Good afternoon. I am interested in the rope-laying machines that advertise in this video. I'm from Kazakhstan. Where can I order them. There is no representative office in Kazakhstan.
Hello Nidhin, it is not possible to create an enclosed rope guide for multi-spooling drums. This rope guide is suitable for single layers only. However due to the clever patented design, it is possible to create a rope guide for virtually any brand or make of hoist! Please contact your local Konecranes/Demag representative for more information. :)
There rope guild is not as easy as they say when you're in the air in a lift , note they show you repairs on the ground that's not where it is when you work on it , the rope guild needs a lot of lubeorcation or it wears and don't work good in steel foundries or cement founders or where there's dust build-up they don't tell you
An awful, cheap to make, expensive to buy, replacement of the old cast design. Quick to wear and requires regular adjustment to keep correctly fitted to the drum. The rollers can't be brought as spares parts.
@@flytrapjohn 100% agree, the old iron ones are top tier... 2 bolts with springs and one big spring to wrap around the drum. This one is a mess, absolute pain to install... and dont even come with "multi use" parts... they send a few cheap pieces of crap metal to help configure to ur needs.. but it screams add-ons which is now 3rd party modifications which is against the fking law
Good afternoon. I am interested in the rope-laying machines that advertise in this video. I'm from Kazakhstan. Where can I order them. There is no representative office in Kazakhstan.
Does it use on container yard RMG/RTG?
Hi , I am writting from Angola, I would like to know if Konecranes have online courses about cranes.
Yes they do
is it suitable on multi layer spooling drums ?
Hello Nidhin, it is not possible to create an enclosed rope guide for multi-spooling drums. This rope guide is suitable for single layers only. However due to the clever patented design, it is possible to create a rope guide for virtually any brand or make of hoist! Please contact your local Konecranes/Demag representative for more information. :)
No
Boa tarde consegue adaptar nas talhas da Demag
The universal rodguide can be applied to P Hoist type Demag units, and DH Hoist type units.
Nice!
There rope guild is not as easy as they say when you're in the air in a lift , note they show you repairs on the ground that's not where it is when you work on it , the rope guild needs a lot of lubeorcation or it wears and don't work good in steel foundries or cement founders or where there's dust build-up they don't tell you
An awful, cheap to make, expensive to buy, replacement of the old cast design.
Quick to wear and requires regular adjustment to keep correctly fitted to the drum.
The rollers can't be brought as spares parts.
A lot easier to work with then the old cast Steel two-piece and spring try soap grease
@@flytrapjohnsorry boss you bought it is European
@@flytrapjohn 100% agree, the old iron ones are top tier... 2 bolts with springs and one big spring to wrap around the drum. This one is a mess, absolute pain to install... and dont even come with "multi use" parts... they send a few cheap pieces of crap metal to help configure to ur needs.. but it screams add-ons which is now 3rd party modifications which is against the fking law
good
i can produse cheapest hoist
Please share your number
Ok
Do not buy these they are absolute rubbish very flimsy and cost a fortune