Modifying the band-edges on the Icom IC-7300

In this next ML&S 'Helpful-Hints' video, Steve Venner (G0TAN) shows how easy it is to modify the band-edge settings on the Icom IC-7300.
He also shows how to change the edge setting of the fixed spectrum scope, and hence how to modify it to show the 5 MHz band.
Finally, he describes the issue with the band edges should you decide to have the radio wide-banded.
Find out more about this product here:
www.hamradio.co.uk/amateur-ra...
Ham Radio Store: www.hamradio.co.uk/
Like us on Facebook: / hamradiouk
Follow us on Twitter: @HamRadioUK / hamradiouk

[@luis.s.martin]

Very good info. Much appreciated. Thank you!!

[@HamDX2LVG]

Very nicely explained. Thank you!

[@floridasaltlife]

Great video, I keep coming back for a refresher on this !!

[@johncliff5417]

Very well presented. Thank you, that was perfectly clear how to preform the settings.

[@BenSwayne]

Excellent demonstration! Answered all my questions. The band edge programming would be great for those in the USA with various classes of licenses gaining portions of band privileges. But also the demo of enforcing band edges even with a mars mod is great too. Looks like a great little radio...

[@looneytune-upelectronicsll2241]

That looks like an awesome radio. I hope to buy one this year.

[@shamadevi7022]

Very informative. Thank you.

[@donhody1127]

Great help. Thank you. I was wondering why my 10 metres did not show fully on the scope edges. Checking out the fixed edges in the scope I could see the reason.

[@johncliff5417]

Thank's .You made that look so easy, witch I suppose it is once one becomes familiar with the settings. 73 de G0WXU - John

[@falcon16czz]

Thank You, 73's From KD0FDF

[@russellnitro5007]

Yes was very useful thank you

[@DesignAlign]

Great vid thx. Very informative.

[@dgr3756]

Great Vid Steve..Got my new IC-7300 coming today!!...Thanks again for the tutorial, 73's Dave, k3dgr

[@dannyjensen4954]

Thanks

[@daveherron]

Thank you for this information. I couldnt figure it out. Im sure its in the manual but who reads those? :)

[@Coalrollinfurry]

Icom will tx on a portion of the sw broadcast band. About half way thru it will loose all power but still say its tx. More experience with the 7300.

[@DollarbillDollarbill]

Better than removing diode. Of course you can flick the diode off also. Also software. Most rigs have this somewhere somehow. Have 5 radios and all but the one I use goes anywhere on any mode. There is a point on radios where you should stop.There all different. Taking a radio and butchering it like a cobra 148 is going way to far.