I have a query won't 1k surfacer (code #UCH210*) work instead of 2K epoxy primer (#2K04). I am planning to paint an item that is about the size of a finger and I don't want to spend double the amount on such a small surface. So I wanted to know whether I can achieve the similar results with 1K primer instead of 2K primer or there won't be any problems if I apply 1k surfacer (code #UCH210*) instead of 2K epoxy primer (#2K04).
its basically math is an answer to your question. 2 is better than 1. but if you want to experiment and combine it.. first use the epoxy primer then wait for 15 mins and apply the surfacer as the catalyst of your epoxy primer then leave it to rest for 2 hrs then sand. for smaller size of surface to paint? its better to use 1k plastic primer for plastic but if you will going to use a 2k epoxy primer on a small surface i will not recommend it because once you activate the hardener you must empty the can because it has a duration for 8hrs only. You'll never gonna use it again because the paint with hardener activated takes only 8hrs
surfacer is a primer that was able to be coated for base unsanded... but to achieve glossy or mettalic finish youll need to sand it from 600-1000 grit. metal epoxy, epoxy and plastic primer needed to be sanded then apply surfacer to be its catalyst.
Boss surfacer at primer Pareho lng ba
I have a query won't 1k surfacer (code #UCH210*) work instead of 2K epoxy primer (#2K04). I am planning to paint an item that is about the size of a finger and I don't want to spend double the amount on such a small surface. So I wanted to know whether I can achieve the similar results with 1K primer instead of 2K primer or there won't be any problems if I apply 1k surfacer (code #UCH210*) instead of 2K epoxy primer (#2K04).
its basically math is an answer to your question. 2 is better than 1. but if you want to experiment and combine it.. first use the epoxy primer then wait for 15 mins and apply the surfacer as the catalyst of your epoxy primer then leave it to rest for 2 hrs then sand.
for smaller size of surface to paint? its better to use 1k plastic primer for plastic but if you will going to use a 2k epoxy primer on a small surface i will not recommend it because once you activate the hardener you must empty the can because it has a duration for 8hrs only. You'll never gonna use it again because the paint with hardener activated takes only 8hrs
Asir good morning po pwede ba gamitin sa alloy frame MTB ang uch210 for primer
Pwede po sa alloy..
better to use metal epoxy primer since it is a metal.
@@athenazoey5093 mali alloy ehh gagamitan ng metal primer
Boss parehas lang ba na pwede gamitin pang primer yan?
Kuya unsay affordable na primer para sa hub?
Boss pwedi ba uc210 sa cover ng motor ko?tinaggal ko kasi lahat ng old paint,kakapit kaya yun?
pag ung 2k ginamit sa metal, hindi na po mag chip off?
hi, do you mean I cannot reuse the surface primer after 10 hours? i cannot re spray it on other stuff?
once you activate the can by pressing down the red button, the paint will expire after 8-10 hours. so you can no longer use it
,
@@johndavecabiling4390 if he was refering to 2k series paint, then yes
but for the surfacer, No
Yes. Mine just got wasted in 3hrs.
Fuck i sprayed only 2 minor sprays and wasted my money.
I going to sue the company for this.
yung 2k04 po ba hndi na pwedeng gamitin ulit pag may tira?
8hrs duration
Pwede ba yan 2k04 sa Stainless na bakal? Pang pintura ko sana sa crash guard stainless ko.
Uch and uc y113 id the same??
Both the same under primer category but the color is not. Uch210 is gray color while ucy113 is silver.
Add ko na rin po, UCU19 and
UCY113 is for metal.
@@jcdavid1113 and another addition is Surfacer can be coated unsanded
Hi ano ang mas preferred ninyo para sa mga may mga dents or malalamin na gasgas na farings, 20k4 or Putty Primer? Salamat ❤️
putty primer is equivalent to bodyfiller youll have to sand it to be flat then use surfacer then sand it again.
Ano po magandang primer sa mugs sir
KUYA PWEDE BANG GAMITIN ANG US H210 NA PANG PRIMER ?
Yes po. It's one of the primer coat.
@@davaoon-roadmotovlog6485 kusi nag paint ako nag chasis ko yan ang gamit ko hehe
@@novemjohn9698 uch210 is good for metal and plastic surfaces plus its affordable. However, if you have enough budget, 2k04 is superior.
@@davaoon-roadmotovlog6485 maraming salmat po kuya hehe :)
send ko po sayo yung picture ng motor hehe
ok lang po ba n gamitin ang uch210 primer pra sa mga 2k paint tulad ng 2k07 2k08
surfacer is a primer that was able to be coated for base unsanded... but to achieve glossy or mettalic finish youll need to sand it from 600-1000 grit.
metal epoxy, epoxy and plastic primer needed to be sanded then apply surfacer to be its catalyst.
@@athenazoey5093 pagkatapos po bang e spray yung uch, pwede na po deretso sa main color? Tapos final coating na?
Delikado yata buksan yan.. salamat
mas delikado pag kinalog tapos na bagsak..may tendency po na mag recoil sya
Papspwd bng gamiting primer yan sa chassis ng motor paps??
Pwede
sir tanong lng gaano po karami laman gaano po mapapaint nyan?
It is good for 2 to 3 coats of Ring 17- 2 MC Mags for 1 pc of uch210 or 2k04. 👍👍
lods yung uch210 ba pag nagamit mona at my natira masisira ba ang natira? o pwede pang gamitin ulit ?
Pwede png gamitin unlike sa may hardener
First