New holland workmaster 50 no start issue , here’s what I did to fix the issue

[@vanessaphillips1056]

Thanks for posting this! Got mine fixed with your help!

[@dakotafarmshayandcattle1865]

Glad I could help!

[@philO689]

Same situation I found myself in today, the right rear taillight assembly is the culprit for me. Blew two 10a fuses, replaced it with 15a (all I had left) got it to the barn and the taillight assembly was smoking. Ta-da, hope this helps!

[@dakotafarmshayandcattle1865]

So far my tractor hasn’t had anymore issues since that day I hope it stays good for a long time

[@Quicktrigger1964]

I just had the same problem, my New Holland TC40D. All I had to do was replace a 20 amp fuse behind my gauge.
Cluster.

[@dougirwin3053]

I have a New Holland Tc45da with a cab and am having similar issues with starting. When turning my key on the pto light says it’s engaged, i tap it backwards and tractor will usually start. BUT….. Not every time and i end up blowing a 15 amp fuse almost in same location under key ignition.
Could it be the wiring from the pto safety switch to the fuse box?
Also, if it’s warm outside , it usually fires up. Thoughts? Thanks for any help you can give!!!

[@jamesgould6001]

Got any idea why I keep blowing the starter fuse when I turn the key on? No dash lights or nothing come on!

[@dakotafarmshayandcattle1865]

Sounds like you may have a short circuit somewhere , check behind your dash there is a electrical box called a flasher unit that could be bad , that’s what happened to me and blew some of my fuses

[@jamesgould6001]

okay thanx. will take a look

[@willsmith475]

So the question is why did the fuses blew?

[@dakotafarmshayandcattle1865]

I’m honestly not sure so far I have not had any more issues out of that tractor

[@jgerard4719]

I can't find my fuse box on a NH tt60a...

[@dakotafarmshayandcattle1865]

I’m not sure where the fuse box is on a tt60a