My pleasure, I found you at the time of watching Nick Nimmin’s viedeo. I simply hit your channel and explore your lovely videos. I’m also a you tuber and a you tube education consultant myself. Anyway, a perfect review with knowledgeable information. Man I like it. Thanks.
Very cool little setup there. I'm looking into a new system as well hearing you talk about your new rig. Can't wait to see what you have in store. Cheers!
Cool! I wanted a really compact small system that I could do 5 gallon batches with. The system looks to be really quick, minimal clean up and should be a nice system. The time it takes to heat the water for strike and to get the boils crazy fast with the system! Stay tuned! 👍🍻
Looking forward to seeing the details of your new brewery. Where did you get that element enclosure? I m in the process of building my electric brewery right now, and have not settled on an element enclosure yet.
The element is a twist lock. And I am using an extension to get it to fit in the kettle. Links are in the description for the element and some other items used. Cheers James!! 👍🍻
Short Circuited Brewers how did you go about insulating your kettle? I have the same one and running dual 1650W elements with a 120v eBIAB setup. Would love to give my mash element a break during mashing.
I used a sheet of neoprene. I got off of Amazon. XCEL 54"in. Wide x 1'ft. Length x 1/4" Thick Soft/Medium Neoprene Sponge Foam Rubber Sheets for Cosplay Armor, DIY Projects, and Gaskets www.amazon.com/dp/B01JSWJTNY/ref=cm_sw_r_cp_apa_DWhZAb3YW1GHC
It does expand when it gets warm. I used these Velcro straps to keep it as tight as possible. UGREEN Cable Ties Reusable Cable Straps Hook and Loop Cord Ties Fasteners for HDMI Cable, Lightning Cable, Power Cable, Audio Cable, Headphone Cable, Wire Management and Organizer Black (15 FT) www.amazon.com/dp/B01N5NKVVK/ref=cm_sw_r_cp_apa_9ZhZAbDR350N8 I also have a 1650 element for this kettle that I will use with the inkbird IPB-16 controller. For a 120 volt option with this same kettle setup. Cheers Zach! 👍🍻
Jacob, let time I talked to them a month or do ago. They had so many orders from a wholesale source they have not been able to fulfill any retail orders. Are you able to diy a controller kit?
My pleasure, I found you at the time of watching Nick Nimmin’s viedeo. I simply hit your channel and explore your lovely videos. I’m also a you tuber and a you tube education consultant myself. Anyway, a perfect review with knowledgeable information. Man I like it. Thanks.
Thanks Tom! Appreciate it. I'll have to check out your channel. 👍🍻
Very cool little setup there. I'm looking into a new system as well hearing you talk about your new rig. Can't wait to see what you have in store. Cheers!
Cool! I wanted a really compact small system that I could do 5 gallon batches with. The system looks to be really quick, minimal clean up and should be a nice system. The time it takes to heat the water for strike and to get the boils crazy fast with the system! Stay tuned! 👍🍻
Using 240 for brewing is a time saver for sure. Cheers!
Much faster than 120v for sure. Cheers! 👍🍻
I'm looking forward to seeing your new system and how you built it.
Thanks!! Hope to get it completed soon! Should be a fun system to new on! 👍🍻
Cheers Brian, good review looking forward to seeing yours completed
Thanks Craig! It should be one fast brewing rig! 👍🍻
great video Brian as always. ill be posting mine this week on my new system! Cheers
Awesome! i will keep my eyes peeled.. Cheers! 👍🍻
That's the same 4 pin plug as my sensors have, Nice compact brew panel.
OK most of the ones over here are the 3 pin. Cheers Clive!! 👍🍻
Looking forward to seeing the details of your new brewery. Where did you get that element enclosure? I m in the process of building my electric brewery right now, and have not settled on an element enclosure yet.
The element is a twist lock. And I am using an extension to get it to fit in the kettle. Links are in the description for the element and some other items used. Cheers James!! 👍🍻
Short Circuited Brewers how did you go about insulating your kettle? I have the same one and running dual 1650W elements with a 120v eBIAB setup. Would love to give my mash element a break during mashing.
I used a sheet of neoprene. I got off of Amazon. XCEL 54"in. Wide x 1'ft. Length x 1/4" Thick Soft/Medium Neoprene Sponge Foam Rubber Sheets for Cosplay Armor, DIY Projects, and Gaskets www.amazon.com/dp/B01JSWJTNY/ref=cm_sw_r_cp_apa_DWhZAb3YW1GHC
It does expand when it gets warm. I used these Velcro straps to keep it as tight as possible. UGREEN Cable Ties Reusable Cable Straps Hook and Loop Cord Ties Fasteners for HDMI Cable, Lightning Cable, Power Cable, Audio Cable, Headphone Cable, Wire Management and Organizer Black (15 FT) www.amazon.com/dp/B01N5NKVVK/ref=cm_sw_r_cp_apa_9ZhZAbDR350N8 I also have a 1650 element for this kettle that I will use with the inkbird IPB-16 controller. For a 120 volt option with this same kettle setup. Cheers Zach! 👍🍻
Do you know if these guys are still in business everything on their website looks sold out was interested in the controller and went to check it out?
Jacob, let time I talked to them a month or do ago. They had so many orders from a wholesale source they have not been able to fulfill any retail orders. Are you able to diy a controller kit?
@@ShortCircuitedBrewers yeah I have also been looking at the biab kit from ebrewsupply
Ok that's what I was going to recommend. I have one of those kits and will be doing a tutorial on the build in the near future.
@@ShortCircuitedBrewers Awesome I will stay tuned for that
What did you use for insulation?
XCEL 54"in. Wide x 1'ft. Length x 1/4" Thick Soft/Medium Neoprene Sponge Foam Rubber Sheets for Cosplay Armor, DIY Projects, and Gaskets www.amazon.com/dp/B01JSWJTNY/ref=cm_sw_r_cp_apa_DWhZAb3YW1GHC
How many takes did you need for the temp probe ? :D
LOL!! 2 actually! That is one heck of a mouthful!! Cheers! 👍🍻
Clicked your link to the panel on their site. Price was $475. Refreshed the page a few minutes later, and it's already jumped to $500.
Thanks for the heads up. I am in contact with them to find out about it.
It is fixed.. They were doing some updates to the description and the default options changed the price. it is back to the original price now.