I was keep trying your method for rubber plant leaf propagation..finally i got success.. thanks to share such types of videos...... Your comment is more valuable for me as u r expert in this area. I also started sharing my real experience with plant in my channel.....pls let me know improvement area....
I found a rubber tree thrown out I tried to save it but it died except one leaf. The leaf has been in a vase of water for over 30 days no roots but have three new buds growing so there is hope 🥰
hi.. if you want to propogate a rubber , you should include leaves+ stem.if you use only leaves to propogate it would have a roots but no leaf would grow from your propagated leaves
than what to do how to grow this plant I had tried but failed miserably. i had kept under the water but eventually all of them turned yellow only one had slight kind a root. how to grow this plant pls help?
Wow ang ganda ng Rubber plants ganyan pla magparami . Thanks for sharing. Naidikit na kita sa house ko . Sana ako din Always watching you here in South Korea
When I replant any plants to a bigger pot I take angle grinder and cut the pot in half then carefuly remove both pot parts and put the plant into the new bigger pot. So as little as possible roots are damaged. Plants love it and then they dont need that much recovery time after replanting. I have 4 Ficus Elastica plants in 30 liter pots. They are 1,2 - 1,5 meters tall growing outside on porch Manila city.
Hola.No se tu idioma.ahora si tú sabes español,lo vamos a entender,x que me gusta tú video.Ahora la pregunta ¿ Cuanta vece al mes la riega.Y cuanto se demoran en crecer la hoja en tierra?.Yo tengo del 25 de marzo una hoja que me regalaron y la puse en tierra,no se cuanto se demora en que salga otra hojita chiquita.Tu me puedes ayudar en en ese tema x favor.gracia y cariño
Hola. No sé si aún puedas ver este comentario. Pero, el autor/autora de este video dice que según alguna investigación previa sobre la reproducción de la ficus elástica una hoja puede producir raíces y vivir por años incluso pero no dará nuevos brotes qué produzcan hojas, permanecerá así hasta morir. Se debe incluir por lo menos la yema de donde se sostiene la hoja para que pueda producir un nuevo árbol.
Hey, apparently I too saw the same article on the internet. I too have just started my experiment in water. Will be eagerly Waiting for ur next upload and progress.
Just let your plant settle in for a few days, then repot it in a fresh soil mix. It is better to always repot your newly purchased plants into a freshly mix soil with full of nutrients. I recommend 50% potting soil + perlite or coco peat or sand + some compost.
I put a rubber plant leave in water. It has good roots now. Will it grow to a plant if I put it in soil? Or will it remain a single leave always even after having roots?
Were you ever able to obtain stems from the plants propagated from a single leaf? Would cutting the leaf horizontally allow for further offshooting at the root level?
You cannot produce new stem from just rooted leaf as per my experiment it just remain leaf with more roots for almost a year now. Regarding with cutting the leaves horizontally, I don’t have any knowledge about it. But I think, theres is no special wether you cut it or not.
I kept the plastic cover for 1 month but you can keep it until your cuttings successfully rooted. And also I watered my soil propagation when the soil is almost dry (moist).
pleasee give me some tips. i did the soil stem propogation exactly like yours, but i cover it with a clear plastic bag. the soil seems to be quite moist which is nice, but yesterday i noticed this white cotton thingy on the stems. i think its due to the high humidity. is it a bad thing? should i get rid of the white cotton thing? and there even is a mushroom growing next to it
When rubber leaves reproduce, roots appear, but stems come out and do not seem to become trees. I think it's a good way reproduce to cut a leaf with the stem.
Yes, rubber plant is capable of producing flowers and, subsequently, small fruits. ... Actual rubber plant blooms are small, greenish and insignificant; they also are unlikely to occur on a rubber plant growing indoors in a container or even one growing outdoors in warm temperate to semi-tropical conditions.
tried to propagate the leaves in water but all just died so did the stem with leaves when i opened the see thru plastic that i covered to the propagated stem with leaves in soil it had mold and eventually died too
I did a follow-up video about propagating using just the leaves and it won’t grow as a new plant. It may root well but will not become a new plant. When you propagate make sure there’s a stem. About propagating in soil, when you cover it with plastic make sure to have some air ventilation at least to prevent molds. Also, make sure that the soil is not too wet, just enough to moisten the soil. Overall, propagation in water is still the most effective for me, just make sure to keep your propagation in a place where it can receive enough indirect light and change the water once a week.
Sorry to tell that it won’t produce any new stem. It will remain leaf with roots. I tried this on my experiment and for almost a year it remain a leaf.
@@thegreenearth perfect that is what I thought. Happy I don’t need to try it. I have tried with other plants, some do great other not so much. the zz will create a new plant ❤️
I don’t understand what do you mean? Anyway better to propagate your cuttings in water as it gives me good result. Just make sure to place it in a bright sunny window and change the water at least once a week. Your cuttings should have stem because leaf alone cannot produce a new plant.
My soil proportion is 20% Sand is 80% will it help to produce root or I need to transfer it in water right now. And its October month will it work now.
Men oddiy NPK 20-20-20 o'g'itidan foydalanaman. Ammo menimcha, agar siz o'simlikni gullashni rag'batlantirmoqchi bo'lsangiz, yuqori fosforli o'g'itlardan foydalanishingiz mumkin.
I have put a stem of rubber plant in water. Do I need to change the water its been 1 month. Also some roots have come still they r not growing now and look unhealthy. The leaves of the plant are drying out
Heyy! I have a question. If you cut a branch off with a few leaves like you did, can you just propagate the whole thing instead of cutting it into pieces? Will it still shoot roots that way? Thanks!
@@kjetvl tap water, you dont need to add anything. Just put a branch in water and wait few weeks till you get nice roots and then you can transfer it to soil. I use any standard compost I can find in garden centre or in supermarket.
The roots on the potted cuttings grew crazy fast! By the way, did you water the cuttings that you put inside the plastic bag? Also, the way you tied the plastic bag is it airtight?
there’s no need of watering for a month and the plastic cover should not be close tight. but the way I did on the video initially is too tight and I think that was the reason why one of my propagated plant rotted.
Hi is it really true that new leaf will come from leaf propogation? Because it has been 2 months now of my soil propogation, root has came, leaf also looking fine but no new shoot came out. Can you please help on this?
Hi, yes I have also the same rooted leaf with almost 7 months now and still no new shoot. According to what I read on my research it won’t produce new plant and will die eventually.
@@vishalikongara8925 its ok if you torn your rubber plant leaf it will be still alive but you cannot save the leaf. If you want your rubber plant become bushy you can prune it so it will produce more shoot.
@@thegreenearth yeah..it will not stick back..thats what i wanted to know.. I will prune it and see.. thank you for quick response.. much appreciated.. have a great day ahead..
Can ı propagate with a fallen leaf? Should ı out it to water or plant in a soil? My ficus elastic has been shedding its leaf, ı keep putting them into water but ıt's not working?
I was keep trying your method for rubber plant leaf propagation..finally i got success.. thanks to share such types of videos...... Your comment is more valuable for me as u r expert in this area. I also started sharing my real experience with plant in my channel.....pls let me know improvement area....
Люблю фикусы, неприхотливы и быстро растут. Недавно сделала обрезку своему красавчику 🤗
I found a rubber tree thrown out I tried to save it but it died except one leaf. The leaf has been in a vase of water for over 30 days no roots but have three new buds growing so there is hope 🥰
Same here
Looks like TH-camr’s use some fertilisers to grow
hi.. if you want to propogate a rubber , you should include leaves+ stem.if you use only leaves to propogate it would have a roots but no leaf would grow from your propagated leaves
True
than what to do how to grow this plant I had tried but failed miserably. i had kept under the water but eventually all of them turned yellow only one had slight kind a root.
how to grow this plant pls help?
@@SushmitaJain depends on the season too. Propagation should be done in October, February and rainy seasons. Did you change the water after 4-5 days?
How much
Correct
Very nice pwede pala yan sa water at sa soil propagation ☺️
റബ്ബർ പ്ലാൻ്റ് te watering engineyanu
Ganda Ng Rubber Tree pinuputol pala Ang dulo.
شكرا لكم لهذه القناة المفيده هل يجب تبديل الماء عن الاوراق عند وضعها فيه لتجذر مع فائق،الشكر
wow sis puede pala i cut lang ang leaves mabubuhay na thank you for the tips ituro ko yan sa friend ko meron cya thank you were stay con na po!
Great video very interesting I love rubber tree.new friend herw
Wow ang ganda ng Rubber plants ganyan pla magparami . Thanks for sharing. Naidikit na kita sa house ko . Sana ako din Always watching you here in South Korea
Salamat po sa pag share ng idea.
Cutting Kis Month mein Lgani Chahiye ⁉️Rabber Plant ( Punjab ke Temperature Ke Hisab Se
Salah satu pohon yang aku suka, di sini orang menyebutnya beringin karet kebo pohon 🌳
Thanks teaching how to propagate rubber tree
Kaat Kr Lgate Sme 👉🏻
Cutting ke Nichle Bhaag Se Milk Na Htaye To Bhi Growth Karta Hai Kya ⁉️
When I replant any plants to a bigger pot I take angle grinder and cut the pot in half then carefuly remove both pot parts and put the plant into the new bigger pot. So as little as possible roots are damaged. Plants love it and then they dont need that much recovery time after replanting. I have 4 Ficus Elastica plants in 30 liter pots. They are 1,2 - 1,5 meters tall growing outside on porch Manila city.
Ye jo mitti me lagai he aapne cutting uski mitti kaisi banai he plz bataye ....iski soil me kya kya milaya jatahe & kitna ......
I’m using perlite 30% + any potting soil 70%
@@thegreenearth okkk
Agar perlite naa ho to chalega???
Hi cool i didn't know wow i am impressed. They actually die quickly. I didn't think they could be saved. Thank you very much.👍
Sa water propagation do you use purified water or tab water? Do we need to make the water to lost the clorine in the tab water?
The water propagation went very well. The soil is also okay, but the water has more roots.Thanks for sharing.
Ganda po ng mga rubber tree nyo, nanay ko po nagtanim ng ganyan pero namatay😒
😁
Wow so amazing propagation
Thanks sa pagshare ng pagpapadami ng rubber plant
Ask lang po kong anong gamot ang ilalagay sa tubig para mag ugat?
Wala po ako nilagay na kahit anu. basta palitan lang ang tubig at least once a week or kapag malabo malabo n cya.
this is great! can u make an update on the propagations?? :) i need to know before chop up my plant haha
Salamat po sa tutorial
Cuando lo tienes las hojas en agua ¿ Tú le cambias el agua ?
Do I need to apply fertilizer?
not necessary during propagation
Is that true, only leaves that propagate can have a roots for only 52 days,i will try,i like this,tnx for the tips
Hi Amalia, please take note that base on my research leaf propagation won’t produce new plant and it will just root for a very long time.
Brother which prefect time to grow cutting in rubber plant
Please suggest 🙏
during summer time. warm climate gives your cuttings to root faster.
Naglagay po ba kayo ng rooting hormone sa tubig?
hindi po
Hola.No se tu idioma.ahora si tú sabes español,lo vamos a entender,x que me gusta tú video.Ahora la pregunta ¿ Cuanta vece al mes la riega.Y cuanto se demoran en crecer la hoja en tierra?.Yo tengo del 25 de marzo una hoja que me regalaron y la puse en tierra,no se cuanto se demora en que salga otra hojita chiquita.Tu me puedes ayudar en en ese tema x favor.gracia y cariño
Hola. No sé si aún puedas ver este comentario. Pero, el autor/autora de este video dice que según alguna investigación previa sobre la reproducción de la ficus elástica una hoja puede producir raíces y vivir por años incluso pero no dará nuevos brotes qué produzcan hojas, permanecerá así hasta morir. Se debe incluir por lo menos la yema de donde se sostiene la hoja para que pueda producir un nuevo árbol.
did u use rooting hormones or is it ok to propagate the plants in just a soil? thanks
I want youre anwer
Hi.
Just watch your video, did you use rooting hormones for the cuttings?
No, I have not tried yet using rooting hormone.
@@thegreenearth thank you
Hey, apparently I too saw the same article on the internet. I too have just started my experiment in water. Will be eagerly Waiting for ur next upload and progress.
Thanks
Did you put anything in the water for the leaf propagation?
nothing, just tap water
Done watching 👀. Happiness in leaf 🍃 vlog
I have purchased rubber plant recently and it is in cocopeat. Do I need to replace it with soil or cocopeat is ok for rubber plant
Just let your plant settle in for a few days, then repot it in a fresh soil mix. It is better to always repot your newly purchased plants into a freshly mix soil with full of nutrients. I recommend 50% potting soil + perlite or coco peat or sand + some compost.
@@thegreenearth thank u
I put a rubber plant leave in water. It has good roots now. Will it grow to a plant if I put it in soil? Or will it remain a single leave always even after having roots?
Yes it will remain as a leaf and wont produce any stems.
مرحبه ياعمري ممكن اثبتي تعليقي فدوه العمرج 😘😘😘👍👍👍👍👍👍👍🙏🙏🙏🙏🙏🙏🙏
kta ya plant without sunlight survive Karnak tah hai
Were you ever able to obtain stems from the plants propagated from a single leaf? Would cutting the leaf horizontally allow for further offshooting at the root level?
You cannot produce new stem from just rooted leaf as per my experiment it just remain leaf with more roots for almost a year now. Regarding with cutting the leaves horizontally, I don’t have any knowledge about it. But I think, theres is no special wether you cut it or not.
Those 4 videos ate amazing, thanks bro. U have to make a vídeo with your indoor specific stuff please! Cheers from Argentina
I seen you just take out the leafs of rubber plant how come its 2 leafs now the pot...
look like tricky
Hi RoseBud, I put the timeline of how the plant grows. If you can notice there is a date on the upper left corner.
The Green Earth yes i notice when i finish the video thank you for sharing i will do it im mine
wow yesss the leafs are growing
thank you for sharing
👌👌👍
Good idea from
🇵🇭🇦🇺
Qpk
How long did you leave the plastic bags over? And how often do you water the plants in soil propagation?
I kept the plastic cover for 1 month but you can keep it until your cuttings successfully rooted. And also I watered my soil propagation when the soil is almost dry (moist).
@@thegreenearth thank you so much for this! Hope that my cuttings will grow healthy ☺️
Thank you for sharing brilliant tips for those gorgeous plants!happy gardening watching from Japan!😊💕🌿
Wow thnks for sharing your video gawin ko din yan
pleasee give me some tips. i did the soil stem propogation exactly like yours, but i cover it with a clear plastic bag. the soil seems to be quite moist which is nice, but yesterday i noticed this white cotton thingy on the stems. i think its due to the high humidity. is it a bad thing? should i get rid of the white cotton thing? and there even is a mushroom growing next to it
that is fungi, go this site and follow the instructions - www.thespruce.com/baking-soda-spray-on-houseplants-1902672
Simply amazing. New friend here. Have the most amazing day. See you on the next one.
Pwede ba ako bumili ng &magkano ?
FYI' hugs
I tried in water but all are died but i had 1 left rb leaf i think its still alive than water wanna ask what u use in water to see the roots?
I just used the normal water. Just change it once or twice a week. keep you propagation in warm area to promote rooting easily.
I shall be waiting for the next part on these new rubber plants
Ginawa ko nmn tunanim ko ang dahon sa tubig at meron din lupa pero nadeads nmn😔
very nice great content
I noticed that you put them (the mother plant) under grow lights, may i know how many hours do put them under it?
I kept them under grow light the whole day or you can kept for 12 hours a day.
@@thegreenearth thank you very much.
When rubber leaves reproduce, roots appear, but stems come out and do not seem to become trees. I think it's a good way reproduce to cut a leaf with the stem.
yes that is true
Will rubber plant produce flowers
Yes, rubber plant is capable of producing flowers and, subsequently, small fruits. ... Actual rubber plant blooms are small, greenish and insignificant; they also are unlikely to occur on a rubber plant growing indoors in a container or even one growing outdoors in warm temperate to semi-tropical conditions.
Tq
Can I use a mixture of perlite and Coco peat to grow roots in the leaves?
you can use that mix but not just the leaf, leaf without stem will not grow as new plant.
What is the appropriate potting mix for propagation rubber plant
Any potting mix that can drain well easily when watered. Add something to your normal potting soil like perlite or pumice stone.
Benim yaprak 6 aydır hiç çoğalmadı.Hep aynı mı kalacak??
tried to propagate the leaves in water but all just died so did the stem with leaves when i opened the see thru plastic that i covered to the propagated stem with leaves in soil it had mold and eventually died too
I did a follow-up video about propagating using just the leaves and it won’t grow as a new plant. It may root well but will not become a new plant. When you propagate make sure there’s a stem. About propagating in soil, when you cover it with plastic make sure to have some air ventilation at least to prevent molds. Also, make sure that the soil is not too wet, just enough to moisten the soil. Overall, propagation in water is still the most effective for me, just make sure to keep your propagation in a place where it can receive enough indirect light and change the water once a week.
Please share link of part two
Here th-cam.com/video/ipkTVKucZIw/w-d-xo.html
you can visit also to my channel to see all the videos.
Would they create a new plant just from the leaf ? I do see that they make roots easily but would it make a new plant or just stay one leaf?
Sorry to tell that it won’t produce any new stem. It will remain leaf with roots. I tried this on my experiment and for almost a year it remain a leaf.
@@thegreenearth perfect that is what I thought. Happy I don’t need to try it. I have tried with other plants, some do great other not so much. the zz will create a new plant ❤️
Yes not all plants wont. Jade plant also can produce new plant in just a leaf cutting.
If the leaf just stay like same n never produce any new leaf so what is the use of doing this, thankyou for saving my time from not doing this
Propagating can be done only in sand and incubation method for rubber plant.please help me because its first time I m trying.
I don’t understand what do you mean? Anyway better to propagate your cuttings in water as it gives me good result. Just make sure to place it in a bright sunny window and change the water at least once a week. Your cuttings should have stem because leaf alone cannot produce a new plant.
My soil proportion is 20%
Sand is 80% will it help to produce root or I need to transfer it in water right now.
And its October month will it work now.
@@thegreenearth means I have made a potting mix of sand 80% &soil 20% will it produce roots.its October will it work now.
Салом мани кора шахзодам усмай колди нима килишим керак маслахат беринг илтимос😢😢😢😢😢
Qora shahzoda guliga qanday oʻgʻitlar solinadi
Men oddiy NPK 20-20-20 o'g'itidan foydalanaman. Ammo menimcha, agar siz o'simlikni gullashni rag'batlantirmoqchi bo'lsangiz, yuqori fosforli o'g'itlardan foydalanishingiz mumkin.
San po pedi bumili ng pangpaugat at ang pinupunas sa pinutol n sanga
ok lang po ba na paghaluin ang complete mixed soil (with manure) & coco peat lang? maselan po ba ang rubber tree?
ok lang naman at healthy yang mix n yan for rubber plant.
How long does it take for roots to appear in the leaves placed in the cup of water?
In my case it takes 3-6 weeks
I try this progation hopefully it works..
What kind of soil to-be the best to use
You can use any normal potting soil and just add 20 percent perlite to avoid soil compaction and to keep plants aerated.
Awesome!!!! I’ve watched all parts and your information from your experiments are very helpful!
🤩
I have put a stem of rubber plant in water. Do I need to change the water its been 1 month. Also some roots have come still they r not growing now and look unhealthy. The leaves of the plant are drying out
change the water at least once a week
Very nice 👍
🍅 Another inspirational gardening video!! Keep up the good work.🥒🍅🍆🥔👍
Wow thank you for sharing ❤❤❤
May ganan po ako mataas na ano po nikalagay sa tubig babad lang po ba sa tubig dahon
Can we take a leaf from a tree
Wonderful didn't know before
Heyy! I have a question. If you cut a branch off with a few leaves like you did, can you just propagate the whole thing instead of cutting it into pieces? Will it still shoot roots that way? Thanks!
Yes, u cut a branch with a leaf, put it in water and wait for roots to come out. Dont propagate the leaves cuz it wont grow into a new plant.
@@feroxartem Hi! what kind of water you use? And adding something in water?
@@kjetvl tap water, you dont need to add anything. Just put a branch in water and wait few weeks till you get nice roots and then you can transfer it to soil. I use any standard compost I can find in garden centre or in supermarket.
@@feroxartem Thank you a lot
@@kjetvl no problem, good luck with your cutting
Thank you for sharing these video, will try and experiment too.
wow! great
Do you use any chimical like miracle grow
yes sometimes
What is miracle grow?
Cool 👍👍👍
The roots on the potted cuttings grew crazy fast!
By the way, did you water the cuttings that you put inside the plastic bag? Also, the way you tied the plastic bag is it airtight?
there’s no need of watering for a month and the plastic cover should not be close tight. but the way I did on the video initially is too tight and I think that was the reason why one of my propagated plant rotted.
00 lol
Yes I like ssimple rcepie event sardin pechay or pechay eag k na sardin kalamasi lemon thanks very good
Ììììkķ
@@thegreenearth ko
Hi is it really true that new leaf will come from leaf propogation? Because it has been 2 months now of my soil propogation, root has came, leaf also looking fine but no new shoot came out. Can you please help on this?
Hi, yes I have also the same rooted leaf with almost 7 months now and still no new shoot. According to what I read on my research it won’t produce new plant and will die eventually.
Amasing😁
Hi.. if leaf is tore, will it become normal.. I tore leaf while cleaning.. feeling bad..
is that your propagation plant?
@@thegreenearth no I bought it from nursery
@@vishalikongara8925 its ok if you torn your rubber plant leaf it will be still alive but you cannot save the leaf. If you want your rubber plant become bushy you can prune it so it will produce more shoot.
@@thegreenearth yeah..it will not stick back..thats what i wanted to know.. I will prune it and see.. thank you for quick response.. much appreciated.. have a great day ahead..
Thank you for sharing this video and to given an idea for us as a viewers.
do the leaf-only propagations ever produce a plant?
no, I made a continuation video about it
How much take time to grow by leafy ?
Amazing👌👌👌
Can i cut the new leaf and propagate it
You can propagate it just make sure the cutting has leaf and stem.
@@thegreenearth thanks 😍
I repotted my rubber plant but new pot soil does not allow to water out immediately actually water is not coming out, what should i do ?
buy perlite or coco peat and mix with your normal soil. 60% normal soil and 40% perlite or cocopeat.
Are you using plastic pots?
What type of soil to use?
yes it is plastic pot and I use a well draining soil (normal potting soil + perlite)
Çok güzel bir video 🌺💕
Ini daun karet kebo bukan ya ?
How long leaf can grow propagated in the water?
Hi Pejuang, leaf will root in water in just 3-4 weeks, but I will not recommend doing so, because it won’t continue into a new plant.
@@thegreenearth so can not planted on a soil after propagate in the water?
Ilanadays po ibbabad sa tubig
İt is nice
Can ı propagate with a fallen leaf? Should ı out it to water or plant in a soil? My ficus elastic has been shedding its leaf, ı keep putting them into water but ıt's not working?
Leaf alone cannot produce you a new plant. When you are propagating rubber plant make sure to have a stem on the leaf.