DT990 Detachable cable and other mods
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- A video showing the process we use to modify the beyerdynamic DT990 here at custom cans. There are probably some useful tips if you are looking to mod your own DT990s
we now have a kit with the foam and weights available here
customcans.co....
Or if you want some ready modded DT990 check out the link below
If you fancy buying some of our modified beyerdynamic headphones check out the link below
customcans.co....
We now also offer a send in service
customcans.co....
or if you want to buy the bits your self we used
Bitumin car sound deadening sheets for the bar across the middle
6mm adhesive lead for the back of the driver and 4.5mm for around the outside.
the socket used was a REAN RT3MP or if you are looking to go balanced the RT4MP would be the way to go
For wire - you can use whatever you have to hand or the original wire that was already in there but I would recommend no smaller than 26AWG and no larger than 20AWG for the best results
The music is
Ez Icarus - Slick Ghetto Story
![โฮ่ง! (SUGOI) - LYKN [ OFFICIAL MV ]](http://i.ytimg.com/vi/nFp4zjAARFs/mqdefault.jpg)
As someone who speaks German, i was so startled by that perfectly pronounced "Das ist gut" LOL
Dankeschön
@@CustomCans Bitteschön.^^
Ich hab genau diesen Kommentar gesucht 😂
Und ich dachte ich habe mich verhört
This just makes it SO much more convinient to use! I wish the authorized service centers did this. Because this stuff is scary to do by myself.
We offer a send in service but it is not the kind of thing most service centres would do. Drilling holes in customers headphones is risky ;)
jfunk.org/wpc/product-category/home/headphone-modding-service/
This type of video is probably my favorite. Modding your stuff to make it better on equipment thats easy enough to modify.
I recently got DT 770 Pro 250ohm version. And the wire for the right earcup was angled weirdly which was driving me crazy (OCD probably!). I wanted the wires to be beautifully symmetrical on both sides of the headphones!.
At 18:29 you removed one earcup, rotated it once and screwed it back in order to get the wire to follow the same curve as the other side. This was what I was looking for. It took me less than 2 minutes to do the same thing and now my headphones look perfectly symmetrical too!
Thank you so much for showing it (even though it's a minor detail and 99% of people won't even bother), this video was highly useful to me!
Your channel is a godsend for all Beyerdynamic headphone owners. I don't know why Beyerdynamic doesn't bother putting a detachable cable themselves. It's such a low hanging fruit. So many potential DT 770 pro buyers go with ATH M50x just because of the detachable cable!
Thanks - Glad it was helpful - it has to be said, it did not expect that part of the video to even be noticed ;)
Great Video! My cat decided to eat my 990s this morning so have been looking at an alternative to buying a new set (as I don't want the same to happen again 😂) this seems like a worth while option!
It is mad the number of these that get chewed on by cats. I am starting to think they must be filling them with catnip in the factory so they can sell more cables ;)
My German Shepard chewed up the cable moments ago. I landed on this video because I need to replace it.
give your cat a kiss :'O_Q :-) , thats why i want to buy the one detachable cable, i had to pay $$to get the 900 pro x
@@JayJay-ki4mi 😁😁😁, german sheppard prefers german made head phone as a snack
I ordered these, then immediately googled "DT990 cable mod"
Thank you so much!
I opened the box and went to work.
Outstanding headphones.
Outstanding mods.
Thank you so much 🙏🏻
Glad you like them
This is the best video about modding, I've ever seen. I bought those cans yesterday and was looking for a replaceable cable mod. This literally made my day..
Glad you found it helpful ;)
Just ordered a pair from you guys yesterday! First pair of legitimate headphones, super excited to get these. Also bought myself a magnius and modious schitt stack to go along with these.
Well... I hope you enjoy them ;) We have a queue of around 2 weeks for headphones to be made at the moment but they should be worth the wait
@@CustomCans thank you so very much for replying and im super excited ill probably have to wait a little longer because I'm in the states love the videos keep up the great work!
You guys sell these mods completed? I just ordered a pair of 990’s and I don’t know if I have the touch and patience to mod them myself.
Great job, I just bought a DT770 and I previously had AKG K712 a lot of wires.
Thank you so much
Subscribed, liked and leaving a comment to support. Thanks for sharing these things, they really help with making mods if you're handy but a bit cautious with your pricey things :).
Thanks ;)
Ok all my stuff finally came. Did this full mod and works great. Even braided my own cable. Thanks for your videos. Very informative!!!! Your awesome!!!!
Good Job ;)
@@CustomCans you were right about tinning the wire. It was tricky till I turned up the heat to about 450 lol
@@stickyfpv5231 Is there a video on how to braid the cable? Also, what gauge did you use for the outside wire connected to the slim XLR connector?
I have a pair of these cans, and I love their sound, even with their high treble, but I don't like the fact that the cable is not detachable.
I'll certainly to do this mod on my own, since I have some experience with a soldering iron.
Yeah the non detachable cable is a bummer and I don’t feel like coughing up the money for DT1990s lol.
But also not confident enough to perform this mod on headphones that have become my darlings lol.
Will probably get some used DT 770s or DT 990s to practice before I think about modding my lovely headphones haha
actually i like how DT770, 880 and 990 look much better then other modern style headphones even then DT1770 and 1990
Guess it’s more of that old professional gear look which doesn’t hide anything compared to cheap glossy plastic
It´s timeless without any bling bling.
I orderd the dt990 edition 32 ohm this is gonna be my first time, open back headphones since i loved the dt770 so mutch i decided to buy a second pair
They are quite different but I like both
@@CustomCans i noticed the diffrence between them def lesser bass
But more details
And less clamping force
Im afraid i like them both 🤣
Starting to get a little collection
Nice video, I did this to my cans with a slight modification I used balanced jack, since mine are 250 ohms and I want to use them with a powered portable amp.
If you use Canon ITT Mini XLR: M-XL-3-14, and bevel around the mating surface where the jack screws into the cup you can get a flush mounted jack, instead of the slight protrusion like I see when people use the Rean mini-xlr jacks.
It’s only about .5 mm of extra material removed and if supported with hot glue it will be solid.
Nice job 👍🏼
Love to see these type of vids
Still use my dt770 32ohms love them so mutch
Glad you enjoyed it
_This is how we do it!!_ Thanks for getting that awful song stuck in my head 😅
Lol ;)
Welcome to the master of headphones improvement)))! Could you tell me about the changes in the sound settings of the DT 990. What will happen to the frequency graph of this model if you do not insert this foam damper and leave them completely open. And also by putting leather corner ear pads like AUDEZE?
If you leave them completely open they get a wider sound stage but you lose a bit of bass. Adding leather pads may bring it back though but I have not tried that yet
@@CustomCans Thanks bro! There is another question about the design of the 990-model. The plastic insert that is inside, is it inserted back normally? Or there will be no way back)))) and you will have to live with a wide sound stage always)))).
Any chance we can see test results after you added the foam as i would like to see how much of that peak has been tamed
Nice and tidy job! I've done a fair few of these myself now dremeling the hole and hot gluing them after, but that tap and die looks like a handy tool to have. What particular size would I be looking for? Or should I just buy a set. Using the same Rean RT3MP as you are here.
It is a crazy imperial size - 7/16 32 is what to look for
This was excellent and a new subscriber
Welcome aboard!
@@CustomCans thanks 😊
I really wanna try an aesthetic mod (paint). White and orange dt990s would go insanely hard
If you have a scroll through our instagram you should see a few custom painted beyerdynamics
instagram.com/customcans_headphones/
Impressive work!
nice, thanks
Thank you Freddy Krueger !
Just watched your video. Gonna order a pair in the same light grey colour. Will sub too.
Thanks ;)
Gonna order this kit here instead and try to make this mod. Thank you
Nice work!
Thanks!
I like those headphones, but that is why having that fixed cable is that I have not bought them
You are legend 🔥
Thanks ;)
Neat job!
Thanks ;)
what kind of cable do you use in the braided cable?I would like to convert my DT990 PRO myself, but I can't find a cable like the one you use in the video. By the way, a very successful guide!!
We make those cables here from scratch. You are probably best building your own cable but we do sell them - I think balanced ones start from around £79
love your work but idk why would u make it heavier does it make it sound better or is it just a preference thing ?
The weight is added to the driver enclosure . Essentially it gives a bit more mass for the diaphragm to push against. Every action has an equal and opposite reaction, so as the diaphragm is moved in an out, the enclosure tries to move and flex the baffle. Adding more weight in the right places means that the enclosure is harder to move so more of the energy goes into making sound, especially in the sub bass region where the diaphragm has to move a lot.
So... the mass loading helps the driver recreate the very low frequencies more accurately with less harmonic distortion.
Interesting stuff dude good work
Thanks Haze
In the 770 you didn't use an XLR connector, is there a reason for that? I would prefer the xlr connecot,r thanks
Yes, we normally use 4 pin mini XLRs so they have the option of going balanced in the future
Nice work. So this foam mod also makes them more open backed in the process? I assume they leak a lot more than stock and you can hear more ambient noise?
You can leave out the foam to make them fully open but the foam helps reduce the peak in the treble. As they are pretty open any way and they have velour pads you don't get much isolation to begin with and I don't think this mod reduces it any further
@@CustomCans OK, thanks. Was just thinking this mod might make them more leaky out the back of the cans. I'm happy with a bit of ambient noise coming in, but the audio going out is more of an issue. Any difference in this aspect pre and post mod?
Awesome
I actually prefer the looks of these screams quality are you the person who sells these for an amazing price nodded I'm totally getting some some time soon but my awesome tube amp is super quiet on right side do you know how to a just the bias on the littlebear
Yes - we sell them pre-modded
jfunk.org/wpc/product-category/home/headphones/beyerdynamic-2/
So basically, the DT770 and DT990 use the same drivers, but they are configured differently internally. DT770 has sort of a ring around the driver that bridges to the back and closes it off similarly to any other closed headphone... MDR7506, ATH-M40X, etc. The DT990 doesn't have that tube piece inside, but has the vents, which are dampened a bit to tune the sound.... so what happens if I 3D print a new cup, that has vents on the back, stick some DT880 dampening foam in the back of that, and install it on a DT770 without the internal tube piece?... I would essentially have an intermediate between the 990 and 770 headphones. Maybe I can get the cleaner bass of the 990s and the cleaner treble of the 770s into one headphone.
It would probably not be that easy - there are so many things that effect the sound... it would be possible but would probably take a lot of testing and tuning to get them to sound the way you want
@@CustomCans Well in a sense I've already achieved maintaining good treble on the DT770s while letting off some of the excess base for a far more balanced frequency response simply with a pad swap to some aftermarket velours.
Couldn't you just use the wires that already go to the cable to connect to the XLR jack? This way you don't have to rewired everything?
Yes, we do it like that for people that don't want them re-wired . Here is a video showing that kind of thing
th-cam.com/video/woSGEGkn_XI/w-d-xo.html
That foam looks a lot more robust. Mine tend to rattle when I get a certain amount of bass in them. Would this foam help with that at all? I thought it was a problem with my specific pair, ordered a new pair and had the same issue.
it may... but it could be a hair in the driver or the driver may not be clipped in properly
There so good
Wonderful mod, just wondering what the point of the extra weight?
As the diaphragm moves in and out, some of the energy goes into flexing the baffle. Adding weight makes it harder to move the baffle and you end up with slightly cleaner bass
@@CustomCans that’s really clever. thanks for the response
what size hand tap is used to thread the hole? 7/16"-32 tpi ?
I just bought AG4MCC socket 4 pin connector from Amphenol, the datasheet precise 7/16"-32 but not the type of the thread ...I presume its UN or UNF types ?! this size is not so common to find it...
Thanks.
Do you sell DIY kits for the 990 pro? Can you recommend where to source some proper density foam?
We don't at the moment but I will try to get one listed next week for you and add a link in the description
@@CustomCans Excellent, expecting this DIY kit.
for what reason you added the extra weight to the drivers? what efect has that mod?
It stops the back of the driver moving as much so more of the energy goes into moving the diaphragm. It gives more detailed bass and a little more bass extension
I have the cans plastic casing broken(the place you’ve bored through with Dremel) What glue would you recommend to fix it?
We normally use a 2 part epoxy
@@CustomCans Thanks for reply. Actually figured out that casing is of abs, and it’s perfectly suitable to be glued with dichloroethane which melting abs. Also made some powder from abs to add little thickness over broken area. So far so good. Thanks for your vid!
Hi, if i want to make my dt990 balanced with 4.4mm male at the end, which type of connectors should i use, is there some cables compatible with rean rt4mp, or it is better to make anything else?
Any 4 cor wire that fits the connectors you have will be fine
Do we need special soldering iron or would normal ones work? Does it affect the sound ultimately?
A normal soldering iron should do the trick but practice on other things first - I have seen some nasty solder jobs people have done on these as they had not got the hang of soldering before trying to mod them.
The effect on the sound will all depend on what mods you do - if you just make the cable detachable then not a lot will change
Im in the procces of transforming my dt770's into 990's and im wondering: what is the diameter of the hole in the foam piece? and do you have the specs of the foam or link to where I could buy the foam? Thanks heaps.
We ended up making the centre hole the same diameter as the central part of the driver. The foam is 1/2" dense upholstery foam
@@CustomCans awsome! that really helps :)
Is there such thing as some sort of custom plastic cover that can be made to turn these into closed-backs for those times when you need closed-backs and then remove the cover for when you need open-backs again?
It is something you could make but it would alter the sound quite a lot
@@CustomCans I might try it with a 3D printer just to see (hear) what happens. Do the DT 770s have different drivers?
@@TheDigitalMedia The dt770, 880, and 990 have the same drivers. Im currently in the process of converting my broken 770's into working 990's with my 3d printer and hopefully they should sound like 990's. Good luck!
@@protron3545 please let me know how that turns out.
Ok, I got a question for you. I just got the mass loading and dampening kit in the mail today and did it, but now my left audio isn't working. Was working fine prior to that and the solder joints still look solid. Right channel works perfectly fine though. Any idea where I went wrong?
I removed the lead weights just to be sure it wasn't an issue of something getting shorted out, and it still wasn't working.
I also got the detachable cable conversion but I don't have the time to get my soldering iron set up until the weekend, so I'll be able to test that then, but until then I'm at a loss on what happened.
It is very tricky to tell without testing everything with a multimeter.
Hopefully you have broken a wire or maybe a strand of wire has come loose and causing a short. Worst case scenario, you have broken a voice coil wire, that can be pretty fatal.
Are they the newer ones with the wires soldered to a little PCB or the older style with wires soldered to metal stakes?
@@CustomCans newer style with the PCB.
I'm not 100% sure, but I think what happened was actually an issue with the iPod I was using to test the audio. Headphone jack broke free of its mount and I had to hot glue it to keep it in place (though I thought I tried them with something else to the same effect) but they're working again now!
Sorry for the late reply, I never saw a notification from YT that I got a reply
Would re-soldering new cables affect the quality of the sound in any way?
Not if you do it correctly
what about if you don't want to change the sound signiture
You can make the cable detachable without changing the sound signature noticeably
@@CustomCans this “
Original 3.5mm cable that came with the headphones *” convert to detachable xlr
And “Connector fitted to the headphones *” 4 pin mini xlr. I’m not quite sure the difference first question seems pointless when it’s asked again (or am I missing something)
nice job 👍 maybe you can upload some measurements.
Yes - I will get some nice waterfall charts made and stick some links in the description tomorrow
@@CustomCans nice! One more question: do you sell modding kits for the DT880?
@@FuturePerfectContinuous no not at the moment - beyerdynamic do seem to have put more love into the 880 and there is not that much improvement to be had
famn, do you di this as a side job?! take my phones and doooo something, please!
I work 14hrs a day 7 days a week - no time for a side job ;) but here is a link to where we sell the service
jfunk.org/wpc/product/beyerdynamic-detachable-cable-mod/
@@CustomCans oh, thanks anyways man!
Do you sale the components to mod these? Or do you mod them for a fee?
There is a link in the description to the mass loading and damping kit and a and the model number of the socket we were using - We do normally offer a send in service but we are booked up until the middle of July with work so not taking any more in at the moment
Random question from a new headphone user, the 250 ohms probably won't run on my phone/pc but I don't want to spend extra money on an amp/dac right now. Is it possible/worth it to do this mod for an 80 or even 30 ohm version or would it be a waste of money?
You could run the 250 ohm off a PC or phone temporarily if you are going to get an amp in the future - They won't go super loud and you will lack a bit of control in the bass but I use 250 ohm headphones straight out of phones and laptops all the time.
This kit will work on the 80 ohm but recommended for the 32ohm ones
BRO!! do you have a Store or a Service Site, to do these Jobs, Looking to do a Custom Setup for my Custom Game :D
I could have just clicked the Read More LOL i'll look into this Thank you for this video
@@R3dRuM839 Yes. we have a small team making custom headphones in a little workshop in Cheltenham UK and send stuff all over the world...
@@CustomCans love your work. Have you done anything with the Custom Game? I would love to find some Mods even backplates, upgraded wire harness, maybe some color, another option for backplate material 🤔 that isn't cardboard. Maybe a more open option for outdoor use. I did buy 990 Ear cups the velour those have helped outdoor use.
Enjoy the content!
Thanks ;)
I see you do these as a custom order. But do you accept orders from overseas?
Yes - 60% of our customers are outside the UK
Does the xlr mod make them feel any heavier on the left side?
You already have the cable dangling off the left side so you probably would not notice another few grams. If you are concerned try taping a few coins to the side to see how the added weight affects you. If you find your self leaning left or walking in circles I would not add a socket
@@CustomCans cool thanks for the reply and awesome video
Could you tell me where I can find such a nice mini xlr cable?
This link for a Three pin version
customcans.co.uk/shop/product/3pinxlr-cable/
And this link for a 4 pin
customcans.co.uk/shop/product-category/home/cables/beyerdynamic-cables/dt177x-cables/
@@CustomCans Thanks, I didn't know you make them yourselves, thats cool! Do you guys ship to Germany?
@@mg-sk3mr Yes, we ship world wide
What kind of wire are you using with the paracord? Would any wire work, or does some work better than others? Do different wire gauges and whether or not it's unshielded effect the finished mod?
The wire is up to you, You can re use the original wire - going thicker will reduce the impedance
OCC wire makes a difference..........
Is there a hearable difference between beyer dynamics and your cables?
That is a tricky question to answer. A lot of people are convinced there can be no difference in sound between cables. I think I, personally, can hear a difference and if you check our feedback, a lot of customers are really impressed with the sound quality improvement but that may all be Placebo. I can say for certain that they will have a lower capacitance, inductance and impedance than the stock cables as well as being more flexible and less microphonic.
looks really good. if i send my 880's over to you, could you mod them? I'm living in amsterdam
Yes we take in most beyerdynamics for modification
jfunk.org/wpc/product/beyerdynamic-detachable-cable-mod/
@@CustomCans I've seen that. bought it! I've also sent you an email with some more questions! Waiting for your reply, you busy man! Haha
What’s the reason for add those lead stripes? Justo to add some mass at the headphone it self?
Adding weight to the back of the driver. As the diaphragm moves in and out, some of the energy goes into moving the the rest of the driver assembly in the opposite direction. Adding weight makes it harder to move so more of that energy goes into making sound rather then wabbling other areas of the headphones. Generally it seems to improve the clarity and extension of the bass
foarm kit work's with DT990 edition pro 250mohm ?
No - our 880 kit will fit those
Is this 32, 80, or 250 ohm?
250 ohm
How much for you to do this on a DT 770 Pro? I love how my 770's sound, I just want to be able to have a choice between cables. Like when I am using the computer I can just detach the cable, and put a longer one etc.
It starts from £46 I believe jfunk.org/wpc/product/beyerdynamic-detachable-cable-mod/
Could you please tell me density and all features of the foam you used?
Thanks
We experimented with quite a few but high density upholstery foam seemed to be best - I think the stuff we are using is 12.5mm thick and similar dimensions to the original insert
Did these go out to someone in the end?
Yes, They would have done after a bit of testing
@@CustomCans no problem thanks a lot!
Hello do you do this mod if I send you the dt 990 pro ?
Yes, here is a link to the service
jfunk.org/wpc/product/beyerdynamic-detachable-cable-mod/
What litz wire are you using to make your cables?? I want to give it a go and build a cable
The litz we use is specially made for us to our own spec. But any litz up to around 1mm outer diameter should give the same sort of effect. That said.... Litz is not easy to solder properly so if you have not used it before, it may be better just to use normal wire. The difference in sound will be quite subtle
@@CustomCans thanks for the reply. I’m actually great at soldering. I build drones all the time and solder some real tiny stuff
3:41 Montell Jordan, is that you?
Ez Icarus - Slick Ghetto Story
Have you ever given it a go on the DT 770 pro, 80 ohm? Like making it into a semi open back, detachable cable, etc? The reason I am asking it that I purchased this set a few months back but now some home studios are saying to use the DT 880 pro 250 ohm instead. I have a hard time determining if spending another 240 dollars Can, on yet another pair is worth the hassle and expense?
If you are happy with the sound from the DT770 then I would stick with them. We do make some mods to squeeze a bit more out of them but going semi open would be a big job and probably not worth it
jfunk.org/wpc/product/beyerdynamic-dt770-mass-loading-and-damping-kit-v2-mod-kit-by-custom-cans/
Hi, I got a DT990 recently and I'd like to know if it's possible to mod it with a 6.35 jack? Is there enough room I don't know how much these kind of socket need and I don't really want to ruin a pair of working headphones lol
Also, I don't know much about audio so I don't know if it need specific cables, I noticed some had not only copper inside, regular wires wouldn't do the job ?
I like your style... Go big or Go home ;) - but... no it would not be easy to do as those sockets are quite deep and will probably hit the driver
I have the 990 pros but I hate how long the cable is. I just want a detachable one but I don't know what to choose. Should I choose a 4 pin mini xlr in the headphone plug and have a 6.5mm cable to plug into my audio interface. Or just have a 3.5mm conversion?
If you have or are likely to get a balanced headphone amp then go with the 4 pin, if not then I would go with a 3.5mm conversion as there are more cables available and you can also plug in boom mics and stuff
If I run an EQ specifically for these cans, I should omit the damping material and weights, right?
It is totally up to you. If you have EQed them and are 100% happy with the sound then leave them as they are.
Could you tell me what is the name of those lead bars that you glue to the driver to give it more weight?
It is 6mm self adhesive lead
Hello, thank you for sharing your crafting skills. I have a question. It is somehow possible to add volume control on the cable for these headphones?
Yes - probably the easies way other than using a little portable amp would be to swap the cable for the one that comes with the DT770M - you can buy it from beyer and it has an in line volume control
VIVON
How would you recommend doing the detachable cable mod while keeping the stock dampening?
You can do it the same way with the original disk of damping material in there or like we did on the video below
th-cam.com/video/S_kzAuMhsWk/w-d-xo.html
4:25 what if I remove the damping material And just leave it like that. Will it increase soundstage and overall sound?
We used to do that - it makes them sound more open but also makes them a bit brighter and reduces the bass. Adding weight to the driver brings the bass back in line so you need to do both. The foam insert reduces the peak in the treble.
Specifically what gauge and type of wire are you using to make your custom cables and use in the cans?
it is litz made of 84 x 0.071mm wires per core each wire is individually insulated and the core is wrapped in natural silk fibbers to hold it all together. The outer cover is 550 paracord. So... nothing too exotic, a lot of the magic comes from the geometry rather than fancy materials
@@CustomCans thanks for all the info. Right now closets litz I can find is 80/41. Pretty close
@@stickyfpv5231 Yes that should be pretty similar. If you have not dealt with litz before, I would recommend having a good practice soldering it before you try to attach it to the drivers - it can be much harder to solder but there are lots of guides online. Just remember that as all the strands are insulated from each other , you need to make sure all of them have solder on the end or the ones that don't get solder on won't carry any signal
@@CustomCans thanks for the tip. I’ll make sure to tin the wire really good. Too bad I had to order the litz from China so it will be a month before I get to try lol
@@CustomCans also I want to ask what part are you using as the 3.5/6.35 straight threaded jack? I can’t seem to find a quality one
I wish I could do this or know some that can
I just followed your video and I was wondering if there was something I could have done that makes the sound a little muddier? Just seems like less definition on the low end. I am sure it will just take some getting used to, but I wanted to check. Thanks for the video and selling the kits!
It is a bit tricky to tell without having a look. If you have the older kit with the lead weights then I would check to make sure you have not blocked any of the holes on the back of the driver, If that is not it, you could email us some pictures of the install and we may be able to see something
J
nice! can you use a balanced cable with this wiring?
No - you need to fit a 4 pin mini instead if you want to go balanced
is there a list for things i need to use on this mod
I have now added a list in the description
@@CustomCans thanks
How do I send you my stuff so u can do this
Here is a link
jfunk.org/wpc/product/beyerdynamic-detachable-cable-mod/
Hi.
Does the damping also fix the "Beyerpeak"?
I also have an amp with balanced 2x xlr (1 left, 1 right) and I'm unable to find any adapters for my specific case (mini xlr to 2x xlr). Do you have any links for me?
Yes - our latest version with the foam insert does smooth it a bit. Here is a link to a cable that you could use with this mod
jfunk.org/wpc/product/ultra-low-capacitance-balanced-litz-cable-with-single-4-pin-mini-xlr-for-dt177x-hdj-x10-and-modified-balanced-beyerdynamics/
And here is a link to pre-modded headphone with a 2 x 3 pin XLR option
jfunk.org/wpc/product/modified-dt990-for-pono-player/
@@CustomCans As said, I need short adapter cables because of the price. My budget doesnt have place for 190€ for just cables.
Because of that, I would like to do the whole mod myself but I am unable to find proper litz.Is there a way to get litz and paracord for the whole mod from you?
Do you have a parts list? Also do do this mod in house for customers?
I have now added a list in the description
hello im interested buying a pair with the same mods that u just did but im all the way from california do u guys sell this kind of pair and do worldwide shipping?
Yes we ship wold wide
jfunk.org/wpc/product-category/home/headphones/beyerdynamic-2/dt990/
Where can I get that damping material. What is it
There is a link in the description to a kit with all the pieces cut to size along with the weights and foam insert or if you search for bitumen sound deadening you should find blank sheets of it
how much do you sell me one like that?
jfunk.org/wpc/product/custom-cans-uber-dt990-headphones-with-modified-drivers-and-detachable-litz-cable-3-5mm-6-35mm-trs-jack-copy/
For the part at 16:29, would some pineapple slices work?
I think if they were dried pineapple slices it may work
you and I can be friends sir!
Do you have a link to these custom cables you're using?
jfunk.org/wpc/product/ultra-low-capacitance-balanced-litz-cable-with-single-4-pin-mini-xlr-for-dt177x-hdj-x10-and-modified-balanced-beyerdynamics/
Or we have a load in our clearance section
jfunk.org/wpc/product-category/home/cables/beyerdynamic-cables/beyerdynamic-clearance-beyerdynamic-cables/
@@CustomCans WICKED! Do you have a guide for putting one of these together? I have a bunch of ideas now :D :D these are awesome!
Or should I go stranded?
1:01
What size tap are you using for those Rean connectors?
Are we able to buy that foam on your site?
I should have a listing for it up tomorrow. I will add a link to the description when it it on there