CT Toys is killing it. I hope that they do a Mafex Brown suit Wolverine. Even if Mafex does a re-release on their official version.. I’d get both lol. I feel with CT scaling a bit smaller that would even help their version of a Wolverine because as much as I love my Mafex Wolverine.. I feel he could be a tad shorter
Honestly im surprised by how tall the KO still is. I expected something like their black suit Tobey or the how short mafex Venom KOs are. If i didnt take one of fhose Venoms and make it a Spiderman I'd have waited for this one to release
This CT Toys release has been really exciting!! I hope they do the Scarlet Spider and Sensational/Amazing Spider-Man figures too, they've already shown off prototypes of a Miles Morale 092 Bootleg
So I understand the CT toys verison is a bit smaller in comparison to the official version by Mafex, but I’m curious if the mafex head and neck can fit on the body of the CT Toys version. I’m asking because I’m hoping I can use custom headsculpts meant for the Mafex on the CT Toys.
Thanks for the review! Didn't know a KO existed of the black suit Mafex. I'll spend the normal price on a figure I REALLY want, but on others I usually pass. When there's a decent KO floating around? I'll pick it up. Did CT make a ko of the comic shaded Spidey?
@@venomouscollectoridk what they were thinking. Cause its only some parts that are white plastic. The heads,neck, shoulders,biceps and forearms. Important places where parts can paint rub. The rest is black plastic
@@bladerj that would only make sense if it’s a primarily white design. A primarily black design with black plastic allows the paint chipping to only exist on lesser areas like the logo and eyes.
@@22B112 its easier to paint black over white, and its easier to cover white over black. but when it comes to cleaning, its easier to do dark colors, so painting black over white is always prefered, like the eyes and torso.
A question i have is the height,in some videos i see that he is really short,but yours is almost the same height as the original. Did you make some mods or did it cone out like that?
@@venomouscollectorI think there’s two versions of the bootleg, one that’s about the same height as the original and one that’s short and doesn’t look that good
mafex has always had a bad paint aplication, you should see the complaints on the evangelion series, i got lucky with mine, even the tiny entry plug was well painted.
i dont understand why these bootlegs are smaller then the original,also why are they using a custom head thing. that looks like what you see in buck figures
@@datdude158 they are illegal, that doesnt matter, its like the body is shrinked 15% and they have no way of knowing wich mold it came from,it seems they have the 3d tooling, rather than physical copy.
![fellow fellow - Proud [OFFICIAL MV]](http://i.ytimg.com/vi/9uZF7BlUQPE/mqdefault.jpg)
I bought this here -> www.aliexpress.com/item/1005007084405331.html?spm=a2g0o.order_list.order_list_main.31.2d185c5fCDsAVS&gatewayAdapt=glo2deu
Man... I think it says a lot that I couldn't tell which one was the bootleg next to each other, and I have the mafex reissue
CT Toys is killing it. I hope that they do a Mafex Brown suit Wolverine. Even if Mafex does a re-release on their official version.. I’d get both lol.
I feel with CT scaling a bit smaller that would even help their version of a Wolverine because as much as I love my Mafex Wolverine.. I feel he could be a tad shorter
While you're going for either (bootleg or original), I refuse to die until I see a CT Toys tan wolvie
I really hope they do Mafex Venom. I wanna get my hands on him to do a custom Spiderman 3 venom but I really don't wanna pay out the nose for the og.
There's already another mafex bootleg venom
@@JediGPbut it's not the CT version ( ct version has better quality and build)
I'm fan
@@amirhoussamatik6133 bruh 💀
@@SC29_EDITS the bootleg Mafex venom from years ago also had great quality and build, so does so many other bootlegs that aren’t from CT.
Thank you for the review!! I’m waiting for mine atm
I’m glad that this thing is actually good. I was planning on ordering him and it’s good to know that he will more than likely be good
Ct toys needs to bootleg the tasm 1 spidey. That would sell so well
@@Saiyan1229 Absolutely
There was a leak that they are more likely doing that figure!
Many thanks sir. This is a solid review for a really good ko. Thanks again 👍🏻✌🏻👌🏻
Honestly im surprised by how tall the KO still is. I expected something like their black suit Tobey or the how short mafex Venom KOs are.
If i didnt take one of fhose Venoms and make it a Spiderman I'd have waited for this one to release
looking forward to mine arriving
I have the original, I ordered this one just now because I want the unmasked head for my marvel legends spider-man lol. Thanks for the review
If the butterfly wasn't so disjointed looking (pun intended) I can't really see any reason to get the original. Even the Peter head is great on the KO
This CT Toys release has been really exciting!! I hope they do the Scarlet Spider and Sensational/Amazing Spider-Man figures too, they've already shown off prototypes of a Miles Morale 092 Bootleg
Next - new ct miles morales please 🙏🏽. Hi from New Zealand. 😊
So I understand the CT toys verison is a bit smaller in comparison to the official version by Mafex, but I’m curious if the mafex head and neck can fit on the body of the CT Toys version. I’m asking because I’m hoping I can use custom headsculpts meant for the Mafex on the CT Toys.
Really good
Bet I’m finna buy this
Thanks for the review! Didn't know a KO existed of the black suit Mafex. I'll spend the normal price on a figure I REALLY want, but on others I usually pass. When there's a decent KO floating around? I'll pick it up. Did CT make a ko of the comic shaded Spidey?
It looks very good i had to buy two
I’m going to headswap this and modify the torso to become Spectacular version Symbiote Spidey
My thoughts exactly, just need to find a spectacular headsculpt lol
Wow thanks❤ excellent review
Can you give me the link to bootleg please😅
@@DarkNinja7 Just check any Aliexpress seller with good feedbacks
@@venomouscollector Yeah I am waiting for some feedback but there isnt any... But still thanks
@@venomouscollector Yeah I am waiting for some feedback but there isnt any... But still thanks
@@DarkNinja7 I meant check the overall feedbacks
Apparently its also fully black plastic. Which is wayyy better than the white plastic on mafex
@@Saiyan1229 Oh, I didn't know plastic on Mafex is white 😆 why would they do such a thing?
@@venomouscollectoridk what they were thinking. Cause its only some parts that are white plastic. The heads,neck, shoulders,biceps and forearms. Important places where parts can paint rub. The rest is black plastic
@@venomouscollector cos its easier to paint black over it and fine tune spots like the logo.
@@bladerj that would only make sense if it’s a primarily white design. A primarily black design with black plastic allows the paint chipping to only exist on lesser areas like the logo and eyes.
@@22B112 its easier to paint black over white, and its easier to cover white over black.
but when it comes to cleaning, its easier to do dark colors, so painting black over white is always prefered, like the eyes and torso.
Which seller did you buy it from? Can you share the link?
Now all we need is regular suit
Is the quality control better on the CT Toys bootleg?
So how tall is the ct ver? Never had mafex spidy😅
Yeah I need a CT toys tiger striped or brown Wolverine I’m not paying those crazy ass prices 😂
Hope CT Toys makes a bootleg Bane
Where do yall buy this?
bro mines taking forever to arrive 😭😭😭
Link?
A question i have is the height,in some videos i see that he is really short,but yours is almost the same height as the original. Did you make some mods or did it cone out like that?
@@luciothehedgehog2468 Strange. Mine came like this, no mods.
@@venomouscollector uh,well thanks for letting me know👍
@@venomouscollectorI think there’s two versions of the bootleg, one that’s about the same height as the original and one that’s short and doesn’t look that good
@@phrog.4809 I checked other reviews and yeah it seems like I got lucky with this one
I broke my original one
I'm still gonna try and fix it
But I think I'm gonna get this one just in case
Where did you get the figure?
Aliexpress
mafex has always had a bad paint aplication, you should see the complaints on the evangelion series, i got lucky with mine, even the tiny entry plug was well painted.
I found one for 11 dollars with shiping and taxes
Where?
@@Jbernandino Aliexspress
@@Jbernandinoaliexpress
You can easily find one for 11 bucks there
i dont understand why these bootlegs are smaller then the original,also why are they using a custom head thing. that looks like what you see in buck figures
Probably so they don’t get accused of robbing the same mold
@@datdude158 they are illegal, that doesnt matter, its like the body is shrinked 15%
and they have no way of knowing wich mold it came from,it seems they have the 3d tooling, rather than physical copy.