And? If pressure in a exaust pipe is greater than outside it will take any path to equalize. And considerering that the muffler is more restrictive than that cherry bomb, most of the gases will go there.... That 90 degree, will only make the flow more turbulent.
cutout installed post cat, at 90 degrees with a muffler attached... the only way this can get worse is if he re-rerouted it back into the main exhaust 😂😂😂😂😂😂
@@dashzergames7967 think he means have it coming off the start, so non switched it would be stock exhaust (cat and muffler) and when switched it would be straight piped
No this wont hurt or give negative effects is has enough back pressure and is freed of the stock muffler i tested this on my rb25de neo on a dyno now gone to det and 4inch straight pipe free as a bird turbo needs no backpressure
@@squigglycups5666 😂 Sticks and stones. I didn't make the video. I couldn't care any less if anyone believes me. The video was posted in order to receive clicks and comments. I commented and moved on with my life. I suggest you do the same.
this foo put a muffler on a cut out 😂😂😂
this straight-through muffler should be in the driver's ass
Prob to remove rasp sound
Hilarious! 😂😂
No es tonto esta bien puesto despues del catslizador doy ingeniro de escapes mexico
At least the welding is better than most muffler shops in the states lol 😂
most to all exhaust will still go straight to the muffler....the exhaust won't take a 90 degree turn if it's not blocked
And?
If pressure in a exaust pipe is greater than outside it will take any path to equalize. And considerering that the muffler is more restrictive than that cherry bomb, most of the gases will go there....
That 90 degree, will only make the flow more turbulent.
Yeah. The only good cutouts are the one's where it blocks one side while opening the other
How much exhaust do you want from your cutout?
Some of it
Better than most people can do
I woulda put it behind the cat lmao
What a waste of time and quality work ...they send the instructions in the wrong language
actually they did put it behind the cat, first it goes manifold/headers then cat converter then resonator then muffler (if so equipped anyways!)
@shadowcat4963 exactly so they put it behind the cat in front of muffler
When you wanna race but emissions is a thing 😂
Mufflers have nothing to do with emissions
@@2GrinderRide34its after the cat so…
That doesn’t sound to bad.
That sounds nice 👍🏽
Stop lying to him
cutout installed post cat, at 90 degrees with a muffler attached... the only way this can get worse is if he re-rerouted it back into the main exhaust 😂😂😂😂😂😂
How does this work with a str8 pipe?
It would be pretty pointless ngl
@@Matthew-mt2fc how its u can switch it from quiet to loud
@engineoverheat7407Even if I closed the valve would it still be loud?
@@wexerst9233then the gasses have no where to go...
@@dashzergames7967 think he means have it coming off the start, so non switched it would be stock exhaust (cat and muffler) and when switched it would be straight piped
这共振不得让人头晕目眩？
How can I get this service,I nid one
Must be stunky inside the car.......?
Абсолютно все здесь сделано неправильно. Разве что сварочные швы красивые
You made it incorrect, the sports exhaust section should be straight not with 2 90degree bends in it 😂
At least put a 45° bend instead of a 90° bend 😅
Why it must be 45 degree? Is 90 degree bend safe?
its not that its unsafe or wont work but a easier flow is easier flow -easier path of resistance less back pressure ect.
Price
You need to extend it out
And what does he want it for. It's not going to make him go any faster.
It’s not always about going fast.. people do it for the sound
bro just put on an extra on demand resonator😂😂😂
Great way to make yourself a target for sugar in your gas tank for annoying the neighbors lmfao
Bc I like my car louder? The cutout is so it doesn’t have to be loud 24/7 you’re acting like he installed open headers. Also most ppl got cameras lol.
@@jeremiahtesta5694 cameras and guns! Lmao.
By kahase kare
Yeah cute one 😅
He installed this all wrong
Kenalpot cumi-cumi darat
つけ方が違う、このイントールでは😂常に純正エキゾーストに排気ガスが流れます😂😮頭の中身の薄さ
Made in Mexico for sure 😂😂😂
Kinda whimpy
Very ugly welding. My question is why the guy doesn't use gas protection when he welded???? 🤔
that weld looks better than most shop's welds out there
Does nothing. I like the 90 you got. Another controlled exhaust leak cutout system worthy of zero performance gains.
Why not save enough to replace the actual exhaust?
Because this is an example of “Lipstick on a Pig 🐷 “.
because they do the same thing if not more for less money
😂 its only surface rust on the exhaust why would you pay hundreds to replace it wen you just want a loud car sometimes
😂😂😂
Dumbest exhaust design I’ve seen 😅 bro definitely doesn’t understand how cars work
lame
C'est de la merde
🤦
Louder doesn't equal more power.
If you do it wrong. It'll get louder but can actually hurt performance.
Nice try but this is a fail.
☝️🤓
No this wont hurt or give negative effects is has enough back pressure and is freed of the stock muffler i tested this on my rb25de neo on a dyno now gone to det and 4inch straight pipe free as a bird turbo needs no backpressure
@@meatsauce8454
I never mentioned anything about a turbo.
I'm still correct.
@@franktaylor7617
Actual narcissistic redditor in the making right here.
Might want to explain how your correct, more people might believe you.
@@squigglycups5666
😂
Sticks and stones.
I didn't make the video. I couldn't care any less if anyone believes me.
The video was posted in order to receive clicks and comments.
I commented and moved on with my life. I suggest you do the same.
Thiiiiiiiiiis nigga here really reinvented the wheel for this.?