปีที่แล้ว

    Hi there, very nice video, can you please help me understand how this DC to ac work? I know the rectifier but the other way around looks much more complicated, i never understood why there is a transformer always used, i know how they work and also know how to wind them, what i don't get is, why there is not a single post that explains how to convert DC to ac without the transformer and without boosting it, i only need the first stage, i need a circuit DC to ac converter from 12v DC to 12v 0 12v ac, pure sine wave (for diy car tube amp) is that possible? Or should I connect to the alternator by bypassing it's rectifier, i know this is crazy but that's what I'm left of with, please help.

  • @cryptolovers5202
    @cryptolovers5202 3 ปีที่แล้ว +1

    Helpful video. Sir please make a video mini solar inverter.....I need it badly 😀

    • @inventorkr1
      @inventorkr1  3 ปีที่แล้ว

      😜ok

    • @maxwfk
      @maxwfk 3 ปีที่แล้ว

      Get yourself a cheap one from Amazon

  • @Jptoutant
    @Jptoutant 2 ปีที่แล้ว

    the mosfets are not isolated from the heatsink? you can do that?

  • @jasmanmudahan407
    @jasmanmudahan407 3 ปีที่แล้ว +1

    Very good.. prosesing impoten to leading...ok..

  • @0Light6and3documentary9
    @0Light6and3documentary9 3 ปีที่แล้ว

    Super congratulations, H ? 3000w ?

  • @starets_fugas
    @starets_fugas 3 ปีที่แล้ว +5

    Когда говорят о синусе на инверторе, то имеют в виду синус с частотой 50 Гц, а здесь ВЧ трансформатор!

  • @loganxmen3114
    @loganxmen3114 3 ปีที่แล้ว

    COOL.....👉......🇨🇱👷..... GRACIAS....!

  • @pablitooturecki1499
    @pablitooturecki1499 3 ปีที่แล้ว

    What a skill dude

  • @tryfonpanagopoulos5999
    @tryfonpanagopoulos5999 3 ปีที่แล้ว

    You are professional!

  • @slgreat3398
    @slgreat3398 2 ปีที่แล้ว

    What kinds of power supply you used for remove the transformer

  • @WILLIAMTHOMASFARRELL
    @WILLIAMTHOMASFARRELL 3 ปีที่แล้ว +1

    Does that give you a true sign wave or DC effective voltage.

  • @marisvaldolimamacedolimama7650
    @marisvaldolimamacedolimama7650 3 ปีที่แล้ว

    Vou te transformar no homem mais rico do planeta , voce deveria vender esses elementos que compõem esse lindo projeto , enviando via correio colocando o frete embutido no preço a quem interessar , conn certeza o Sr iria vender muito , Fica o Bizu ! 👍🏻

    • @inventorkr1
      @inventorkr1  3 ปีที่แล้ว

      Obrigado pelo seu interesse no projeto

  • @Viktor_Smilenko
    @Viktor_Smilenko 3 ปีที่แล้ว +4

    Мда, круто ничего не скажешь. Ещё б комментарии вообще огонь было бы.

  • @nin1ten1do
    @nin1ten1do 2 ปีที่แล้ว

    nice BIRD nest _)) just missing submerge all in EPOXY

  • @cristianomelo4598
    @cristianomelo4598 2 ปีที่แล้ว

    is there the possibility of making an adaptation to plug in a car battery?

  • @mrrk1151
    @mrrk1151 3 ปีที่แล้ว

    Can suggest me need 3000w inverter which one to buy

  • @matzew848
    @matzew848 3 ปีที่แล้ว +2

    people will die from videos like this.

  • @gonzaloflora9377
    @gonzaloflora9377 3 ปีที่แล้ว

    hello very good your investor. I would like to know what components you use .. greetings from Argentina!

  • @tonghopgame7867
    @tonghopgame7867 2 ปีที่แล้ว

    Chạy máy bơm hút sâu được không bạn

  • @royspeakman1157
    @royspeakman1157 3 ปีที่แล้ว

    it would be great if we had the circuit diagram ! cant do anything with this !

  • @apibosconews
    @apibosconews 3 ปีที่แล้ว

    Já que o Charle Chaplin não fala, então vamos lá: Transistor G40N60 libera 160w à 25 graus - 160 x 6 = 960w máxima potência sem aquecer os dissipadores, mas dá para trabalhar com 500w tranquilo; mas cadê o circuito gerador da frequência de 60 Hz? Se ligar Lâmpada LED, por exemplo, com essa alta frequência, vai explodir as mesmas. Quanto ao transformador não posso dizer nada, o que eu tenho aqui, um toróide de 3.500w, pesa mais de 25Kg. Paro por aqui.

  • @electroboy3607
    @electroboy3607 2 ปีที่แล้ว

    Thanks...nice creative work...👍👍👍🤗

  • @Columbariusify
    @Columbariusify 3 ปีที่แล้ว +1

    That is nice! Oral explanation would be better.

  • @lucletv2768
    @lucletv2768 3 ปีที่แล้ว

    Hay quá. Bạn có thể cho mình cái sơ đồ lắp ráp và đầy đủ tthông số của các linh kiện được không

  • @karlwerkmeister2409
    @karlwerkmeister2409 3 ปีที่แล้ว

    Gibt es dazu auch ein Stromlaufplan und genaue Angaben zu den Bauteilen z.B. Trafo

  • @mimomami7687
    @mimomami7687 3 ปีที่แล้ว +8

    هذه الدارة صحيحة ولكن تردد التيار فيها عالي جدا حوالي 8 كيلو هرتز لا يسمح الا بتشغيل مصباح عادي او كاوي لحام واي جهاز آخر سيتلف مباشرة في حال توصيله لذلك صانع المحتوى لم يظهر لنا ملاقط التغذية كاملة

  • @hasn812
    @hasn812 3 ปีที่แล้ว +1

    Good

  • @baroqachannel5510
    @baroqachannel5510 3 ปีที่แล้ว

    How to buy this inventer your product. Thanks.

  • @АндрюхаВасильевич-ъ1з
    @АндрюхаВасильевич-ъ1з 3 ปีที่แล้ว +1

    Вот если бы электропечку киловатт на 2,5-3 подключил и нагрел до красна. Ну можно борща сварить или на крайняк чая скипятить. Тогда да, вещь полезная.

  • @tonyferreira6679
    @tonyferreira6679 3 ปีที่แล้ว +1

    Cool! So fast.Thanks!

  • @baroqachannel5510
    @baroqachannel5510 3 ปีที่แล้ว

    Dear inventor Kr.
    Is this inventer Pure sine wave ???
    Thanks 👍

  • @anz_max
    @anz_max 3 ปีที่แล้ว +8

    Всё очень просто, учитывая мобильность.
    Где 3000 Вт?

  • @arildoaparecidocosta5729
    @arildoaparecidocosta5729 3 ปีที่แล้ว +6

    Ótimo vídeo trabalho gualidade total bazuka Foz do Iguaçu pr Brasil

    • @studiotattoo4325
      @studiotattoo4325 3 ปีที่แล้ว

      este vídeo e copiado de outro canal esse inversor não tem 3000w o dono do canal nem sabe o que esta fazendo alí so para vender propagandas e receber doações

    • @joaoreinaldo6034
      @joaoreinaldo6034 3 ปีที่แล้ว

      É isso aí, esse cara tenta iludir as pessoas, muitos ainda acreditam.

  • @igorkvachun3572
    @igorkvachun3572 ปีที่แล้ว

    Yes inverter🔋⚡ 🔌💡👍

  • @kitamuram4389
    @kitamuram4389 3 ปีที่แล้ว +1

    This 3D wire work is a smart way to build a power circuit without ohmic thin PCB. I hope this work goes as 3D printing..

    • @TheRealKoolguy007
      @TheRealKoolguy007 3 ปีที่แล้ว

      I've toyed with the idea of 3d printing a pcb with tracks to lay copper wire into. It would be nice to make a cad plugin to convert normal pcbs to this type.

  • @ajayakumarsreedharan5849
    @ajayakumarsreedharan5849 3 ปีที่แล้ว +1

    My Friend When you make any Electronics Project. 1st You Have To Make Drawing? .

  • @razafindrakotoandrianjafim5178
    @razafindrakotoandrianjafim5178 3 ปีที่แล้ว

    merci beaucoup pour les information, et si je voudrais augmenter 5000 à 6000w, ce systeme, qu"est ce que je dois ajouter, merci déjà pour les informations et les aides que vous nous avez donneé

  • @andreeaviciriuc5267
    @andreeaviciriuc5267 2 ปีที่แล้ว

    Ok felicitări

  • @rangelflavio
    @rangelflavio 3 ปีที่แล้ว +1

    Can you put link to the circuit again? ( the listing in the description is broken)

    • @inventorkr1
      @inventorkr1  3 ปีที่แล้ว

      inventorkr.blogspot.com/2021/03/how-to-make-simple-inverter-3000w.html

  • @chbonnici
    @chbonnici 3 ปีที่แล้ว

    Where is the circuit diagram. It would help.

  • @baroqachannel5510
    @baroqachannel5510 3 ปีที่แล้ว

    Mr, can you help me, I want to make Inventer 2500w 24v Pureshine wave. How to do that. Thanks

  • @mahmoodalshamer6682
    @mahmoodalshamer6682 2 ปีที่แล้ว

    Plaese the diagram of the circuit and the ICs used

  • @ElectricalSuperTrick
    @ElectricalSuperTrick 3 ปีที่แล้ว

    Good video

  • @ritanshugaikar7800
    @ritanshugaikar7800 3 ปีที่แล้ว

    which Transformer you use

  • @bulla8631
    @bulla8631 ปีที่แล้ว

    how’s to build worlds band radios SW1 SW2 or LW

  • @Алексей-п5ю6ю
    @Алексей-п5ю6ю 3 ปีที่แล้ว +1

    приветствую ! Видео просто класс !!! А надолго батарей в таком инверторе хватает ? Сколько часов работы ?

  • @j.pariyapala78
    @j.pariyapala78 ปีที่แล้ว

    Great 👍👌

  • @aerofart
    @aerofart 2 ปีที่แล้ว

    Nice. But can it power s toaster?

  • @hl-experiment9829
    @hl-experiment9829 3 ปีที่แล้ว

    perfect soldering