USB & Li-ion Upgrading dead Black & Decker Screwdriver - 892
ฝัง
- เผยแพร่เมื่อ 17 ก.ย. 2024
- Also this Black and Decker Screwdriver, has been dead for years, but i have kept it,, and it just happens to be that it is 3,6volt,,just like all the Li-ion 18650 cells,,so i fix it with two "new" used cells. And also added a Mini USB charging circuit.
[Affiliate Links]
Micro USB - 5pcs TP-4056 1A Lithium Battery Charging Module : amzn.to/2pi2oZR
USB-C - 5pcs TP-4056 1A Lithium Battery Charging Module : amzn.to/2PDTiRX
Link to Black & Decker3.6-Volt Ni-Cad Screwdriver :amzn.to/1IjEf82 - They do not seem to sell this anymore.
Link to Black & Decker 3.6-Volt Li-ion Screwdriver : amzn.to/1QEVwLr
_________________________________________________________________
/ myplayhouse
Even just 1$ a month, comes out to the same as Binge-watching like 400+ of me Videos every month.
My PlayHouse is a channel where i will show, what i am working on. I have this house, it is 168 Square Meters / 1808.3ft² and it is full, of half-finished projects.
I love working with heating, insulation, Servers, computers, Datacenter, green power, alternative energy, solar, wind and more. It all costs, but I'm trying to get the most out of my money, and my time.
![[FULL EP.16] เซียนพาลุย "เผือก-ฟรอยด์" กรี๊ดลั่น จนปูหนี | เฮ็ดอย่างเซียนหรั่ง | One Playground](http://i.ytimg.com/vi/FsqUvwS3b-Y/mqdefault.jpg)
I have same screwdriver and will definitely use your experience to make same upgrade!
Thanks.
Best of luck with the upgrade :-)
Very nice.
You need over-discharge protection circuit too.
Hi Shahram Yousefi
Thank You very much! That will be when the Screwdriver becomes to weak.
Thank you for watching! :-)
@@MyPlayHouse No, it will not become weak, but it is necessary from the battery protection circuit, because without it the battery will die and perhaps from the first use
Love the video. You are very entertaining! Good job on the conversion.
This is great because I just "found" my old one and was going to recycle it. However, now I can rebuild it and put it back in rotation. Thanks.
If nothing else, it's a fun little projekt.. :-)
Nice project!! Did this to my Black & Decker Screwdriver - 892, works great! Thank you for the tip!
Hi Mattias Lindgren
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
Haha :) Once I made the same kind of mistake with hot glue in the USB conector.
Charging board you used has no battery protection circuit. I will not prevent under charging or overloading for example. The other one you have got has this feature, hence extra chip and connectors on the USB type C one. Plus and Minus connectors beside USB socket can be used instead of USB, so you didn't really need to dremel out that hole. You could just drill a little hole to see your favourite blue LED. It was fun to watch, thanks :)
Hi Mickey Rourke
Thank You very much! I did not want to restrict the power,, and I will charge it, when it feels week.
Thank you for watching! :-)
21:10 i made the same mistake some time ago anyway this mod is brilliant :-)
Hi MVVblog
Thank You very much! I am honest enough to admit when I have been a stupid F** ,, and it is usually rather entertaining.
Thank you for watching! :-)
Nice project. One should be double the endurance of a bosch ixo since it has two batteries.
Hi Philip Kaiser
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
I have 2 newer versions of Black & Decker electric screwdrivers, that are already on LI Ion and a Bosch ixo 4 electric screwdriver an older version, one of the first versions with LI Ion power supply, and they are super ok for activities that require low speed and torque .
Thisfirst one was to cool to just throw out,, so I ninja hacked it,, I do not use it much,, but now it holds power from use to use...
@@MyPlayHouse Well, I also don't use mine often either, in fact, I use them quite rarely, from time to time when I have something to do that requires their special talent :), otherwise, I use various drills drivers but depends on the situation.
You could have soldered the dc plug to the circuit board input instead of using the usb. You could still solder the dc plug to the board and have to two ways to charge it.
Hi Scott Downey
Thank You very much! Yes I mentioned that at the end,, just making an external USB to Li-ion charger :-)
Thank you for watching! :-)
@@MyPlayHouse I think Scott meant that you would wire the DC in jack to the Input +/- of the module (that's what those solder pads you didn't understand were for). The TP4056 linear charging IC used on those modules can tolerate up to 8V input, so wiring to the DC jack with the module likely would have let you use the original charger for the power tool, as it would have cut-off current at 4.2v for you regardless of DC input used (up to ~8V)
@@nickldominator The original charger has AC output and then there is a diode inside the wiring.
Those Nickel batteries are wired in, and sometimes can be upgraded to Lithium, but I just put a small wire-leg resistor/cap/diode unit on it, and the SAME BATTERY lets it keep the charge…
Hi StepCorn Grumbleteats
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
instructions by Gru on how to be an inventive supervillain!
Humm "making tools for bad guys"..
@@MyPlayHouse
I apparently forgot to like the video yesterday but I very much enjoyed it, especially the fact that you included your mistakes and most diy videos don't.
My earlier comment was about your accent, it reminds me of Gru from "dispicable me"
Great content, thank you!
I suppose that you could reduce the connector damage risk by piling a bit of hot glue on top of it...
Hi Johnnie Hougaard Nielsen
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
nice work
but you can easily the old charging circuit if its feed the same volt or near its tested and work
Hi salem abuomar
Thank You very much! But the problem is that if the voltages is just 200mV over 4,2volt,, bat things can be the result :-/
Thank you for watching! :-)
FOR YEARS i HAD A cordless screwdriver, battery failed so I soddered 2 wires to terminals and added connectors and simply had to put small 6 volt battery in my pocket to run it.
That is a fun hack,,
USB-C can charge at 9v and 5v, that's why the extra chips on the board.
Unfortunately, that isn't what they are for.
What you are talking about is the USB-PD spec, which those extra ICs do NOT do. The extra chips are a DW01 chip for over-discharge, over-charge, and over-current protection of the Lithium battery. The other extra chip is the FET controlled by the DW01 to switch on/off the load in the event of a fault condition mentioned above.
The USB-C connector on there doesn't do anything special besides simply being a superior connector :)
Hi Ein Felder
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
very nice project, if you used bms 1s wats the diferent with the charging module
It just helps with the charging,, so USB can be used. Thank You!
Why not replace the old batteries with loke for like new ones?
Li-ion is just so much better,,, they hold power,,, for years!
Smashing upgrade :-D
I think people warn you about correct Li-ion charging because they don't want to see you hurt.
And some like a good moan he he :-D
And that is why we leave moms food and laundry services,, to add some distances to the whining.. :-)
could not we just wire the batteries like the retail ones but have the charging pcb charge it externally through the socket that the normal adapter uses?
The original batteries are only 1,2volt each,, so they need to go in series to get up to 3,6Volt,, whereas the 18650 Li-ion cells are 3,6volt and therefor I put those to in parallel.
@@MyPlayHouse that fact prevents us from charging the batteries through the original socket ?(where we plugged the adapter before, we plug to the charging pcb's input)
This is really helpful and has reversed my decision to throw away my B&D HP9048 Type 1 which is still like new but flat as a pancake. It is a 4.8 volt screwdriver so as I'm no electrician could you advise what the best batteries and charging circuits I should use when I upgrade it? Ideally I would like to use a USB charger as you do. Thanks.
Hi Yadmaster CS
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
Bateria 18650 y un modulo BMS de 01S o 02S
I bought 2 of 14500 cells with BMS (to replace 3AA Nicd cells) and it doesn't work. What confused me is the model I have has a built-in flashlight and the flashlight works well D: But not the motor!
I then use a multimeter to check what happens and the result blows my mind. IT WORKS! WITH THE 10A MODE CONNECTED! WTH!?
uh... I have no idea how to use a cordless screwdriver with that multimeter's attached to it all the time...
:-) that is some mystery you have on your hand.
Is it possible to power the screwdriver with one 18650 since it can supply 3.7v? I'm trying to do it with a tray / battery holder and new a 3d printed end cap.
Yes that is posable,, It want have the same power,, but should turn :-)
I have the LI2000 model with a dead battery. It has a single cell in it, and I'm not sure if there's anything different about it such that it would warrant a different kind of replacement.After taking it, there's no labeling on the paper around the cell to identify it. Thoughts?
Hi Paul Sieberth
I would check the cell first,, if it is under charged,, it might stop working and the elektronikk might prevent it from working as long as it is under charged. Put a slow charge on the cell 100mA 4volt and see.. glad you liked the video :-)
Thank you for watching! :-)
Hello, in case you have the Black&Decker Screwdriver model KC4815, could you please provide the connections of the internal cables? Thanks a lot in advance.
I only have the ones I showed :-/ sorry
it's two 18650 batteries connected in parallel?
After the modification, can I still use the original charger to charge it directly? Is it safe to do so?
Yes in parallel.
@@MyPlayHouse
Awesome!
Can I use the original charger to charge the 18650 battery?
If not, could you show me how? I'm not really savvy with electronics.
in - and in + is only used id you use a 5 volt power suplly its just fore soldering
Hi Jessy Terpoorten
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
What are the better websites to find replacement batteries for a decent price if I'm not going to buy a large quantity? Are there any alternative places one should be looking for batteries as well?
Ebay,, or amazon,, everything over 3800mah is usually BS in 18650 cells.
Don't you need some fuses for those big banks of li-ions? If one cell goes fire then the whole basement could go fire?
Hi One Cosmic
Thank You very much! I am instelling fuses on each cell :-)
Thank you for watching! :-)
I wonder why do they set up the battery like this? The battery set up is permanent and not easy to replace for ordinary people. Black and screwdriver just grounded and i had to dump it because i couldn’t replace its battery 🥲
They would like to sell you a new one,, when this one gives up..
Hi, I did the same and have same model Black and Decker but it didn't work. I lost 3 modules already. I have no idea what is the cause of the damage. I connected all wires by given instructions. Small chip heated up and stopped working and no blue light turned on again.
This is a simple fix,, I am sure you will figure it out.
El modulo es solo para una bateria 18650, cuando conectas 02 en paralelo el modulo se recalienta, busca un modulo para 02 18650
I have a old one of these I don’t no where I put it. I also have a old robot vacuum that has a ni-CD battery and it’s battery died😡 love this video and are you doing something for movember like the moustache 🤗
Hi MOWER FACTS
Thank You very much! I have a Irobot video comming where I find a NI-CA battery,, and Don't mess with it, just replaced it.
No I am not doing movember,, sorry.
Thank you for watching! :-)
Helloo! What is the problem if I put the TP4056 WITHOUT protection? What are the advantages of putting the one with protection? Thanks u very much!
Well read what protection it supplies, and see if you need that.
@@MyPlayHouse ok, thanks, but I wanted to know if with this TP4056 the battery can exploit or it's safe. Best regards!
great, i have this one, will try this. i also have some realy old non workable 20v conrad screwdriver, which i would like to fresh it up with li-ons or something. some tutorial on something like that?
Hi izoyt
Thank You very much! good luck with your projekts :-)
Thank you for watching! :-)
Why did you not buy the TP4056 with protection circuit ?
This was more suitable for this project.
While buying one with a DW01 protection IC would have been better, It's unlikely the FET controlled by the DW01 would handle the large spike in current draw from the motor, and also the DW01 is likely configured to cut load at no more than an amp or two anyways.
Hi Geert Pirens
Thank You very much! This was with the TP4056, it hase some protection :-)
Thank you for watching! :-)
@@MyPlayHouse the TP4056 IC contains contains no protection for short or OD. The board you used only provides charging, no real protection.
@@nickldominator It's true. i tried today with protection circuit and it burns the board as soon as you press the power button. Led's won't turn on anymore. So i made the same as in the video. Only using battery terminals and hoping to charge it before battery is discharged too much.
Nice job.
Can you suggest a Li-ion battery for my Black and Decker KC-36 ?
18650 is pretty big to fit in.
Thanks in advance
Sorry I do not know that model.
@@MyPlayHouse Is the same model of tihs.
There is no acid in lithium based batteries
Even though there is no metallic lithium inside, water would cause lithium to catch fire.
The electrolyte is alcohol based and most modern lithium batteries have no other substances in them just cathode material, anode material, separator and alcohol. Electrolyte is created with lithium and it does happen by itself.
Hi WizardNumberNext
Thank You very much! there is a sweet smell to it when they leake :-)
Thank you for watching! :-)
Hello
This project is great!
What happens if I use batteries with 7800 mah ?
Here only I can get 1800 mAh or 7800 mAh Thank you!
If you are using 18650 cells 3700mah is max,, everything over that is Chinese wishful thinking :-) and you will be lucky to get 10-20% of what they promise. But you can put any 18650 cells in... and better batteries gives better performances.
Saludos tengo un screwdriver 3,6 volt. Cordless Craftman. Me podrías decir la capacidad de las baterías que debo sustituir y la cantidad de ellas. Y el cargador viejo que traía el screwdriver no se puede usar con estas nuevas baterías. No hablo mucho inglés si me puede ayudar seria excelente para recuperar mi screwdriver. Gracias
HI Alejandro Grumas
My channel is English, and to make sure as many as possible, can also enjoy the comments, they are also English.
Please keep to English.
Thank you for watching! :-)
Mortim whatever time it is (in the video) this time is to thank you.Did I hear you say something about Horrible People out there? .? No DAM
Hi william Logan
Thank You very much! I do not remember talking about horrible people,,, it's mostly just whiny bitches :-)
Thank you for watching! :-)
How long does it take to fully charge? I'm thinking of putting a circuit on each battery
My best estimate is about 5 hours.
Can you post the link for the battery you used? I'm having a hard time finding a reputable seller. Thanks
I used some old used ones, that came out of laptops :-)
This works great
It still works,, and I have only charged the old one two times and this newer one once. They do not leak as the old batteries.
¿El cargador que viene con el atornillador no sirve para esas baterías?
HI @avelinolois1442
My channel is English, and to make sure as many as possible, can also enjoy the comments, they are also English.
Please keep to English.
Thank you for watching! :-)
@@MyPlayHouseI have very little knowledge of it, sorry, I won't bother you. greetings
El cargador de qué voltaje es, desde COLOMBIA
HI David Villafañe
My channel is English, and to make sure as many as possible, can also enjoy the comments, they are also English.
Please keep to English.
Thank you for watching! :-)
Man! All those batteries.. Are you building a bomb? 👳♂️😝
Have you ever heard of a battery bomb ? that are not used for that.
@@MyPlayHouse yes, my cousin Omar he used to make battery bombs, he lost his job in a work-related accident, it was at that point when he discovered that ISIS health insurance does not cover dental 😝😝😝
i thought the discharge circuit should be solder at in+ and in-
Discharge,, that is the wrong one,, but yes plus to plus and minus to minus.
Will this also work with protected 16850's?
I believe so,, they are a tiny bit longer,, so a little harder to fit..
Where can I buy batteries for this screwdriver?
18650s are available everywhere.
No BMS to protect against undervoltage or overcurrent? Doesn't seem like a good idea.
Hi John Smith
when the screwdriver runs slow,, charge it.
Thank you for watching! :-)
There is a bms on the usb charging port. If the batteries are over discharged, no matter - Morten has 10,000 or so spares lying around........
@@einfelder8262 The IC on the USB charging module only controls charging, it doesn't control discharging.
@@Felipe2077tv Where did I say it does that? I merely said that if the batteries are destroyed by overdischarging he has plenty of spares lying around.
What is the motor number of the screw driver?
Sorry I do not know.
new vid!
Hi Chris
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
If those batteries under the Stairs would catch fire (many reasons, even if they are discharged ) ohh Lord...
What a stupid comment! I am a million times more likely, to get internal brain bleeding, from slamming my head down my table, from this, brain dead comment. Then those 18650 to just catching on fire.
Arme un taldro destorniar pero ahora no lo supe almar y ahora no le sirve el rache dond le dan velocidades me puede ayudar por favor.para saber como.lo arma
Please only english on my channel.
Why use hot glue and not epoxy?
I had hot glue,, did not have epoxy... that simple :-)
Yep, simple answers for simple questions. :-)
18650 the low you can get at piece is about 2,5 euro if i see well you have about 3000 batterys or more omg
Hi BEAT THE GAME
Old laptop batteries..
Thank you for watching! :-)
Hola amigo tengo un problema con un taladro de esto blackan deke lo desarme pero no lo pude arnar solo el problema que tube es no me fumciona el lado dond estan los numero
HI Gender Martinez
My channel is English, and to make sure as many as possible, can also enjoy the comments, they are also English.
Please keep to English.
Thank you for watching! :-)
2x 3.7 volts is 7.2
I have them in parallel, not in series.
I think you’re suitably screwed ;) Thanks for reading!
Hi Richard T
Thank you for watching! :-)
In fact I sed 1 battery instead
I put in two 18650´s in parallels,, for the more power.
The background music is not good :-/ better without :-)
Hi Alexander Schulz
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
Hola me puedes soy de barranquilla
Please only english on my channel.