How to make headphone cable for Sennheiser HD 600 series

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 ส.ค. 2024
  • Available with different connectors for special orders! The headphone cable shown in the video is designed and assembled by KáCsa Audió, located in Budapest, Hungary. OCC silver conductor, 1.3 meter long (available in other length if needed), compatible with Sennheiser HD600/650/660 S headphones. Gold plated, alumiunium housed KáCsa 3,5 szereo Jack on source end, Cardas connectors on headphone end.
    More information here: bit.ly/3cMGJfr
    KCO-HPAg OCC silver headphone cable by meter: bit.ly/3arf4Pq
    Jack connector: bit.ly/3eLQFr6
    Flexible snake skin as outer jacket: bit.ly/3eLQFr6
    Stopper unit used for this cable: bit.ly/2VTaKmK

ความคิดเห็น • 19

  • @andresmall73
    @andresmall73 ปีที่แล้ว +1

    Ez a kialakítás jó a HD 25 modellekhez is, ami a DJ-k körében elég népszerű! Annyi, hogy ott eltérő hosszúságú a két oldal kábele! This design is also good for the HD 25 models, which is quite popular among DJs! It's just that the cables on both sides are of different lengths!

  • @ChriZd3luXe
    @ChriZd3luXe ปีที่แล้ว

    So you could make a nice, long and durable headset cable for the Sennheiser GSP500? There are absolutely no cables available right now. :(

  • @phylippusvonhohenheim3232
    @phylippusvonhohenheim3232 4 ปีที่แล้ว +1

    Excelente trabalho, fica realmente um serviço de alta qualidade

  • @visxi
    @visxi 2 ปีที่แล้ว

    Top Trabalho....e por acaso tem montagem de Din 5 pontas para 2P RCA

  • @Nosttromo
    @Nosttromo ปีที่แล้ว

    What's this tubing that contracts when heated called?

    • @kacsa-audio-hu
      @kacsa-audio-hu  ปีที่แล้ว

      It's heat shrinking tube. kacsa-audio.hu/en/webaruhaz/szerelesi-anyagok/zsugorcso

  • @Moreblood86
    @Moreblood86 3 ปีที่แล้ว

    you should put hot glue or not conductive silicone inside the cardas connectors after soldering, before putting the thermal restricting rubber. Otherwise those cardas connectors will gonna fail on the soldering spots pretty soon.

    • @kacsa-audio-hu
      @kacsa-audio-hu  ปีที่แล้ว

      We don't use hot glue, because in this case the connectors won't be reparable. Not often fail the assembling.

  • @asceticgod9665
    @asceticgod9665 4 ปีที่แล้ว +1

    Video is way too fast and headache.
    Can you show me how you soldered the ground cable?
    I'm still new to this kind of stuff

    • @BlazingPhoenixArcher
      @BlazingPhoenixArcher 4 ปีที่แล้ว

      There is a slow down video option under settings. That should help

    • @luisgrajeda4147
      @luisgrajeda4147 4 ปีที่แล้ว

      and a lot of diagrams in internet

  • @ttamas
    @ttamas ปีที่แล้ว

    i hate the jazz music. the work is perfect.

  • @maximianocoelho4496
    @maximianocoelho4496 3 ปีที่แล้ว

    I put two cables together with only a lighter and a knife!

  • @urielterry
    @urielterry 4 ปีที่แล้ว

    Which cable is Positive and which negative for te connectors? Does the smaller is negative?

    • @TheSuppressFurry
      @TheSuppressFurry 3 ปีที่แล้ว +2

      smaller pins are positive on the connectors.

    • @baccarah7010
      @baccarah7010 2 ปีที่แล้ว

      get a multimeter and check the ends for continuity, that way you can be 100% sure even if the strands themselves are already wrapped in paracord or are braided like IEM OCC cables

  • @xed530
    @xed530 3 ปีที่แล้ว

    How much for 4ft cable in dollars?

    • @kacsa-audio-hu
      @kacsa-audio-hu  ปีที่แล้ว

      this is 1,3m long (almost 4ft): kacsa-audio.hu/en/webaruhaz/kacsa-kco-hd6-35j-headphone-cable

  • @schlomoshekelstein908
    @schlomoshekelstein908 3 ปีที่แล้ว

    i bought my headphones in january and the fucking cable just went out. nearly 6 months of use wtf. fuck sennheiser