ENJOYWOOD Precision Multi-Angle Drill Guide by Banggood (GIFTED)
ฝัง
- เผยแพร่เมื่อ 2 ส.ค. 2024
- Banggood sent me this ENJOYWOOD Precision Multi-Angle Drill Guide to try out, for the money it is an excellent addition to any workshop.
www.banggood.com/custlink/vmm...
Offer Price $85.99
0:00 - What is included with ENJOYWOOD Precision Multi-Angle Drill Guide
2 :20 -- Putting the ENJOYWOOD Precision Multi-Angle Drill Guide together
4:40 - Drilling holes with a drill press
5:15- Keeping the drill square to the workpiece.
7:50 -Drilling dowels with a drill press
8:40 - Drilling holes for locks and handles
11:30 - Drilling angled holes perfectly
13:40 - How to drill and insert threaded inserts
Content creation is thirsty work, why not buy us a coffee.
www.buymeacoffee.com/smalllof...
Or Join us on Patreon
patreon.com/SmallBarnWorkshop
Regards
JP - แนวปฏิบัติและการใช้ชีวิต
There I was only 30 mins ago scrolling through Banggood and AliExpress admiring what appears to look like some good quality well engineered precision tools and then this video pops up 👍 it's sometimes easy to over look or dismiss Chinese brands but actually can be very good.
Hi 101. I’ve bought clamps from there and now had two tools sent, they have all been well built. Regards JP
🎉just GOT this. Its pretty nice. - it works.
I bought this tool - works well. Pretty sure the 2 other white plastic bushings go in the ends of the steel handles so that you don't mar the side of the guide when you tighten them into place - there are little insets in the steel that they fit into perfectly. Just my opinion.
HI. Thanks for the info :-) Regards JP
One of those tools, when you need it, its worth its weight in gold. Two things I was missing was some good options to clamp it down. You could fix some T-Tracks to those corner holes. Also missing is the option to attach it to a saw track to be able to drill a set of holes in a straight line. Can also be done with a jig but for €80 I would prefer more fixing options rather than using one of the motorbike handles. Here it would be great if one of those horseshoe stops could fix to a saw track.
Hi Gary. A track mounting would be a brilliant idea 💡 Regard JP
Should have watched to the end before commenting! I have used a Wolfcraft version to put in a mortice lock in a door. Worked great.
I think those stops are great for fitting locks / latches etc... Regards JP
There are some cracking tools on Banggood. There is some absolute tosh on there too. I am hearing good stuff about compression router bits from them.
Morning Paul. I will look out for those, I have some points to redeem. Regards JP
Weird coincidence! I have just watched another ‘Toober discussing things they regretted buying and one of those was a drill guide/stand… 👀
Granted, it was nowhere near as competent and flexible as the Banggood one you were demonstrating, which looks a quality piece too… 👍🏻
One of those tools that is fabulous when you need it. Regards JP
The one I received had a .04" difference in width between the top and bottom of the posts so it will barely go down half way. Lots of oil made no difference. DOA
That's annoying 😑 Regards JP
Those pins are centre finders
Hi Karl. :-) Regards JP
was looking to see if someone had posted already @ the two pins on bottom... definitely not for a "half hole"
@@arick_mnc 😊
How much play is in the chuck? I had one from milescraft and hated it because of the wobble on the chuck. i think the defliction at the end of a spade bit was 1 to 2 mm. ok for construction but not if you got it for precise work.
Certainly not a couple of mm but there is a little. Regards JP
Makes me regret buying the Rutlands version!
Hi Paul. More expensive? Regards JP
@@Smallbarnworkshop it was £96+7p&p so £103 total and it was discounted. It has no where near the functionality of Enjoy woods, and has some plastic components. However it looks to have longer travel.
Thanks Paul. always good to message tool against its competitors. Regards JP
@paulwren97 I agree Paul, I bought one about 18 months ago and I'm totally underwhelmed by it. It works, but as you say, none of the added value of the Enjoywood.
Are the half hole guides actually centre finder stops?
Should have watched it all before commenting!
Sorry John, I did set you up :-)
I bought it for about $100, it's junk, when you push down on it it get stuck. No solution for it, couldn't make one cut with it, and the brass inserts keep.coming off, banggood is not responding about it either 😄
say the price sean ireland
This should take you to the page and price. Regards JP www.banggood.com/custlink/vmmHMB7Zb7
I was one of those shouting at you to say those short pins are for centring on a narrower edge😂😂 I’m assuming if you mark for a hole on the board then when it’s set at an angle the bit lines up to the mark. I’ve probably made a right bollocks of describing that🫣😜
Hi Doug. 😂 I think I know what you mean 👍🏻 Regards JP