I would change that plastic oil pump sprocket at least every 20,000 miles or during an 8,000 clutch job, seen some of them lose some teeth and prevent oil from reaching the top,,,,,the peaces disintergrate and the sprocket skips.
You can put a Pennie in between the gears and it should allow you to get enough torque to get it off. I banged on it with a hammer and ratchet and it eventually came loose.
@@irishryder2470 thanks. I tried a microfiber towel but the gears just cut through the towel. It is really tight. Are you sure the tooth will not break?
@@johngodwin7902 this is a trick I've seen in many other TH-cam videos. The copper is soft material and will not harm your gears. Hang on I'll try and find a video so you'll see what I mean.
I seem to be screaming in the beginning. Sorry must of lost my voice. It's a video more for visual anyway! Thanks for watching and not subscribing! LOL
![30 ชั่วโมงคนเดียว บนรถไฟชั้น 3 โซเวียต [Around The World Ep. 2]](http://i.ytimg.com/vi/MlE9boAVqDA/mqdefault.jpg)
I would change that plastic oil pump sprocket at least every 20,000 miles or during an 8,000 clutch job, seen some of them lose some teeth and prevent oil from reaching the top,,,,,the peaces disintergrate and the sprocket skips.
Thank you for the info! I'll look into a replacement.
Where do i get one? Post a link please
@@tonysketch th-cam.com/users/shortsoo-7Whvzafs?feature=share
2:40 min. You use the special tool. I have that tool. How do I break it free? Mine is so tight the engine keeps turning over.
You can put a Pennie in between the gears and it should allow you to get enough torque to get it off. I banged on it with a hammer and ratchet and it eventually came loose.
@@irishryder2470 thanks. I tried a microfiber towel but the gears just cut through the towel. It is really tight. Are you sure the tooth will not break?
@@johngodwin7902 this is a trick I've seen in many other TH-cam videos. The copper is soft material and will not harm your gears. Hang on I'll try and find a video so you'll see what I mean.
@@johngodwin7902 th-cam.com/video/HiMATle8dpQ/w-d-xo.html here you go just what your looking for!
where did you get the socket and gasket from? thanks in advance
All the parts used are in the description buddy.
I don't see em😢
damn LOWTALKER !!!!!!!!!!!!
I seem to be screaming in the beginning. Sorry must of lost my voice. It's a video more for visual anyway! Thanks for watching and not subscribing! LOL
What size is that socket used to get the starter off please?
I believe i put it in the description. If not this one the other clutch video.