The two sides in the opposite direction are both supplies( Ac/dc or Ac/Ac ) and the other side is use as the Load to the panel when it's used as a changeover switch.
You are better off using a winch relay setup to run the hoist. The repeated up and down will wear out the contacts. These are not meant to be used as on off switches. They are mean to change over power from one set of contacts to the other every once and awhile. Like if one set of batteries are dead and you switch to the back up batteries. Winch relay setups are made for the faster, repeated in and out if hoists and winches.
The two sides in the opposite direction are both supplies( Ac/dc or Ac/Ac ) and the other side is use as the Load to the panel when it's used as a changeover switch.
Solid copper contacts or just plated?
FYI - these are AC not DC rated knife switches, careful because of arcing on high current applications, after a while these switches will weld shut.
Should be fine using it off load to switch between different items. thats what kills 90% of knife type isolators.
Bhai kya price ka h
Is there like a regular switch for this ?
can I use this to replace a simple push button on a circuit?
Depends. This swaps one supply to 2 loads or 2 supplies to a single load. It's a change over switch.
can i use this for electric chain hoist for forward and reverse?
Yes.. simply cross the end connections (the jaws of the switch)
You are better off using a winch relay setup to run the hoist. The repeated up and down will wear out the contacts. These are not meant to be used as on off switches. They are mean to change over power from one set of contacts to the other every once and awhile. Like if one set of batteries are dead and you switch to the back up batteries.
Winch relay setups are made for the faster, repeated in and out if hoists and winches.
No you use selector switch for reverse and forward
thanks
im trying to use this on a ebike for dual battery setup, i want to use the switch to change the battery? is it posiible? can you also help me?
Just swap the supply side for the load side and vice versa.
5,000 amps?
Are you for real??
How can I buy it
Just search dpdt knife switch in ebay. I only use ebay .co .uk so doesnt show listings available in other countries.