We Made A Huge Mistake...Crazy Epoxy Fail!
ฝัง
- เผยแพร่เมื่อ 16 เม.ย. 2022
- www.amazon.com/shop/triplelru...
In this video, Zoe is pouring 14 Epoxy projects in the Crafted Elements silicone molds. We made a huge mistake and had something crazy happen with the epoxy!
- For any questions, you can email Zoe at: Zoe@TLRDS.com
-Come see us at The Fancy Flea Market!!!
April 22-24, 2022
9am-4pm
Strawberry Festival Grounds
2866 Reynolds Street W. Plant City, FL
www.fancyflea.net
- Shop Crafted Elements silicone molds here.
**** USE OUR DISCOUNT CODE "TLRD10" AT CHECKOUT! ****
craftedelements.com
- Mail Us Your Company Stickers!
Triple L Rustic Designs
4812 Bruton Rd
Plant City, FL, 33565
- Shop Brunt Workwear here:
bruntworkwear.com/products/th...
Purchase ICE EPOXY Here:
3 Gallon 2:1 Kit - www.triplelrusticdesigns.com/...
1.5 Gallon 2:1 Kit - www.triplelrusticdesigns.com/...
1 Gallon 1:1 Kit - www.triplelrusticdesigns.com/...
Total Boat Epoxy:
www.totalboat.com
Ol Loggin Epoxy:
www.ollogginepoxy.com/shop-epoxy
Epoxy Mold Release Spray:
amzn.to/391ItF3
Follow us on TikTok!!
/ triplelrusticdesigns
*********************************************************
Triple L Rustic Designs Partners!
LA Cutting Products - Sawmill Blade Source
lacuttingproducts.com
Wade’s Tree Service
(813) 707-3169
Barking Up The Right Tree Service
(910) 934-6181
Nyle Systems
For any questions about the lumber kiln, please contact Nyle at (800) 777-6953
www.nyle.com
www.nyle.com/kiln-drying-syst...
Wagner Meters
For any questions about the Orion 950 Moisture Meter, please contact Wagner at 844-845-6180
www.wagnermeters.com/wood-moi...
Starbond
Score a steal of a deal on any Starbond CA glue and get 10% off any and all Starbond products by using exclusive offer code “TRIPLEL10” during checkout at the Starbond store here:
www.starbond.com/?rfsn=649792...
*********************************************************
Be sure to follow our Instagram accounts!
zoe_anne_?...
/ triplelrusticdesigns
/ homebetweentheoaks
Triple L Rustic Designs Etsy
www.etsy.com/shop/TripleLRust...
Our other TH-cam Channels
Home Between The Oaks
• Why We Planted 2,120 T...
Kristy Larson
• Triple L Rustic Design...
Have a question or want to reach us? Shoot us an email!
Trey@TLRDS.com
Zoe@TLRDS.com
Larry@TLRDS.com
TripleLRusticDesigns@hotmail.com
www.triplelrusticdesigns.com
Camera Gear Used
Sony A7Siii - amzn.to/3tppCsE
Sigma 24-70mm F/2.8 DG DN Art - amzn.to/2Q3Lqf0
Vortex Summit Carbon II Tripod - amzn.to/3a8rbUc
Rode Wireless Go II Microphones - amzn.to/3sdRej6
ProGrade 256GB SD Card - amzn.to/3sm3Btr
DJI Osmo 3 - amzn.to/3mCvZon
Iphone 12 Pro Max - amzn.to/37CeGze
GoPro Hero 8 - amzn.to/34wEsmF
Phone Tripod - amzn.to/2WzzNfv
Epoxy Tools
Epoxy Scraper- amzn.to/3MdSNYu
DeWalt Polisher- amzn.to/3zfYQVJ
Odies Oil - amzn.to/2VMmlrM
Dewalt Sander - amzn.to/3CjrG9x
Polishing Compound - amzn.to/2VNnRKd
3M Pads - amzn.to/2XouaV0
Sawmill Accessories
Wood Mizer Cant Hook - amzn.to/2LOhq49
Wood Mizer Double Hard 4 degree blades - amzn.to/3paoWVz
Wood Mizer 10 degree blades - amzn.to/3aqJhlm
Saw Service Of Washington - www.sawserviceofwa.com
Shop Tools
DEWALT Drills - amzn.to/3nGutmo
Festool TS 75 Track Saw - amzn.to/2KFjIlG
Festool Track - amzn.to/37Fw9XX
Kreg Jig - amzn.to/37B3Dqo
Base Camp dust mask - amzn.to/3q5T7xN
Mesh Sachet Bags- amzn.to/2PbFu2K
Cotton Sachet Bags- amzn.to/3se8yoM
Laguna Supermax Drum Sander - amzn.to/2XvSK6R - บันเทิง
![[UNCUT]"เศรษฐา" โดนบีบให้ลาออก เผยดีลลับ "ทักษิณ" ต้องต่อโปร ไม่งั้นเจอจุดจบ! I คนดังนั่งเคลียร์](http://i.ytimg.com/vi/XlH3k81dxmE/mqdefault.jpg)
Are we still pretending we watch this channel for the art? 100% the videos her husband does without her gets zero views lol
Why do you have to be a dick? They get decent videos on the ones that only have her husband also. But there’s nothing wrong with appreciating a pretty woman while learning and watching something be created at the same time.
Xd
Come on man. Lol
Yes we are 😂
Why can’t it be both? I want to learn about epoxy chakutery boards.
when you added part A to B its the hardener so even though un mixed it was setting off that's why you had a crust at the top which was pushed to the bottom to mix the rest. next time setup your part B in one container then part A in another and dont combine both parts till ready to mix and pour.. its just a simple error where you put the resin and hardener together and left it to sit.
Total Boat makes awesome products. Glad you figured out what went wrong. Good luck on future projects with total boat. Your epoxy projects are awesome, and very inspiring!
Always enjoy watching woodworking videos, especially from someone as easy on the eyes as Zoe, but this video where’s its quiet and she’s teaching us about epoxy just shows how smart and articulate she is as well! Also appreciate keeping it real by showing everything, even mistakes. Keep up the good work Zoe!
Zoe you and your husband build and make awesome projects, I really enjoy watching y’all build stuff, my wife is getting into this epoxy stuff too, I’ve got a few things for her to make for me, I cannot wait 😂 thank you for sharing your talents
Amazing work guys! Thanks so much for your continued partnership and love of our products as well. We appreciate you! As a side note, we are big TotalBoat users, it's just bad luck (or... Trey...) that the epoxy didnt get mixed right, but I can tell you first hand that the TotalBoat products are great and the team over there are stellar!
Thank you so much guys!
Oh no! For deeper mixes and pours, you will want to go with our ThickSet Epoxy or ThickSet Fathom Epoxy. Too much of the High Performance Epoxy was poured at once and left to sit too long which caused it to over heat and smoke. We recommend mixing smaller batches at a time and pouring the High Performance no more than 1/4" at a time. The rest look great and we can't wait to check out more of your epoxy projects. Feel free to reach out with questions about the different resins and their uses!!
Thank you for the response guys! Watching the video back, we had the ThickSet sitting right there next to the High Performance. I just chose the wrong one to use. Thank you for explaining what we did wrong! We look forward to making more videos with the Thickset! Thanks for everything guys!
Kann kein Englisch sorry
I’ve done that too!
@@sassafrasvalley1939??????
@@andfelix1 I only speak English.. I was replying that, “I had mixed the wrong chemicals too”.
Great video Zoe. Wishing y'all a very blessed Easter Sunday.
Love to see the videos where things go wrong. These things happen. Learning experience for sure.
Great video. Good to see other brand names. Happy and Blessed Easter to your family
Live and Learn :) Zoe and Trey, looks like a lot of work :) Keep up the good work!
Seeing her performance this show would never suffer a fail!
Ambient temperature will make a huge difference when the mix will kick off. We always experemented in a small cup before mixing big batches. And wearing a respirator, even out side might be a good idea.
Great video. Happy Easter to you and your family
Great video! Thank you so much for the shoutout guys 🙌🏻
Anytime brother! More to come in the future!
Excellent creative and extraordinary work...
Awesome I love epoxy work! Great seeing you guys cover this!
Many more epoxy videos to come!
@@TripleLRusticDesigns What are prices for such beautiful works?
When doing projects that involve epoxy resin I suggest you work with one mixed batch at a time. Measure Part A and part B, mix the two parts together and pour before you start another batch. That way you don't let time pass and let the unmixed parts sit in the container. That will almost always cause issues like with your Total Boat batch. Following your channel all the way from South Africa and enjoy your projects. All the best at the market.
Zoe… those boots are gonna make a huge difference! I can walk all day in mine… can’t hardly make it across the driveway in my rubbers!
Amazing work!
Great video Zoe and Happy Easter to you! Seeing you is always a treat or even a holiday! And even as time passes where you're expecting you'll become even more BEAUTIFUL ZOE! Thanks again for sharing your videos with us along with your time and effort to get the BEST FOOTAGE!
projects turned out great
Yoga Pants!!!Yoga Pants!!!Yoga ,Yoga,Yoga Pants!!!!!!!🤟😎👍👍👍👍👍👍
Yep, I’ve done that before too! Mixed my resin a little too hot for a fiberglass project because I was impatient and it did the exact same thing. Super hot, cracked as it dried, smoked, thought it was going to warp or melt the mixing jug 😂😂😂 good times!
Good work and looking lovely
Dayumn she is smart.. yeah send me a big 'ol package of thousands of dollars worth of epoxy. you too can get a permanent advertisement in our videos.. thats a great deal for both people I love the ingenuity!!
Greetings from KSA,
Nice projects, and well presented 😁,... Super 👍
Baby bump. Can't wait
Great idea the products your making is there any smelly fumes from the epoxy your not wearing a mask
Congratulations on your first market 👏🏻👏🏻👏🏻 this was a good video even with the mistake don't worry it happens to everybody. Keep up the good work 👍🏻
I would give some thought to wearing eye protection when pouring and mixing product. Not sure if there is a toxic off gassing component to your products but my experience with fiberglass would also consider respiratory protection be used.
Happy Easter love the vids and fits more 😅
Zoe saludos, igualmente a todo tu magnífico equipo de trabajo, desde México...
Happy Easter 🐇
Happy Easter Zoe from Warren. Nottingham. England.
It's funny I just watched your latest video and was wondering how you got the epoxy out of the mold and low and behold here it Is
ZOE is gorgeous and that is a compliment
About the total boat once u put a and b together you have to mix it and use it but read the instructions before using it. 👍😎🇵🇷
Wow just saw y’all’s episode on 100 days Dream Home. How cool.
The ending!
Good job speaking here from Brazil!
I saw total boat on Jimmy diresta videos and ordered and used it. Worked perfect.
están lindos tus trabajos this Nice You works 😀😙😀😀😀
The resin for total boat you used is for a laminating resin. It should be mixed immediately and used as soon as possible to avoid what happened in small batches.
What you had was a runaway exothermic reaction. With resin, it not only generates heat as it cures, but it also cures faster as it gets hotter (something you'll notice in winter when it cures slower and summer when it cures faster). Deep pour resins have a slightly different chemical makeup that makes it cure extremely slowly (24 hours to a week) while laminating resins can cure within an hour to aid in its intended use, laminating.
You mixed a large batch of laminating resin (not advised) then set it to the side (very not advised). because resin generates heat as it cures and there was such a large amount of it, the resin generated heat as it does when it cures, which made the whole batch hotter, which made it cure faster, which made it hotter, which made it cure faster, which made it hotter, which made it...........
Tadaaaaaaaa! Runaway exothermic reaction 😐 Welcome to the club, everyone who has used resin has had a runaway reaction at one time or another 😝 Deep pour resin avoids this by curing slower so it generates less heat which reduces the chances of an exothermic reaction, thats why it can be poured +2" thick. Laminating resins are meant to be poured 1/16 -1/8" thick MAX.
EDIT: Just saw you guys figured it out down the line 😁
Thank you so much!!!
if you ever used epoxy for model building this is how it goes. I sealed two engines with model epoxy....
I have been using Total Boat products for years. Great company.
I like anything to do with wood. I heat my house with firewood which I cut myself. I'm making some small furniture with my chainsaw and always been interested in doing projects with epoxy. learning alot. We all know Trey's a lucky man to have a beautiful wife like Zoe.
all i can say is that she is triple awesome
You guys should try FGCI epoxies. You might know the name SuperClear or Liquid Glass. Great product and they are pretty local, in St. Petersburg.
We used Super Clear once. We would be interested in talking with them about a partnership
Best of luck to you guys during the upcoming show. I hope your products are a big hit.
I hope you guys resolved the issue with WHAT HAPPENED on the "Total Boat" chemical mix.
Great video sharing
nice work
Lots of grandpas and mama bears out here watching over her. I know that you are watching over her too. You are a good man Trey. Course, to get such an awesome woman you should be. I know, I got my awesome woman 45 years ago! Blessings ya'll! Happy Easter!!!!
Awesome projects.. can't wait to see how they turned out. I wouldn't worry too much better the mishap. We all run into problems like that.. ive had the smoking resin, I've also put to much of one and not enough of the other... it happens. 1 tip I will share when doing projects with resin, you want to take a brush and do a lite coat on the side or top of the piece of wood before you put the rest of the resin in helps with bubbles and helps if the wood has a hole or soaks up the resin
Total boat is full of crap! the same thing happened to me when I bought their epoxy stay away from there products!!! I’m so happy you guys exposed this bs
Apparently you didn't watch the entire video. She figured out why it hardened so fast so I suggest you go watch that.
I need some of those molds.
I was wondering if you guys have attempted to make a large scale silicone mold? Roughly 4’x 8’ I saw the reusable hdpe video and was wondering which direction I should take on scaling one of these reusable molds. A large reusable silicone mold would be nice to ditch the fasteners but was just wondering if it would hold up well on a larger scale
No it won’t work. We have looked into it already with Crafted Elements. I would recommend building an HDPE one like I did.
I thought I might be dreaming too big lol Thank you for the input and I really like your guys work. That stihl saw is really nice too my slab guy has one it’s awesome to run
Please keep making these videos. Don't let the creeps upset you. Remember, it's their problem, not yours. It's nice to see informative content presented by someone so pretty instead of some stubbly faced grouchy guy. Haha. Just be careful around the chemicals.
Don’t be fooled. The slow motion zoomed in butt shots are not accidental.
My thoughts exactly!! I love woodworking and would learn from anyone but to get to learn from someone as cute and smart as Zoe is awesome!!
peach !!!!!!!
You had a exothermic reaction. You're lucky that cup didn't catch on fire. You needed to mix as you poured in part B as a good rule of thumb. Also you need to pick up a good set of weather gauges. Mainly thermometer & humidity gauges. 2 part epoxy is very sensitive to both. Pick a chart that's out there. Also DO NOT use the same cup for multiple batch pours. Older epoxy starting to flash off being mixed with new epoxy will go exothermic in a heartbeat! Next time you have a cup go off on you, throw it in a big bucket of water as soon as possible. N don't breath the fumes! Very nasty! We don't wanna loose the leggings! Lol
How do you guys clean the red mixer after stirring the epoxy? I typically wait for it to dry then peal it off but wondering if there is a better way.
That’s how we do it. Once it’s dry I break a small part free then use the air compressor and it blasts most of it off
Have a bucket of denatured alcohol and spin the mixer in it. Then I just wipe it off
@@billknoth3244 Nice, I'll give this a shot.
you two are good for each other and you always bush him lolol
How long does the molds last ??
best regards from germany. i like it to much nice.
bonsoir très belles réalisations petite question la résine que vous utilisez c'est de la résine classique ou de la résine spéciale alimentaire merci pour la réponse bon courage
She’s an artist
Cool
Will you have any of these boards for sale on line?
Yes but after the market this weekend
Happy to see you all thriving in this business. My wife and I are looking for homes in the St. Pete area. Maybe we will work together soon. BTW, I noticed the Slab Mizer. I was blessed enough to work with the guys who created it here in Indiana. Glad to see my input was put to use from the prototype to the finished product. Happy Easter!
ich könnte mir das jeden tag anschauen schade das ich in deutschland wohne macht weiter so
Translation--: I could look at it every day, it's a shame that I live in Germany, keep it up
Amazing Creations 👍👍
Wish I was in Florida, any of the items available for shipping? Thanks
Yes we ship epoxy and finished epoxy projects. Send us an email.
@@TripleLRusticDesigns is there a website to view all the items? Thanks
Hi and good, ya got rid of the white boots...
Te felicito saludos pura vida
Great vid! Are the fumes harmful to the baby? Careful with those chemicals.
the cross molde are you selling the cross after you make them on your website?
We will be making many of these crosses and selling them on our website after we finish the market this weekend.
Zoe, why did you place the TotalBoat sticker crooked?
Lol she says thanks for noticing
Fantastic video Zoe I hope the pregnancy is going well, you're sure looking good.
Where did you say you got your molds from?
Crafted Elements
schön mach weiter so
The other thing it was heating up because there's a chemical reaction just tossing in a 5 gallon pail of water it would have neutralized it
Perfect size shape and height.
I pour all day and can’t believe you did not vacuum out gas any of the batches
Are the measuring container a use once and toss out or can they be cleaned and reused
We tip them upside down and after the epoxy hardens, it can be peeled right out and the bucket can be reused
Work boot dont show up on the web site
Mixed hot. Shouldn’t have sat like that. The ratio is likely for something immediate. It’s really common in aircraft work for that to happen with a hot mix ratio. Not an epoxy issue
I think it is the wrong kind of epoxy. It isn't a hot mix it is a chemical reaction that causes the heat if you stir it up it stops the reaction but she let it sit too long between stirs.
I like your back door
you're getting to the point
for the ruined sample, take it to a range and shoot it as ballistics gel?
That’s not a bad idea!!
Greetings from Turkey
Good idea.
You just need to cut out some of the video that are repeats and do the whole video including removing from molds. I won't search out that video as it should be in this video.
what the hell Tray, you done messed up!
Haha drama must be created some how!
Wow 👏... your are good .your the one.
We all came here for the woods and err wood stuff, right?
Why yes of course. I assure you I have no other motives
Please wear the appropriate mask when spraying the mold release or anything else! The carriers in these products along with the chemicals are not good for you. Love the projects!
Wouldnt it make more sense to have the weights holding the wood down before you start pouring?
Yes but there’s a lot of things done for the video. You wouldn’t be able to see much if all the weights were on there first
I cant wait for your kids to see these videos
Why don’t you use a torch to get rid of the bubbles?
because it is in a mold and that is the backside.
@@eagleassets once the other side is polished can’t you see through to the bubbles?
@@levinef Fred the point I was making was the torch wouldn't matter the top was on the inside. as for seeing through I would say No they used a solid dark color. you didn't notice she did a slow pour to keep bubbles down on the inside and bottom of the mold (the front)
Thank you beautiful Lady 😘❤🌹
❤❤
Giggity