Oh my god, I just found this guy like a week ago and basically watched all his videos. Now I'm watching a supercut of all the videos I've watched in the past week. Neat
Carl, I’m a retired electrical engineer who went into technical sales right out of college, and even sold pcbs about 25 years ago between other better jobs that actually required an engineer. I love watching your videos and your “drive” to discover new knowledge. I was wondering what country you are in? Best regards and stay safe.
Great Video Carl thanks Question - If I want to make a few flexible PCB is it possible to use a stencil printer. And how would you hold down the flexible PCB and do the accurate positioning.
I'm looking in the future how I can make a, usb c and micro male plug with a robust flexible pcb board and on the other side usb c that I can connect a thin power bank to a device that has a slowest profile possible. 🤔
Is it possible to create a coil gun with PCB? Maybe stacking the PCB with coils in layers and have a hole in the middle so it's also creates the barrel?
Hey Carl, LPI (liquid photo image) or DLP (direct legend printing) silkscreen would probably provide better resolution and quality. It is more expensive, however, and I’m not sure if PCBway has that capability or not.
if your problem is battery weights then why dont you use emf for your flappy/jumping flex board i mean attach small emf board and provide voltage throught emf pad
Great video. Interesting. I would like to see more videos like this because I am going to make my first flex PCB for a mechatronic hand. Meanwhile, I suscribe to you and activate the notifications. Greetings from Mexico.
Sharp corners let the electrons fall out. Well, that is for high frequency circuits, but it is a good idea for keeping segments from becoming antennae for all the noise in the environment when you haven't shielded the circuit. Solder to flex with low temp paste and use a controlled temp hot air blower to flow the solder and for if you need to de-solder.
Flex PCBs change the impedance line? Lets say I want to create a BLE device and use a Ceramic Chip Antenna. Can I use a flex pcb for that and connect the Antenna output from MCU to the impedance matching network and then to the ceramic chip antenna and this will work when bending the flex pcb board around the 3d package? Also, can I weld components in both sides of the Flex PCB?
can you publish a step by step of creating a Rigid Flex using Altium? The flex part in Altium 21 is so confusing. I wish Altium would go back to AD18 rigid flex
Hi Carl, Thank you for the content. Can you share the folding experiment's results ( around 3:26 ), what was the effect of totally folding the Flex-PCB on resistance?
HI mate, I'm looking for tutorials about Flex PCB and i found you. Thanks for the video! I'm planning to make a new Flex PCB for my two Tektronix Tds series Oscilloscopes. Any tips mate? Thanks
Great Video! Does adding the stiffener cover everything beneath it? For example if I placed it over several through-hole pads I need to solder pins to would that be possible? Thanks!
what would you think about a foldable motherboard for a computer... i want the PCIE slot for the GPU separated from the CPU by a fold. debating if the Ram should be on the same section as the CU or the GPU or even on a third divide... i want the motherboard folded around an aluminum heatsink and maybe even the cable management with a large amount of airflow through the center of it. any thoughts?
Motherboards are very complex circuits with lots of constrains. It has many layers with different porwer requirements, shielding from EMF, limitations of parallel lines having same lenght with different paths and complex connectors. I would not say that it is impossible, but you'll have to be an amazing designer or have an amazing designer working for you. Other then that, you will spend a lot of money and time in development until having the product. Good luck with your idea.
Bugeja, I suggest you to explore intelligent PCBs: several regions with electromagnetic coil actuators and several hinges to induce FOLDING and stabilise a dynamic origami structure. Do it now, or else we will be reading about it in a couple years because some MIT engineers. If someone has to do it, I prefer you to be the one. I could design some structures if you want
Oh my god, I just found this guy like a week ago and basically watched all his videos. Now I'm watching a supercut of all the videos I've watched in the past week. Neat
Me to bro 🤜
Thanks!
it would be interesting to try to build a tiny submarine robot using the flappy pcbs movement at a propeller like a fish tail.
you could use two so they alternately attract and repel. Doing it with one would be a bit of a mare.
he already did it
The flexible circuit board is very good.
@@gordonlawrence1448that would be terrible for the fluid dynamics however
Your video and audio quality has dramatically improved in the past year. Great job!
And now I have one more thing to try out! Thanks for the informative video Carl!👍
Carl,
I’m a retired electrical engineer who went into technical sales right out of college, and even sold pcbs about 25 years ago between other better jobs that actually required an engineer. I love watching your videos and your “drive” to discover new knowledge. I was wondering what country you are in?
Best regards and stay safe.
thank you so much! :) I'm from Malta Europe
I loved watching that robot with the 4 coils moving about.
A lot of learnings in a single video.🤩
I love how you are uploading Vedio quick than before i love watching your Vedio and i getting inspired for electronics
Your video came just in time. I'm currently designing flexible PCB for my Fl3xWatchOLED project. Thanks!
Great info, thanks!
Next generation👍
Great Video Carl thanks
Question - If I want to make a few flexible PCB is it possible to use a stencil printer. And how would you hold down the flexible PCB and do the accurate positioning.
That's something Useful! Thanks!!!
Great bro u made things open for everyone ☺️👍
I'm looking in the future how I can make a, usb c and micro male plug with a robust flexible pcb board and on the other side usb c that I can connect a thin power bank to a device that has a slowest profile possible. 🤔
How to flex your talent:
Dude i love your videos
very good tips & tricks
Is it possible to create a coil gun with PCB? Maybe stacking the PCB with coils in layers and have a hole in the middle so it's also creates the barrel?
Nice video, well done, thanks for sharing it with us :)
Hey Carl, LPI (liquid photo image) or DLP (direct legend printing) silkscreen would probably provide better resolution and quality. It is more expensive, however, and I’m not sure if PCBway has that capability or not.
Hah that shirt, genius.
if your problem is battery weights then why dont you use emf for your flappy/jumping flex board
i mean attach small emf board and provide voltage throught emf pad
@DIYPerks Matt ! With all the coolness you crate? There has got to be something here to inspire you! Maybe even a collab!
Great Video!
Thanks Carl, you're so nice 👌🏽
Great video. Interesting. I would like to see more videos like this because I am going to make my first flex PCB for a mechatronic hand. Meanwhile, I suscribe to you and activate the notifications. Greetings from Mexico.
Sharp corners let the electrons fall out. Well, that is for high frequency circuits, but it is a good idea for keeping segments from becoming antennae for all the noise in the environment when you haven't shielded the circuit.
Solder to flex with low temp paste and use a controlled temp hot air blower to flow the solder and for if you need to de-solder.
New subscriber of the channel love from Bangladesh 🇧🇩🇧🇩🇧🇩
Is it possible to use the flexible PCB to create your own set of strain gauges?
Have you tried adding ynvisible displays to your stuff?
Flex PCBs change the impedance line? Lets say I want to create a BLE device and use a Ceramic Chip Antenna. Can I use a flex pcb for that and connect the Antenna output from MCU to the impedance matching network and then to the ceramic chip antenna and this will work when bending the flex pcb board around the 3d package? Also, can I weld components in both sides of the Flex PCB?
Just wondering if it's possible to build an electronic venus fly trap?
can you publish a step by step of creating a Rigid Flex using Altium? The flex part in Altium 21 is so confusing. I wish Altium would go back to AD18 rigid flex
Hi Carl,
Thank you for the content.
Can you share the folding experiment's results ( around 3:26 ), what was the effect of totally folding the Flex-PCB on resistance?
HI mate, I'm looking for tutorials about Flex PCB and i found you. Thanks for the video!
I'm planning to make a new Flex PCB for my two Tektronix Tds series Oscilloscopes.
Any tips mate?
Thanks
Great channel and interesting projects.
Have you ever considered origami PCB's? That way you can fold the PCB into its own 3D structure.
Hello, do you know sputtering processo, like DIY? It's possible to do a sputtering do manufacture LCDs monochromatic?
There is a channel where a guy makes his own ICs. If you can make ICs you can make LEDs.
@@gordonlawrence1448 th-cam.com/video/IS5ycm7VfXg/w-d-xo.html
Was that cold solder 😣😣
thx bro this was really helpful . 😎😁
I see what you did with the "Weird Flex But Ok" shirt :P
Verry nice. 🥰❤
Help me out folks, what does he say at 0:14 "...needs to flexible, or ________________"
I cant understand what word he is saying there.
Great Video!
Does adding the stiffener cover everything beneath it? For example if I placed it over several through-hole pads I need to solder pins to would that be possible?
Thanks!
what would you think about a foldable motherboard for a computer...
i want the PCIE slot for the GPU separated from the CPU by a fold. debating if the Ram should be on the same section as the CU or the GPU or even on a third divide... i want the motherboard folded around an aluminum heatsink and maybe even the cable management with a large amount of airflow through the center of it.
any thoughts?
Motherboards are very complex circuits with lots of constrains. It has many layers with different porwer requirements, shielding from EMF, limitations of parallel lines having same lenght with different paths and complex connectors. I would not say that it is impossible, but you'll have to be an amazing designer or have an amazing designer working for you. Other then that, you will spend a lot of money and time in development until having the product. Good luck with your idea.
Wow 😍
which is software ur using ?
altium designer (link in the description)
I do love the T-shirt
Nice 👍😊
Bro please make pcb drone 🙏
yes
Hyy sir please help me plz Ripley 😢
At this point your basically flexing your flex pcbs
Get it ? 😂
hah nice
What do you design your flexible circuits?
That thumbnail is breaking my brain for some reason...
The more appropriate title would be “ things to consider and mind while designing flexible PCB circuits “ good work though 👍🏻
which is the smallest dron that you have ever seen? is there any kind of Guinness World Records for this?
Bugeja, I suggest you to explore intelligent PCBs: several regions with electromagnetic coil actuators and several hinges to induce FOLDING and stabilise a dynamic origami structure. Do it now, or else we will be reading about it in a couple years because some MIT engineers. If someone has to do it, I prefer you to be the one. I could design some structures if you want
if it has six legs, you can name it a cricket robot.
please do a altium designer NOOB GUIDE to HERO
nice shirt
Weird flex but ok ! :)
🖖 👍
Hi
Do you have any job for me?
2:55 _dies_
Weird flex 😂
More info about tiedowns th-cam.com/video/FAgGQe5jdek/w-d-xo.html
intonation is very monotone
I sawu on tv on gadgets idkwhy I told u again sorry
😶👍
🇱🇰👈
Weird flex but ok
Зачем нам твое лицо - ты девайсы показывай, бесполезное видео