ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
What to do when quick release couplings leak? | KRAMP
ฝัง
- เผยแพร่เมื่อ 12 ส.ค. 2024
- This video contains everything you need to know about quick release couplings, what to do when they leak and whether to repair or replace them. Subscribe to our channel! ⇨ bit.ly/subscribekramp
______________________________________________________________________
Want to skip ahead to a specific part of this video? Check out the following steps:
00:00 - Introduction into Quick Release Couplings
01:17 - Quick Release Couplings Explained
02:09 - Step 1: Find out which quick release coupling you need
02:57 - Step 2: Replace the sealing
03:56 - Step 3: Replacing the complete quick release coupling
______________________________________________________________________
Quick release couplings are also known as quick disconnect fittings, or quick connects. They’re used to connect two applications. 99% of the time, they link a flexible part - a hose - to a fixed part. And they provide a fast and easy way to connect or disconnect your piping and tubing, with a special design that is suppósed to prevent any leaks.
______________________________________________________________________
We see them in a wide variety of industries, including, of course… Agriculture! For example, when you connect some type of machinery to your tractor, the valve that closes the system is a quick release coupling. They’re designed to make it easy for you to attach and detach multiple hydraulic systems to your tractor and to switch between equipment without leaking any hydraulic fluid in the process.
______________________________________________________________________
To find more information about the sets used in this video, be sure to check out our website! www.kramp.com/shop-gb/en/sear...
______________________________________________________________________
In this playlist you will find everything about Hydraulics & Transmissions. Like how you make a hydraulic hose. Or the basics of Power Take Off shafts.
• Hydraulics & Transmiss...
______________________________________________________________________
Welcome to our TH-cam channel. Here you will find everything you need to know about Quick release couplings, Types of diverter valves, Hydraulic top links, Types of bearings, The workings of a piston compressor and much much more!
______________________________________________________________________
Kramp Groep is Europe’s largest specialist in spare parts and accessories for the agricultural industry. Kramp is the essential partner for its customers and suppliers with over 500,000 products online available, 11 distribution centers, and 24 sales offices spread over Europe. Kramp Groep was founded in 1951 and has its headquarters in Varsseveld (the Netherlands). Kramp. It’s that easy.
______________________________________________________________________
🚜 - Follow us on - 🚜
Website: www.kramp.com
Facebook: / kramp.uk
LinkedIn: / kramp
Instagram: / kramp_uk
______________________________________________________________________
#Kramp #HydraulicsTransmissions #QuickReleaseCouplings
![CAMPปลิ้น | EP.79[2/2] มานั่งฮ้านกินข้าวนำกันเด้ออ้ายยย](http://i.ytimg.com/vi/pHIS_Sdy8P8/mqdefault.jpg)
What led you to this video? Let us know in the comments!
Tractor's front end loader. Great, precise video! Thanks!
got a few air conditioning R134a quick release coupling which leaks quite easily. thanks for the tips.
New Holland Workmaster 75 with a 625TL loader. Couplers drooling like a navy jet. Capacity is only 2 gallons vs most JD Im more familiar with holding 22 gal. OEM couplers are way overpriced, so rebuilding these. Thanks for the video. Its been very helpful.Ill be looking for your company.
Great information. But can you do how to check for air leaks con air lines and/or fittings.Thank you.
Great video! Thanks!
73hp tractor subframe mounted backhoe. digging a septic tank hole, and the rear remote started leaking. I'm researching the fix. thank you for the video
thanks
I cannot find anywhere the O-rings, especially the white plastic one for 1/2" coupling. Where can I get them? Thanks, great video.
Kubota front loaded quick-connect leak.
Hi Kramp
I am proposing to use the dry breaks on my 4600 John Deere
to facilitate the snow plow I am fabricating. I wanted your
opinion about if this is a workable idea.
I have obtained a well-used 7 foot Western commercial snowplow
with hydraulic angling. I obtained a TITAN pallet fork JDQA frame.
The 4600 has 4 hydraulic ports to operate the loader that use dry
break quick connects. I have attached the plow to the Titan frame
with a 2 pin removable 2x2 x 3/8 angle steel. I have a grade 120 chain
attached to the top of the Titan frame headache assembly to lift the
plow blade. The system works but I have no more hydraulic ports available
on the tractor to operate the plow angel cylinders.
I propose to set up the plow on the 4600 and adjust the lift and a blade
chain tension. Then shut off the 4600 and disconnect the “tilt” and “dump”
dry breaks from the front end lift. Then connect the hydraulic plow
angle cylinders to the now available “tilt” and “dump” ports on the 4600.
Now, I can operate the plow up and down and operate the left or right
angle cylinders with the “tilt” and “dump”.
MY questions:
1.) Can the dry breaks disconnect the loader while
there is minor pressure from the chain tension?
2.) Will the disconnected dry breaks hold pressure
changes as the plow pushes heavy snow?
3.) Do you see and other issues?
Thanks
George
looking for info on 5610 tractor with lever locking hydraulic outlets pizzing fluid out all over
You show how to fix oring in popper type connector.
You do not show how to repair flat face connector.
THIS!! The whole reason I came, as well!
He strung us along to tell us nothing 😢
Kubota 4 in 1 loader quick connect. Going to replace with 4 individual ones!
Make us a video. LOL I need to do this too
JD 332 with front loader.
Attachment line on a Bobcat 435 mini Excavator
QuickJack coupling o-ring blew out because there was still preassure on the hose when it DX'd
My portapower Blackhawk coupling is leaking under pressure
When i attached tractor valve to trolly valve the oil is come all over the cupler
F yea Jim need to do this on my tractor leaking like a sive
A leaking coupling on a skid steer. It started as a drip. An hour later it was a trickle. I have a machine not being used. I will swap out the same coupling to see if this will stop the leak.
Did it stop?
Female coupler stayed open after disconnected. Why would this happen? Only 11/2 years old.
I'm connecting a compressor to a pressure pot tank and for some reason, the quick connect and the coupler is leaking air.
co2 blaster :)
Leaking quick connect coupler to 4 in 1 bucket on 80hp tractor.
Tractor male poppet o ring popped out
Got a leak on a JCB telehandler. Replaced the female end but still have a leak. I came to try to find out if and how flat faced male couplings leak.
You screwed up and bought a JCB.
Mahindra 1526 loader hydraulic fitting leaking
Front end loader
my quick jack coupler are leaking Q_Q
Mahindra 1526 loader hydraulic coupler leaking
Landpride batwing mowing decks brought me here.
quickjack couplers brought me here
You too eh? So much for "leak proof" quick connects! And of course the leak happened a month after my warranty expired. But even if my warranty was valid I'm sure QuickJack has a weasel clause to get out of replacing faulty couplers. SABE MFG doesn't offer a way to purchase from them directly as a consumer. Replacement cost from QJ and their distributors is $50 plus shipping. Final cost is between $65-$73. I found different couplers that would work for $35 (shipping included) but the flow rate was much higher than the SABE MFG. After doing some research it is not advisable to mix couplers that have different flow rates. If I spring another leak, I'm going to change out all the couplers with the others I found or go with the traditional hydraulic couplers (the ones with the bearings inside the female end). I've used that type of coupler for over 10yrs on my plow Jeep and on my tractor with no issues at all.
My female
Coupler leaks without being connected to a male coupler, why?
By the way, it’s an old John Deere tractor.
Wood trailer
Pressure washing
Leaky tractor lines
In a six minute video you took 2 minutes to get to any issue
Well, I have left my comment twice but for some reason, TH-cam is deleting it. QuickJack flat face couplers brought me here. The leak is happening on the male coupler. I would give more info, but my comment will be deleted. TH-cam is starting to really SUCK!
But you don’t show HOW to replace the coupling 🤦♂️
Obvious it screws on and off, but no one shows how to stop the oil from flowing out when the old coupling is removed 🤔 🤨
PCP …. The female Foster leaks when I try to Pressurize my Airguns ?
Where the F is the chart?
Get to the point!!!