Felder; beautiful machines, intend to set up a shop and once have the money there will gladly be writing them a large cheque. As far as modern companies go, one of the few that are respectable.
What a corker top notch addition. 👍 Seriously needed in your shop, mate, saving you oodles of time all around. So much quicker and no mess, no fuss! Sweet as👌
Felder is a very good brand, we also have a wide belt sander format4 that can sand 1300 mm in terms of width top machine and also satisfies us well. Nice video good explanation keep it up.
If you are a small shop trying to do boards that wide you more than likely are going to need to do them by hand and that is exactly what I used to have to do. To make it easier you could use an powered hand plane from the likes of Mafell or Festool or dewalt. You can mix and match on this process between manual and powered hand plane.
Just out of interest, and I know it’s dependent on width of the wood etc, how many passes are the sandpaper sheets good for before you have to change them?
Justcruisin109 Go to Felder website and find out what the power capabilities of the machine. If it only gives watts you can use that to figure out current requirements of the system.
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.15 (2/4)](http://i.ytimg.com/vi/qbHbshrA1f0/mqdefault.jpg)
![[안방1열 풀캠4K] 베이비몬스터 'DRIP' (BABYMONSTER FullCam)│@SBS Inkigayo 241110](http://i.ytimg.com/vi/AQ4RIghEvUs/mqdefault.jpg)
hate to say it but abcon joints are not the best they used to be a company just abrasives i will try to find there number tomorrow did a better paper.
Ok let use all know :)!!
Thanks for this 👍. Makes total sense because a router table fills my garage with sawdust! Im gonna buy one soon.
What a difference money makes hey!! Fair play to you mate!
Great video, now I have to add a wide belt sander to my workshop! Keep up the good work - thanks!
Felder; beautiful machines, intend to set up a shop and once have the money there will gladly be writing them a large cheque. As far as modern companies go, one of the few that are respectable.
What a corker top notch addition. 👍
Seriously needed in your shop, mate, saving you oodles of time all around.
So much quicker and no mess, no fuss! Sweet as👌
Great machine, what a difference in time & mess! I have had great luck with SIA sandpaper for my whole shop. Thanks
Cool bit of kit 👍
Felder is a very good brand, we also have a wide belt sander format4 that can sand 1300 mm in terms of width top machine and also satisfies us well. Nice video good explanation keep it up.
Brilliant Mate , a bit of à problem with wood that are pitch heavy , like BC Fir , and Pine. Thx 🇨🇦👍🏻
Magnificent machinery! For the small shop it just isn't an option though. But this is your livelihood so machinery = time= productivity!
If you are a small shop trying to do boards that wide you more than likely are going to need to do them by hand and that is exactly what I used to have to do. To make it easier you could use an powered hand plane from the likes of Mafell or Festool or dewalt.
You can mix and match on this process between manual and powered hand plane.
what type of pneumatic compressor are you using togheter with the sander? also what type of dust collection would be very much appreciated..
thank you
Thanks Andy my mate uses Mirka sandpaper for his sander so i will tell him about this to see if any cheaper
works out around £14 a sheet !
Wow, nice machine.
that looks so easy, even I could do it...Axminster has shot themselves up the backside!
What do you mean?
A real game changer.
👍🏻 super Felder!
Loving the channel mate👍
Cheers Mate!!
Nice bit of kit. Seems to do job too.
I am so confused... if its a fix bed than the sanding drums must rise and fall but I didn't see that happen wtf?
Do you have any hesitation around putting an epoxy board through this?
What model and width is that machine? Cost?
Just out of interest, and I know it’s dependent on width of the wood etc, how many passes are the sandpaper sheets good for before you have to change them?
40 grit last for ages not 100% sure just how many I have another video uploading to so many passes and can see any wear at all
Where did you get your lift table very nice
RUWI and Felder sell them I have both :)
Have a look if the fancy I have a couple of old videos on the them both
Great vid, whats the price on this please ???? thank you....
Not sure new, bought mine used from Germany
One side must be flat to put wood into sander?
Depends I have flatted slab on TH-cam with just belt and drum sander have a look
@@ManorWood I'll check
What width does that machine sand
950mm
Great machine - I know it’s 415V but out of interest, how many amps does it draw? I only have a 20A supply but expect this is at least 32A. Cheers
I think around 20 max . you can see the Amp meter on the front panel its using 5/8 most of the time its one of the lowest out there.
Justcruisin109
Go to Felder website and find out what the power capabilities of the machine. If it only gives watts you can use that to figure out current requirements of the system.
刚看了下这款砂光机的价格，真的是壕无人性啊
i bought this one 2nd hand was a very god price less than 1/2 :)
Manor Wood oh that’s much better😁
Зебс машина!
So jealous.
Great to see it. I did it too. The plans from Woodglut helped me a lot :)
What model Felder wide belt sander?