The Burris Signature Ring Mounting System
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- The Burris Signature Ring System provides tremendous gripping power, protects your scopes finish, insures proper alignment and guarantees 100% scope-to-ring contact. Pos-Align Offset Inserts allows you to sight-in your scope without moving internal scope adjustments.
Thank God for Burris Signature Rings. If only I had known about them when I first took up target shooting.
Thank you very much. This was a complete and thorough explanation. Kudos to the producers.
Lol, that dudes face after they show the bullet not hitting where hes aiming. That was hilarious.
Thank you.Very clear and simple. Thousands of videos about the installation of a sight to dream about it! Thank you!
This is actually really cool, I think Im gonna get these for my 10/22 because my elevation has to be cranked up to 300 yards to zero it at 50 so I have practically no elevation left to dial, and I like to shoot my 22 at 200+ yards.
Best rings on the market by far. I have these on all my rifles!
Ha Ha I found the video I needed. I had masive problems setting up my scope, used up all the movement on windage so fustrating, but bought the XTR Sig Rings and boom there you go back to full adjustment on my scope this vid may be 10 years old but its still stands true so thank you 👍
Guys, while I can't speak to the use of 1" and 30mm rings, I can on the 34mm's.
First thing I found is that the inserts are very compressible, as you tighten them down you'll notice a lot of squish. Not really what you want in a scope mount. If you torque them down correctly to Burris' specs, you run a good risk of scope malfunction or even permanent damage as I experienced. In a 34mm ring, they don't provide enough solid support for the scope tube (prevent the tube from becoming egg shaped) when it's properly torqued. Torquing these rings to Burris' specs resulted in a ruined Burris XTRII scope. Fortunately Burris was very good through the process and replaced my scope as well as set me up with solid rings which immediately fixed my issue.
Below is a link to the video I put together for Burris showing the torque procedure and problems I experienced.
th-cam.com/video/Bx9xk2L3G2Y/w-d-xo.html
I know I'm late but that was an absolutely fantastically made and great informational video.
I have a scope mount problem on a K 98 Mauser. The scope's minimum setting results in POI that is 30" high at 100 yards. Would this system correct the problem?
This is a great system for air rifles and air soft rifles .
It will work with real guns too.
Thanks for this video. My no4 enfield was shooting high and I now understand how to alter my burris inserts to bring shot lower. Many thanks nick.
Are the ring sets available with extensions?
Quá hay.
Love burris posi align
Video starts at 0:35
Nice deer mount!
Does anyone know if these zee signature rings can withstand the recoil of a 12 gauge slug gun?
DRD OUTDOORS absolutley! I have them on and all my magnum rifles from 300 ultra mag, to 375 H&H with no problems at all.
@@preacherbiggindo I need to get inserts for my Z series 30 mm rings?
These rings are awesome. They saved me from scrapping an action that had .020 misalignment in the scope base screw holes in relation to the center of the bore. Dont sound too bad but at 100 yards it left me around 2moa remaining of windage to the right. After debating what to do i found these rings!i returned the scope to optical center via homemade jig. I played with the inserts and orientation while boresighting at 50 yards, torqued them down, took a first shot at 100 yards....i was exactly 1 inch low and 0 windage adjustment was needed. They are worth every penny in my book!.
What about the mounting system why don't you show the way you put the rings on the mounts or anything about the two screws that adjust on the rear mount? Signature ring inserts my ass how about some signature electrical tape!
Why does it seem like this video was shot in the 1980s?
Because it was.