Finally fially somebody explained this clearly. Got answers why the MB is not starting when no coin battery is inserted: PCH core not getting voltage due to missing LDO 3.3V, possible a faulty (broken) diode. Thank you!
Please sir, I HAVE HP MOTHERBOARD WHEN I PLUG ADAPTER WITHOUT CMOS POWERS ON WELL, WITH CMOS NOT POWER ON I TRIED TO REPLACE WITH NEW STILL SAME PROBLEM. I CHECKED RTC SECTION EVERYTHING WAS OK. PLEASE SIR WHAT WHY IS IT THat I need to first reset motherboard first to power on Isit INTERNAL PCH RTC SECTION WHICH IS FAULTY, AND I NEED TO REPLACE PCH CHIP PLEASE SIR WHAT COULD BE CAUSE AND SOLUTION FOR SUCH ACASE
Hi friend I have had this issue ones on a Samsung laptop where it works with the CMOS battery disconnected, and it doesn't work when connecting it back. It turned out to be a low battery where it kinda gives a voltage to the Bios and causes it to stuck and needed to be reset . But I think you mentioned that you've already replaced it with a new battery. Is that right..? If you did, then please make sure it has the correct voltage (the new battery). If it does have correct voltage, you need to check and look for a dual diode package and check before it and after it for a voltage of 3 to 3.3 volts with the battery connected and with and without power adapter connected You must not get less than 3 volts...
@@FixTronics ohh OK sir, i have talked about this, because when I plug in adapter in Mother board it's power on well, then When I switch off properly with its power button switch it switches off well. Without removing its adapter. But when I try to switch on, it cannot switch on yet it has switched off properly, this time without cmos Beacuse even I tried to switch on from EC chip pin pwrbtn# in it does not switch on but can switch off well
Thank you very much for another terrific explanation. It takes away all the heavy lifting in the circuit diagrams. Much appreciated.
Thanks for your support brother
Finally fially somebody explained this clearly. Got answers why the MB is not starting when no coin battery is inserted: PCH core not getting voltage due to missing LDO 3.3V, possible a faulty (broken) diode. Thank you!
Thank you brother
This is very very satisfying, you really do understand the concept.
Hi friend thanks for the informative video
very nice . many love
Yaaaay.... Finally. I've been patiently waiting. Thanks for sharing Sir.
Doing awesome work. 👌
Thank you sir...hoping for more informative videos sir..
Great work!!. Greetings from Spain
Welcome brother
if those signals are missing, the laptop dont start???i love your explanations dude, you are rockkkkk
Yes of course it won't start with any missing signal
I wish you all the best brother
Excellent explanation !
Was waiting for this video awesome sir thanku so much
You are welcome dear friend
thank you for good explanations
Nice explanation! thanks😊
Good we Hope for power Switch circuit
Hope you r providing us right information 👍
Great work keep it up can you please do a video on DC to DC and and the system IO
Thank you Very much Sir.
nice video thanks
SUPER
exelente esplicacion del RTC
thx for the quick explanation
Thank you for the explication, i want to know how verify those signals and with what kind of materials (multimeter or oscilloscope) ?
Thank you sir❤❤
Supper video
Thank you sir 🙏
Welcome brother
Thank you bro
Sir , is RTC 3v missing common complaint on laptop??
It isn't common but it happens
Thank you
Exellent. Thank you.
Thanks brother
Please sir, I HAVE HP MOTHERBOARD WHEN I PLUG ADAPTER WITHOUT CMOS POWERS ON WELL, WITH CMOS NOT POWER ON
I TRIED TO REPLACE WITH NEW STILL SAME PROBLEM.
I CHECKED RTC SECTION EVERYTHING WAS OK.
PLEASE SIR WHAT WHY IS IT THat I need to first reset motherboard first to power on
Isit INTERNAL PCH RTC SECTION WHICH IS FAULTY, AND I NEED TO REPLACE PCH CHIP
PLEASE SIR WHAT COULD BE CAUSE AND SOLUTION FOR SUCH ACASE
Hi friend
I have had this issue ones on a Samsung laptop where it works with the CMOS battery disconnected, and it doesn't work when connecting it back.
It turned out to be a low battery where it kinda gives a voltage to the Bios and causes it to stuck and needed to be reset .
But I think you mentioned that you've already replaced it with a new battery. Is that right..?
If you did, then please make sure it has the correct voltage (the new battery).
If it does have correct voltage, you need to check and look for a dual diode package and check before it and after it for a voltage of 3 to 3.3 volts with the battery connected and with and without power adapter connected
You must not get less than 3 volts...
@@FixTronics ohh OK sir, i have talked about this, because when I plug in adapter in Mother board it's power on well, then
When I switch off properly with its power button switch it switches off well. Without removing its adapter.
But when I try to switch on, it cannot switch on yet it has switched off properly, this time without cmos
Beacuse even I tried to switch on from EC chip pin pwrbtn# in it does not switch on but can switch off well
Hi there, did you fix the HP issue? I have two HP laptops that had the same problem and looking forward to fixing them. Best regards
Is HOW TO MECHATRONICS your channel?
No it isn't my dear
@@FixTronics but you guys sound really similar... BTW keep up the great work!
Thanks...
@@burhanuddin127
Really 😅
U R welcome bro
Who this make dislike . Good explanation
Thank you so much brother
you have telegram channel?? please share id ??