วีดีโอ

do you have part numbers for hydraulic filters and fuel filters ?

Dipstick location?

I'm looking at the workmaster 120. This is the same tractor just hp difference. I get to see it in action. Great content.

that oil jug looks suspiciously similar to Rotella T5 :P

I have a New Holland Tc45da with a cab and am having similar issues with starting. When turning my key on the pto light says it’s engaged, i tap it backwards and tractor will usually start. BUT….. Not every time and i end up blowing a 15 amp fuse almost in same location under key ignition. Could it be the wiring from the pto safety switch to the fuse box? Also, if it’s warm outside , it usually fires up. Thoughts? Thanks for any help you can give!!!

What’s the part number for fuel filter and hydraulic oil filter ? Workmaster 60

Looking for water separator on my workmaster 70? Any help?

Thanks for posting this! Got mine fixed with your help!

Good video. what are the part numbers for filter?

Go with a kubota or krone....definitely stay away from new holland.....too heavy and very poor design

Heddings Farm TH-cam

What did you make your monitor hot off of inside the cab. Got the same tractor and monitor. But couldn't figure out how to get a wire ran from battery to inside cab with any holes. Thanks

The one I have is a bugger to hook to the tractor!

I am stuck in low range and cannot shift out of it. I am stopped, have the clutch in and it just wo t shift

I just had the same problem, my New Holland TC40D. All I had to do was replace a 20 amp fuse behind my gauge. Cluster.

My kuhn mgd 600 has a stand built into it

I can't find my fuse box on a NH tt60a...

I have a workmaster 70 and im pretty sure theres only 1 drain plug. Good video, theres surprisingly little info online about the workmaster 50,60, and 70

Year since this video, curious to know your thoughts now. And how's the noise on the highway?

Same situation I found myself in today, the right rear taillight assembly is the culprit for me. Blew two 10a fuses, replaced it with 15a (all I had left) got it to the barn and the taillight assembly was smoking. Ta-da, hope this helps!

Love this time of year

Good video! I bought this exact caddy after you reviewed yours last year. I love it! It's on an old 275 John Deere 9' disc mower. I actually did not look forward to cutting hay just because the mower was so hard to hook up and unhook! Now, I love mowing hay.

Nice job. Good luck

Great video. I have no use for a caddy like this, yet I really enjoyed the video. Well done! When you go to lengthen that pull rope, may I suggest you add a small rope pulley to that steel rope loop (at the 2:00 mark). It'll make it pull a whole lot smoother and easier, plus it'll extend the life of the rope quite a bit. Just a thought. That caddy looks to be one quality built piece of equipment. Thanks for sharing. Be well.

Our first Wheel Rake was a New Holland, The third year we sold it and a Close friend bought 4 SiITREX 10 Wheel rakes in Crates off which we got rhe 2 red ones and he tool the 2 Green ones.... New Holland Rakes are Manufactored by Sitrex.... Only difference is Color....

Being as we Row cropped Peanuts we were familar with Kelly Manufactoring Company, Diggers, lifters. and Combines, So we went with the 4760 model, We have from the 2nd year in the Commercial Hay had 3 Krone 320 Easy= cut disc mowers and 1 3200 trail..... At First ours had the Hydraulic option, buty we changed over to solid Mount... Your channel just popped up .....

I absolutely love mine

That is really helpful to walk through. I'm going to look at a used Stony Point caddy this weekend. I am interested in saving the wear and tear on my tractor and avoid the pain of hooking that implement up. It is by far the dumbest engineered 3 point implement in terms of hook up!

So the question is why did the fuses blew?

The three pin plug is just 12volt auxiliary power

Read the side wall 1+2+2 doesn't equal 10 ply

I bought a caddy just like yours. Getting excited to use my JD 275 9’ disc mower with this caddy. Great video!

As far as mowers all I will use is a Kuhn. Do yourself a favor and Sit the bar on some 6x6 pieces of wood when you unhook. Get the bar off the ground.

Don't forget there's 2 compartments on the hinge gearbox for oil

Thank you! Just bought an older JD 275 and have to do this. Your video was most helpful!!

How often do you have to blownout the radiators to keep the AC cool? Have you ever had the hydraulic fluid overheat from running that baler all day?

Thanks man. Dealing with gelled fuel right now and im about to tear into it! No one makes videos for these dang tractors, new holland needs to step up their game and hire you !

You have a part number for that power shuttle filter? I'm having trouble finding it.

Would you mind telling me what the cost is of this?

Merry Christmas 🎄

I wonder how often he changes the dirt on the engine? 🤔

How are the tires holding up?

I was just going to ask about a Krone when you just mentioned it :) .

I have read the nuts that hold the pods together can vibrate loose so if you ever take em apart it may be a good idea to loctite em. Hows that workmaster treating you? Did you add the optional lift cylinder on 3point?

Congrats on the new mower, looks like it's going to work well and hold up over time.

Congrats! That's the one I saw leaving Foshee's the other day - looks like Logan hooked you up. Looking forward to seeing how this thing serves you, we're going to be looking for a second cutter next year and have considered one.

I saw your new cutter leaving on a trailer yesterday not knowing it was yours until I saw the post on Instagram. Congrats on the new mower! We run a Vermeer M8050 and have good luck with it, but there's something to be said for having a local dealer to run to when you need a part quickly. We have to go to DeQueen from Murfreesboro to pick up parts for ours so I understand your concern regarding the Krone.

I'm thinking Kubota which I think is actually a Vicon. But probably another Kuhn which is a good mower too. Probably both be wrong and you'll go with New Holland! 😂

Krone is a really good mower

How much was this?... i have a nh 6060. But i prefer yours. Too much electrics for me is more things to go wrong in the long run. Is yourd made in the USA?