Two Brothers Comp-S Exhaust for Harley Review at RevZilla.com

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น • 88

  • @whitemountaincannabisco.400
    @whitemountaincannabisco.400 3 ปีที่แล้ว +5

    Stainless is the way to go, my bike was running too lean initially. But the result was great in the sense that the stainless developed a lot of color. Gold throughout and then blue/ purple hear the heads... a result of lean tune, but still gave it a lot of character. Now i have the proper map and this pipe sounds awesome! Very aggressive and light years better than the bassani I replaced with the TBR comp. Your neighbors will definitely not approve... unless they ride...

  • @TheBrowning3030
    @TheBrowning3030 6 ปีที่แล้ว +5

    I have the two brothers on my 2015 street bob i sounds grate and you can feel the diffrence in the power from stock. Also looks grate and sounds amazing in person spits a little fire too.

  • @mikekaestner7562
    @mikekaestner7562 5 ปีที่แล้ว +3

    Being put on my Iron 883 this week !
    Black ceramic, Arlen Ness Monster 90 deg intake, Harley active tuner.

    • @anthonysullivan21
      @anthonysullivan21 5 ปีที่แล้ว

      I have the same setup. I just Installed the other day. But I have a fp3 and seem to be getting a lot of decel pop how is yours when riding?

  • @jamessouthworth1699
    @jamessouthworth1699 4 ปีที่แล้ว +3

    I run the Comp S on my 2003 Dyna and while I do I like the exhaust it was very loud. So I installed the two brothers optional baffle which did bring it down some but I had to modify the baffle to get it down a little more. On the two brothers baffle there is a dime-sized hole opposite end of the outlet that I had to weld shut to bring the sound down just a little bit more. I think two brothers should offer more than one baffle option because the baffle they offer now doesn't bring down the sound level very much.

    • @blackrain5150
      @blackrain5150 3 ปีที่แล้ว +2

      What jetting did you use for this I just purchased and it’s pooping on the decel

    • @jamessouthworth1699
      @jamessouthworth1699 3 ปีที่แล้ว

      @@blackrain5150 I tried a few different combinations at my bike seems to be very happy with a 46 slow jet and a 190 main jet in combination with having the baffle in the TBR pipe end running a Screamin Eagle heavy breather air cleaner.
      My baffle is modified. I welded shut the dime-sized hole that comes in the front of the baffle.

    • @dvandriel2549
      @dvandriel2549 2 ปีที่แล้ว

      @@jamessouthworth1699 what about the performance after the welding?
      Grtz

    • @jamessouthworth1699
      @jamessouthworth1699 2 ปีที่แล้ว +1

      @@dvandriel2549 Power didn't feel any different to me.

  • @bombproofrazor
    @bombproofrazor 4 ปีที่แล้ว +1

    Can you pull out the baffle on this one like other exhaust?

  • @gmajors82
    @gmajors82 9 ปีที่แล้ว +9

    Lemmy is the man

  • @grimeyhonkyracing3938
    @grimeyhonkyracing3938 6 หลายเดือนก่อน

    Is the header pipe stepped or is that just a regular weld seam

  • @DonteArmstrong
    @DonteArmstrong 3 หลายเดือนก่อน

    Does it work with forward controls?

  • @YoungAngel3k
    @YoungAngel3k 7 ปีที่แล้ว +6

    Hi RevZilla, deciding between a bassani 2 into 1 or the TBR. wanting to know which is louder in sound and which has better performance for a low rider s 2017. thanks mate

    • @HarleyFatBoyJr
      @HarleyFatBoyJr 3 ปีที่แล้ว

      aloha greg!! what did you end up going with? In the same boat myself right now. Mahalo advance!!

    • @951SPIKY
      @951SPIKY 3 ปีที่แล้ว +1

      @@HarleyFatBoyJr My friends recently got a Bassani and I got a TBR in my honest opinion if you want a deep growl go with TBR all the way sounds amazing. Music to your ears

    • @HarleyFatBoyJr
      @HarleyFatBoyJr 3 ปีที่แล้ว

      Yessir!!! Went w TBRs Shorty Turnouts. 🔥🔥🔥🔥

    • @MarcosGarcia-dg2ux
      @MarcosGarcia-dg2ux 3 ปีที่แล้ว

      I’m in the same boat! Which one is a better performing exhaust?

    • @YoungAngel3k
      @YoungAngel3k 3 ปีที่แล้ว +1

      @@HarleyFatBoyJr hi mate i ended up going for the bassani RR3. Sorry for the late reply

  • @JRodzTv
    @JRodzTv 8 ปีที่แล้ว +1

    @revzilla somebody on your website said they had issues with the installation. They also said after 1k of riding the brackets broke. Thinking of this pipe but not sure.

    • @RevZilla
      @RevZilla  8 ปีที่แล้ว +2

      +JRodzTv We haven't experienced any issues with installation personally, and we really haven't seen many broken brackets. If you are concerned about warranties, Cobra's is the best with a lifetime limited warranty on their exhausts. However, Cobra doesn't make a 2-into-1 like the Two Brothers Comp-S. -DrewZilla

  • @paulperecinsky2771
    @paulperecinsky2771 ปีที่แล้ว

    Early 2006 1200 Custom. Carbureted. What jetting do You recommend?

  • @nickpratt6642
    @nickpratt6642 8 ปีที่แล้ว

    have these on my 2014 sportster 48. Badass and loud as hell. people can hear you coming from a mile away with these bad boys on. will for sure put them on my next bike too.

  • @jonjcannella
    @jonjcannella 8 ปีที่แล้ว +2

    yeah bro I just added this to my DYNA yesterday. I have a Fuel moto 107 hop up and it sounds like the devil is in my motor trying to get out. Super easy install infact I did it live on FB in about 40 min total from removal to replacement. So without social media maybe 30 min. Had Vance and Hines Grenades but wanted to run defender bags and not possible with those pipes. Like the sound of the Grenades Better they were just obnoxious. but TWB seems to have more power!!! love theses pipes
    Aloha Jon Can from Hawaii

  • @ehegger
    @ehegger 8 ปีที่แล้ว

    I'm looking at these in stainless and considering wrapping from the collector up to the gasket. Will that give enough protection from heat or should I install the heat shields and then wrap over those?

  • @mopar21
    @mopar21 2 ปีที่แล้ว

    So...Bassani or 2 Bros? Have a 20 XL1200NS, going to run heavy breather and SE tuner

  • @RaytheonNublinski
    @RaytheonNublinski 7 ปีที่แล้ว +1

    Looks so good. Going with raw stainless for my 07 matte black victory. Looks too good to get in black. I love it.

  • @jessedeloera8032
    @jessedeloera8032 4 ปีที่แล้ว +1

    Is it true you can’t dyno tune the bike with those ?

    • @RevZilla
      @RevZilla  4 ปีที่แล้ว

      No, that's not true at all. You can certainly dyno tune a bike with this exhaust installed. -DrewZilla

  • @devongerrits1720
    @devongerrits1720 2 ปีที่แล้ว

    What gasket replacement do you recommend for the 17 fxdls. Thanks

  • @Auto_Junky
    @Auto_Junky 3 ปีที่แล้ว

    Does this exhaust work with forward controls?

  • @suavez.productions9354
    @suavez.productions9354 5 ปีที่แล้ว +1

    Is this going to ever go back in stock for the street rod 750 version??

    • @RevZilla
      @RevZilla  5 ปีที่แล้ว

      We do expect it to come back into stock, but currently we do not have an ETA. -DrewZilla

  • @ritchienomore7974
    @ritchienomore7974 2 ปีที่แล้ว

    For Yamaha boltr 950 ?

  • @keithj666
    @keithj666 9 ปีที่แล้ว +1

    What's the sound like compared to a Thunderheader?

    • @RevZilla
      @RevZilla  9 ปีที่แล้ว

      +Keith Jacobe That's a bit subjective and difficult to put into words. Since you've heard the Two Brothers in this video, I recommend looking for some other TH-cam videos of a Thunderheader 2-into-1 on a Sportster or Big Twin. -DrewZilla

    • @TheYamaha109
      @TheYamaha109 6 ปีที่แล้ว

      Depends on what motor you have most of the time, I think these sounds great on the twin cam 88 and it is more raspy than the thunder header both are pretty deep but at high rmp you can really hear the motor sing with the two brothers

  • @jameskim5592
    @jameskim5592 7 ปีที่แล้ว

    Its confusing that you are showing two different versions of the Comp-S exhaust. The one in your mod series of videos is more of a straight shot, whereas the one in this video has a slight upsweep. Is there a signficant difference in clearance?

    • @RevZilla
      @RevZilla  7 ปีที่แล้ว

      I see what you mean. It looks like Two Brothers made a slight change. There isn't a major difference in clearance. The straighter muffler is the current production version it seems. Our apologies for any confusion. -DrewZilla

  • @boxcarbro3043
    @boxcarbro3043 5 ปีที่แล้ว

    How does the muffler mount to the dyna? Is there a bracket? Or does it mount directly?

    • @RevZilla
      @RevZilla  5 ปีที่แล้ว

      The exhaust mounts to the heads and to an exhaust bracket. -DrewZilla
      *www.revzilla.com/assets/0000/8515/005-3750199_inst.pdf

  • @blackrain5150
    @blackrain5150 3 ปีที่แล้ว

    Just purchased for my 03 fxd super glide and has a lot of pop on the decel what main jet should I use for carb

    • @CanadianTopG
      @CanadianTopG 2 ปีที่แล้ว

      It's your slow jet that's the issue, not your main jet.
      Put a 48 slow jet in and it should fix the issue.

  • @cjhumber12
    @cjhumber12 7 ปีที่แล้ว

    These look and sound badass on my sand camo 883, but so much decel pop! Did you guys have this too? FP3 decel pop reduction seems pretty useless for it.

    • @RevZilla
      @RevZilla  7 ปีที่แล้ว

      Did you run auto-tune mode as well, or did you just apply decel pop reduction to a pre-made map? -DrewZilla

    • @cjhumber12
      @cjhumber12 7 ปีที่แล้ว

      I haven't run autotune yet. I've only tried the decel pop reduction on the canned map for the V&H Competition Series 2-into-1 with a high flow a/c. Everything seems snug and leak free.

    • @RevZilla
      @RevZilla  7 ปีที่แล้ว

      In that case, I'd run through a tank of gas while in auto-tune mode, to see if that improves the situation. -DrewZilla

  • @JRodzTv
    @JRodzTv 8 ปีที่แล้ว

    I'm debating between this exhaust and a Bassani, I like how it's short but at idle won't you be able to feel the heat because the exhaust is shorter?

    • @RevZilla
      @RevZilla  8 ปีที่แล้ว +2

      +JRodzTv You won't necessarily feel more heat. Both exhausts have heat shields, but honestly, you'll feel heat from both. I don't the Two Brothers will feel appreciably hotter than a Bassani. -DrewZilla

  • @theodore998
    @theodore998 9 ปีที่แล้ว

    As a reference point what bike was used and how does it sound stock?

    • @theodore998
      @theodore998 9 ปีที่แล้ว

      looks like an HD iron

    • @RevZilla
      @RevZilla  9 ปีที่แล้ว

      +Waka Maka Yeah, it's a Sportster Iron 883. -DrewZilla

  • @morrisonhotel5013
    @morrisonhotel5013 4 ปีที่แล้ว +1

    Is this street legal?

    • @RevZilla
      @RevZilla  4 ปีที่แล้ว +1

      Yes, except for in California where it is not CARB approved.
      I hope that helps!
      -Zack

  • @breakfast00club..11
    @breakfast00club..11 4 หลายเดือนก่อน

    I changed one put same pipes but never tuned it runs great though.. should I take it to harley and have never tune it..or wait till I get the next tune up
    Low Rider ST 24

  • @adhyherl
    @adhyherl 7 ปีที่แล้ว

    Haaii RevZilla....can I instal this xhaust in my FXDS Convertible 1994 ?

    • @RevZilla
      @RevZilla  7 ปีที่แล้ว +1

      No, it is not compatible with your FXDS. However, take a look at the following 2-into-1 exhausts. -DrewZilla
      *www.revzilla.com/motorcycle/bassani-road-rage-iii-2-into-1-exhaust-system-for-harley-dyna-1991-2017
      *www.revzilla.com/motorcycle/bassani-road-rage-2-into-1-greg-lutzka-exhaust-for-harley-dyna-1991-2017
      *www.revzilla.com/motorcycle/bassani-road-rage-mega-power-exhaust-system-for-harley-dyna-1991-2017

  • @marcoantonio6966
    @marcoantonio6966 5 ปีที่แล้ว

    I just bought this pipe from you guys. What kind of gaskets do you recommend?

    • @RevZilla
      @RevZilla  5 ปีที่แล้ว +1

      James Gaskets are great, and you can choose any of the styles. Graphite is the most popular. -DrewZilla
      *www.revzilla.com/motorcycle/james-exhaust-gasket-kit-for-harley

  • @chains0594
    @chains0594 6 ปีที่แล้ว

    5’7” and they burn the shit out of my leg. The heat shield covers the foot while on the peg but not the leg when stopped

  • @johnthomas2587
    @johnthomas2587 5 ปีที่แล้ว

    How bout an update....18 softail?

  • @brandonbishop825
    @brandonbishop825 8 ปีที่แล้ว

    +DrewZilla I am attempting to Cafe my HD 883. I heard that this exhaust has a slight ground clearance issue. I am wondering if the burly 13" cafe shocks will help with that? I debated on a Bolt Cspec but chose the HD because well my wife said so. haha and is there going to be an issue with passenger peg placement with this exhaust? I just feel like this is the sound I want my cafe'd 883 to put out.

    • @RevZilla
      @RevZilla  8 ปีที่แล้ว

      If you take a look at our Sportster Mods Series, you'll notice that we installed this exhaust on an Iron 883 along with 13" Progressive 970 Shocks. The taller shocks do help, but Lemmy was still able to scrape the exhaust shield in aggressive cornering. For slightly more clearance, consider the similar Vance & Hines Up Sweep, Comp Series, and MagnaFlow Riot 2-Into-1 systems. The Two Brothers Comp-S as well as my other three recommendations will work with passenger pegs. -DrewZilla
      *www.revzilla.com/common-tread/house-sportster-project-wrap-up
      *www.revzilla.com/motorcycle/vance-hines-upsweep-2-into-1-exhaust-for-harley-sportster-2004-2016
      *www.revzilla.com/motorcycle/magnaflow-riot-2-into-1-exhaust-for-harley-sportster-2004-2016
      *www.revzilla.com/motorcycle/vance-hines-competition-series-2-into-1-exhaust-for-harley-sportster-2014-2016

    • @OctaviusPelagius
      @OctaviusPelagius 7 ปีที่แล้ว

      +DrewZilla I have a Sportster Roardster and just installed the recently introduced rear set controls. They are slightly lower than the passenger pegs. Would there be a problem with this exhaust?
      Thanks!

  • @blackOut-jh8cd
    @blackOut-jh8cd 7 ปีที่แล้ว

    Hello, what do you recommend me? TBR or bassani road rage

    • @RevZilla
      @RevZilla  7 ปีที่แล้ว

      Both are good options, but for the Lowrider S, you might prefer the Road Rage. -DrewZilla

    • @connormarks5989
      @connormarks5989 7 ปีที่แล้ว +2

      Why would prefer the Road Rage to these TBR's? Looking for new exhaust and torn between V&H and the TBR Comp S. Also planning on getting the V&H FP3 tuner, if I get the TBR's what map would I select on the FP3? THANKS!

    • @John_shepard
      @John_shepard 7 ปีที่แล้ว

      Connor Marks tbr is good if your not doing a big motor build real low deep tone but will roar when crack the throttle

  • @djfxbb2641
    @djfxbb2641 5 ปีที่แล้ว

    Curious to know if my forward controls would give me any issue installing these exhausts. Can’t find anything online. Please anyone??

    • @RevZilla
      @RevZilla  5 ปีที่แล้ว

      I'll assume by your TH-cam username that you have a Softail Street Bob. If you look on the photo on the product page, you can see that the exhaust for is routed to accommodate forward controls (yes, the photo is of a Fat Bob, but it still applies to the Street Bob). Hope this helps! -DrewZilla
      *www.revzilla.com/motorcycle/two-brothers-comp-s-2-into-1-exhaust-for-harley-softail-2018

  • @orlandolarosa1928
    @orlandolarosa1928 7 ปีที่แล้ว

    hello there will this work with rear sets

    • @RevZilla
      @RevZilla  7 ปีที่แล้ว

      Yes, you can run these with rearsets. I recommend those from RSD. -DrewZilla
      *www.revzilla.com/motorcycle/roland-sands-rearsets-for-harley-sportster

  • @Natecoxy
    @Natecoxy 8 ปีที่แล้ว

    Hi, I just fitted one of these to my 03 dyna.... broke the bracket on the 1st ride because the front pipe is too close and hits the frame! I had to dent the front pipe with a hammer to make enough clearance. Very average performance on the dyno with a massive torque dip from 3-3.5k rpm. Definitely do not recommend this pipe.

  • @acruz5920
    @acruz5920 8 ปีที่แล้ว +1

    debating on rsd or two brothers. anyone in the i.e have these?

    • @williams2652
      @williams2652 6 ปีที่แล้ว

      The RSD pipe is garbage and runs hot I know cause I replaced it with a TBR comp 2 pipe.

  • @suavez.productions9354
    @suavez.productions9354 6 ปีที่แล้ว

    On your website this says it fits on the on the street rod 750. Is that true? If so, that would be cool

    • @RevZilla
      @RevZilla  6 ปีที่แล้ว

      Yes, there is a version for the Street Rod 750. It's currently out of stock but hope to have more stock soon. -DrewZilla
      *www.revzilla.com/motorcycle/two-brothers-comp-s-2-into-1-exhaust-for-harley-street-2015-2019

  • @randymason6852
    @randymason6852 6 ปีที่แล้ว

    Dont know about the TBR but Ive installed magnaflow aggressive riot 2into1 amazing sound and look great

  • @20Radman07
    @20Radman07 3 ปีที่แล้ว

    Pleasant, Informative, Awesome to listen to. Subscribed. Thanks !

  • @Hazardhemi
    @Hazardhemi 8 ปีที่แล้ว +1

    omg love it!

  • @billgonzales2339
    @billgonzales2339 4 ปีที่แล้ว

    too small for big motors.

  • @robert673
    @robert673 8 ปีที่แล้ว

    Love mine! Hear it on my channel.