Hello Kin, congratulations on this initiative to create these videos with quick and objective explanations of how to use the resources of these wonderful boards. Congratulations and success!👋👍
Hello, your work looks great, congratulations. I am designing a card that will display RS485 modbus and 0-10V analog input values with ESP32 Nodemcu. What components did you use to display 0-10V analog inputs with ESP32?
I have 100pcs 600W lights. Each 1 has a 50W driver with 0-10V dimming option. How many of these lights drivers can I control with this board? Can I control all of them, 100pcs if I connect the drivers in deasy chain - serial connection ?
How can i use KC868-AP board for 0-10V Dimming?? This board support 12/24V as output so how to use this for 0-10V dimming? Can you please make a video?
Hello,I am facing one issue, I have Two ESP chip...One is ESP 32E and second is ESP 32UE,Both having same datasheets...Issue is ESP32E is connecting with Mobile Hotspot and Home router als, But ESP32UE is connecting only with Mobile Hotspot, it is not Connecting With Router... I have tested with same code for Both Chip ...Please can you anything?...
I have 100pcs 600W lights. Each 1 has a 50W driver with 0-10V dimming option. How many of these lights drivers can I control with this board? Can I control all of them, 100pcs if I connect the drivers in deasy chain - serial connection ?
@@KinCony But how to use with 0-10V dimming ? As we can use D16 board directly for dimming but how is possible to use kc868 -AP for 0-10v dimming? Sorry there's little confusion about this? please explain in detail
Hello Kin, congratulations on this initiative to create these videos with quick and objective explanations of how to use the resources of these wonderful boards.
Congratulations and success!👋👍
thank you.
Sir, always I like your perfection....and way of tutorial
Hello, your work looks great, congratulations. I am designing a card that will display RS485 modbus and 0-10V analog input values with ESP32 Nodemcu. What components did you use to display 0-10V analog inputs with ESP32?
you can use SSD1306 display.
@@KinCony Sorry, I asked the question wrong. What are the components you use to receive 0-10v analog information or connect sensors?
just use ADC pin, which chip model for convert you can check with our board's diagram.@@burhanmutlu16
Thanks bro continue for your job
thanks, will continue do it.
Sir, what are the reasons and benefits of having many small holes in a PCB? video time 1:55
Good grounding performance, providing anti-interference performance
Thank you sir, if any detailed video or blog your or any other please share link
Great 👏
I have 100pcs 600W lights. Each 1 has a 50W driver with 0-10V dimming option. How many of these lights drivers can I control with this board? Can I control all of them, 100pcs if I connect the drivers in deasy chain - serial connection ?
Several lights connected in parallel. how many drivers to use, according to MAX power of each driver.
My question was: How many Watts can your board handle?
that according to the extender driver's power, not our board.@@piramida51
How can i use KC868-AP board for 0-10V Dimming?? This board support 12/24V as output so how to use this for 0-10V dimming?
Can you please make a video?
th-cam.com/video/ANK8TFzJHbs/w-d-xo.html
Sir, how this is to implement on light
add a driver work with LED strip or lamp
Hello,I am facing one issue, I have Two ESP chip...One is ESP 32E and second is ESP 32UE,Both having same datasheets...Issue is ESP32E is connecting with Mobile Hotspot and Home router als, But ESP32UE is connecting only with Mobile Hotspot, it is not Connecting With Router... I have tested with same code for Both Chip ...Please can you anything?...
try to test, not use two module at the same time. whether work well, if only use everyone esp32 module.
Actually I am not using two module at a time. One at a time I am using...
Should I need to upgrade firmware for ESP32UE?...
check whether have different firmware inside.@@ajayshokal7193
Thanks For your rly, May I know how to check it's firmware,...any specific code is there on Google to show firmware details?...
I have 100pcs 600W lights. Each 1 has a 50W driver with 0-10V dimming option. How many of these lights drivers can I control with this board? Can I control all of them, 100pcs if I connect the drivers in deasy chain - serial connection ?
it according to your driver power, if 100pcs, suggest use our KC868-AP board, that is 16CH dimmer OUTPUT board. 100pcs lights no problem.
@@KinCony Does KC868-AP support 0-10V diming?
Please make a video ?
yes, it support ,here is video: th-cam.com/video/ANK8TFzJHbs/w-d-xo.html@@adarshsonalika7493
@@KinCony But how to use with 0-10V dimming ? As we can use D16 board directly for dimming but how is possible to use kc868 -AP for 0-10v dimming? Sorry there's little confusion about this? please explain in detail