Beautiful design and good build quality ... It has beep in diode range with green indicator, fast active continuity response and high resolution ... It is so far the best one of UNI-T multimeters.. I was searching for a multimeter that can measure 50 MHz and up for motherboard repairing but UT61E+ has the ability to measure 220 MHz frequency...OMG!!! It kills all...
Wow! Great review, thanks Darren! Love it.....and i have been eyeing it now for nearly a year but can't quite justify buying it since i have maybe a dozen multimeters already....but man, it is so tempting!
Big thx! Yes, it really is a great multimeter, UNI-T definitely did a bang up job on the UT61E+...If I was going to buy only 1 new multimeter for 2021, this would be it!
@@KeepOnTestingHey mate, I know this review is a few years old. But would you still go for this in 2024 as a all round hobbiest/ electronics multimeter? Chasing good accuracy and in similar price range or less. Thankyou :)
Oh yeaaahh Thanks Darren for always keeping us abreast in the Uni T line up. I have bought 2 uni Ts in the past 10 months (UT191T and UT195) because of your comprehensive reviews, I do nothing fancy just Automotive applications and I'm loving it's shock proof body. Thanks again and Cheers ❤️love lots from the Philippines
great review ... i always wanted a great multimeter years back and uni-t ut61e 22k multimeter with a bar graph was the best for the money. That was the dream then but when I actually bought one it was a different time.. I could afford a better one. After watching your review, refreshed old memories.. may be just for the nostalgia I will buy one!
Well finally Unit has come through with some big and much anticipated upgrades and features on this completely new edition of the UT61E-! Not only a backlight which the old version did not have but one that stays on at the users command and sporting colorized alert with diode beep, wow. And hiow about that shielding, very nicely fit not just an after thought. Obviously some new software will need to be issued for the data link, but its just a software update away. Even more surprises in the audio and visual alert areas and more. The great thing is UniT appears to have been listening to its customer base and comments and responding in this new revision. Thanks for listening UniT, now just dot the I's and cross the T's to back up the price point and this one should be a winner and welcome major upgrade to its predecessor
Incredible isn't it...I was floored when I realized the backlight was permanent...talk about a great update..! Hopefully the data link will be rectified soon..its a big deal for sone folks. Btw, the design is really growing on me..absolutely looks great on the bench. What do you think about the new look ?
Well, it's definitely an improvement for the UT61E. The screen is large and sharp. The indefinite backlight alone deserves a star. The color coded input.. Nice AAA batteries.. Audible diode testing.. I like it. It's a shame that they rushed the release, though. UNI-T had had to work hard to get a reputation of a reliable manufacturer. I'm not sure it was a wise move to make the consumers wait for them to sort all the software problems. I see it got a place in the top ten cheapos. I wouldn't call an $80+ multimeter a cheapo, but it's a good multimeter nonetheless. And I would have to agree with Marcos Cano. The visual effects can make videos look more flashy. But at 18:32 they are too distracting. As for the Christmas draw, I already got a multimeter from Santa. No other presents needed. Still hope to catch the Christmas livestream this year.
Well said ! Appreciate the feedback as always..I'll definitely take your suggestions to heart. Yes..the TOP-TEN CHEAP-O Multimeter list will be adjusted accordingly...its definitely not a CHEAP-O. Keep on Testing!
Thanks for the early review on the new Uni-T 61E+. I was hoping this would be an easy decision to upgrade to from my current 61E. I am always forgetting to turn off the 61E and draining the 9V battery. This new 61E+ meter certainly fixes that issue along with backlighting. I don't need the hFE or the NCV features and echo the wishes for a temperature measurement instead. The price seems a little high to just run out and buy another but hopefully that will come down over time. Maybe they can come out with another upgrade (61E++) that will be more for electronics.
Hi Brian, I echo your sentiments. I don't know why they labeled the UT61E + as an Electricians multimeter ? It has no NCV and no weatherproofing/IP Rating...also no independent UL/Intertek Cert means it might not be sanctioned for professional use in North America. That being said, it's one great 👍 multimeter for the masses and the data logging feature (yes switched USB cables now works) is very fast and stable. Honestly though, if the improvements don't sway you then you're probably better off passing this one by, after all..its still a UT61E+ just leaner and meaner 😃👍
looks like 2 IR diode for USB communication, RX & TX probably like other high end DMM? Those diode beep test is similar to fluke 87V, and I surely appreciate that additional green led indicator, fluke should take a note. Hold button as backlight? I might miss my delay hold on UT61E, at least they should try autohold or similar to fluke's touchhold. Funny though they use those ARM processor and keep at 22000 counts; for the sake of UT61E name series probably? Clamping transistors looks nice and easy to identify (and get replaced with better TVS ). Resistor network similar to UT61E, some people try to replace it with very expensive Caddock but then realize it's 22000 count with 0.01mV resolution, not much of difference. No calibration trimpot? can be a good thing, supposedly more stable than those dreaded multiturn trimpot that keep drifted away, bad thing is you probably can't calibrate it yourself. Things I'd love is 0.001 mV resolution DC (and AC if possible), slightly faster capacitance measurement. They limit their max voltage measurements to 1000V, my mastech MY-64 survived many 1999-ish DCV with no breakdown and still going strong (it was 2000 count limited, hence 1999VDC max.). I use that voltage mostly to test MOVs & TVS.
Correct, the Cyrustek chipset is 32,000 count so its definitely held back from its full potential. UNI-T did alot of things right with this dmm. No calibration trimpot makes sense and should help with stability over the long term. The MY64 series is definitely a work horse!! Great info.. thx for your input 👍
How is possible this meter has capable to measure 20A current and is protected with 10A fuse? what's the part I not understood? I enjoy much viewing all your reviews.
Excellent video and congratulations on the channel, I just ordered one of these, it looks like a great multimeter for electronics and home electricity, rich in functions and with incredible ranges. I hope NCV performs better on mine but it is not a feature that I will use very often anyway. Greetings from Uruguay
Is it the upgrade of UT61E?? By the way it is a cool multimeter, very well finishing. But NFC is very poor & there should be temperature range instead hFE
Agree. hFE is very archaic (especially when there are transistors meters for few bucks), instead there should have been a temperature measurement function.
I watch your video reviews and am your subscriber.As always interesting, informative and a little humorous, I have another like.Thank you for your work, know that you are watched not only in America and Canada, but also far beyond the ocean!
Thank you my friend! It's very nice knowing that I have viewers across the ocean such as yourself. TH-cam has made the world a much smaller place and that's a good thing 👌 Keep On Testing! 😃👍
Sweet definitely sums up this update. I think my USB Cable is defective hopefully a new one will fix the data link issue. Definitely pleasant on the eyes..akin to that red Vondior Weather radio you reviewed not long ago on your channel..😃👍
Good Job :) DMM minus : 1) smal fuse 2) very low voltage for the diode 3) NCV low sensitivity 4) no AutoHold function plus: 1) hFe 2) good leads 3) backlight constans 4) new design 5) AA battery 6) good acces fuse Summary: in My opinion - old version is better
Doesn't look bad at all... The speed of autoranging is good. I have several multimeters based on DTM0660 or some similar chip (UT139C, AN8008...) and while generally working fine, they are super slow in this aspect. But it costs considerably more than the classic 61E. Maybe at that price or slightly more, there is some Brymen meter with similar specifications...
dang, that's truly near to perfection! a non auto-off backlight, easy access fuse, fast continuity, and very accurate, awesome! if only Uni-T raise the diode test voltage a bit to 3.2v or so, and make the USB function easy.. i don't mind about the weak NCV in this meter, but if they can make it strong for the cheapo ones, why not do the same for this meter? but nonetheless, it's still a solid meter. 👏👏👏😃
Absolutely 💯 in agreement...definitely a long overdue and worthy successor...I was sure the NCV was going to blow me away..but wow..its definitely in need of an overhaul..
@@KeepOnTesting yes indeed. now i wonder if the NCV antenna is MOD'able, maybe replace it with a copper coil or something to improve its sensitivity.. 🤔
good video,but if the meter for ELECTRICIAN the NCV function must add the SENSITIVE and have A choice for min and max be good .Thx dr.darren make A good video.👍👍👍
Thx Wilson, I agree, as it stands the NCV on the UT61E+ is really slow not very sensitive. hopefully UNI-T can improve that .Btw, I really wanted to demo the UNI-T Software with the new UT61E+, hopefully soon!
@@KeepOnTesting and Before i also have A software of UNIT but never use it and TEST ,cannot know how to use ,and good or bad,your video is very detail one for people take A look for buying A New meter.thx
Hi, I'm looking some extra features on this multi-meter, as an example if you press the hold button and turn it on is it how fast and how much count it will be(previous one, has a less count, but make supper fast measurement ) what about "ripple" AC on DC? why it go on overloading when nothing connect on it? TrueRMS bandwidth? Exclusion function through the range? Because everything that you show in your video we can make by 20$ multi-meter.
AIexey, it's a standard touch hold, no delay ...unextraordinary. I would use the MIN/MAX feature to hold a reading as it will freeze the reading indefinitely. Unfortunately this clip was negated in the editing . I'm not sure what "overloading" you are referring to. It stays on dead zero with nothing connected in Voltage mode, there could be sone EMF at play on the leads if near other electrical sources but its usually very good at zeroing. Yes, AC-coupled true rms measurement is desirable when measuring small AC signals in the presence of large DC offsets. However I could not review every feature in detail as I wanted the video under 30 min. Stay tubed, there will be more on this great multimeter in the future.
Hi, just found out today,, the screw hole at the back of the 60+ and 160 dmm is compatible with camera and phone tripods/phone stand, I mounted mine on it.
The latching on that continuity test, bang on! you could knock out a tune on it..or at least a bit of morse code! Fast! The 'stays on' back light? The stuff of testing awesomeness... Christmas is a coming..Will there be a Christmas edition on this channel? A 2020 round up? The best and worse of the year? I await the official word with bated breath!! (edit)... I pause the vid near the end to write my comment..then hit play to hear you mention the Christmas day give away...nice one! Your collection of Uni-T meters is astonishing BTW... 😍😁
Cheers my friend! I just about passed out when I heard the continuity..absolutely incredible! Probably the best continuity I've ever heard 👂 out of ANY multimeter I've ever used.. astonishing! A 2020 roundup might be on the table, I'm currently testing alot of gear so stay tubed ! As for my UNI-T collection..thx, it's definitely growing! 😄👍
@@KeepOnTesting I request you to please play Morse code when you find that a multimeter has good continuity, it was always my dream of watching it in your reviews 😁
Just love the new styling of UNI-T, wonder if there are plans for a new 181A? I have the original of this meter and has served very well. Best wishes from Northern Ireland.
@@KeepOnTesting hi, just got the 61d+, i like it very much,, it was able to light up all my test leds,, diode open ckt voltage is 3.2volts. Ncv mode is good its not as weak as shown in your video, maybe I was lucky with this one
@@KeepOnTesting indeed a great news,, even the pc link is working, I just got it tested now. Im using windows 10 version 20h2 latest version on a 64bit system ryzen 3 , 16gb ram machine.
Great review! I saw this meter on ali express about a month ago and was waiting for someone to make a video! I’m wondering if they used a 1A fuse to reduce the burden voltage on the meter. I’m curious what the voltage drop across the meter is at 200mA and whether or not the handful of ohms from a 220mA fuse would be significant. It seems like it’s an upgrade from a 61E, especially as far as input protection goes.
Хороший обзор. Я только мечтаю такой купить, но не могу, я инвалид с детства и у меня нет средств купить себе такой замечательный прибор, если бы случилось чуду и мне кто-нибудь подарил я был бы счастлив 🙏
I just got my 61e+, too. I noticed the casing has a little bit of play near the gap on the right side, when squeezed. Is it same on yours? On 3:11 it seems yours also has that bigger gap on right side.
Great stuff! I have zero play on my unit. The casing is even and square all around the perimeter. During the review its possible my unit was not fully secured after doing a Pre- Teardown. Any one else have a similar issue on their new UT61E+ ?
@@atexnik ahhh...thx for the video. Unfortunately I don't have that space on mine.. let's hope its not typical. Will you keep or return the multimeter?
@@KeepOnTesting since this is a minor issue, and considering the fact, that I've obtained it via a dropshipping company from China (hence, there's no way to return it), I'll keep it.
Hi Darren , I had just look into my 61d+ internals and to my disapointment it does not have the shielding, maybe only the 61e+ have it. Also the ptcs,, mine only have 3,, and the high voltage precision resistor network the black retangle precision resistor is not present, solder mask is green.
Thx for the update Juan..wow, that's truly disappointing 😔 I wonder why the shielding was absent on the 61d+? As for the input protection , I suspected it may have been watered down on the other versions..thanks for the confirmation.
It transmits data through those LEDs so they must be Infrared. But how that IR signal gets converted into electrical signals for passing on to USB port? 🤔 ..... You should have tested and showed us the Hfe mode in video. What logic UNI-T had thought in that fuses in there?
Good day Darren,, question. Have you observe this on your unity legion? There is an issue in low ohm measurement. In shorted test leads meter shows 1 ohm.The user manual stated if meter have higher that .5 ohm in shorted test leads is not normal. The meters are just appox 1 month from purchase date. Test leads are good. Tested it ony my 87v and sanwa cd771. This issue occurs on my 139c and 61d+ . 87v shos .3 ohms, sanwa shows 000. Unity both shows 1.1 ohms
Friend, help me with any questions please 1 - Do you think I can use the UT61E + for bench use for external use without any problem? I am a T.I technician and I use it for repairs to motherboards, fountains, desktop etc, and sporadically home electronics, 2 - do you think I made a good choice to sell my fluke 28 II EX to keep my money in my pocket and buy this Unit? 3 - Can I exchange the 10A fuse that comes with it for a 20A fuse? If yes, how many V would be fuse? I thank you for your help now and success in your videos congratulations for the content!
Most definitely the UT61E+ is a great bench meter! High resolution and logging capabilities its hard to beat! As for selling the Fluke 28 II ex, it's a classic 👌and well built. Honestly though, it's apples and oranges, two very different multimeters but fear not, the 61E+ should serve you well! You could replace with a 20A fuse but keep the 250V rating as that is the spec. 😉👍
Hello. I bought this multimeter a couple of days ago. A very good model for your money. The software works fine in Windows 10, but to download it, you need to solve a puzzle: there is one extra dash in the link to the program,before ._exe, delete it, and everything will load. What disappointed: weak NCV (not really needed) and there is no indication when the LEDs will ring ....
Hello, what a great test. Is the D+ more for the average hobby electrician ? I am having hard time choosing, not sure if i need the extra features on the E+
As I recall, you were going to breakout the bubbly with a cheao meter, but you could do it anyway and buy more for later. That meter has some pro ranges and good input protection; however, the higher cost and lack of UL, CE, SA, ETL or etc puts it in questionable position. I wonder about the data link. Good review--count me in the draw.
Cheers my friend!! I was at a crossroads.. its not a CHEAP-O but its definitely shielded...stay tubed for that bubbly.. 😳👍 I was miffed about the data link..absolutely a nogo...but I'm sure I can get it going..it just shouldn't be such a chore to setup.
@@juancarlossandoval5628 Yes that's correct. However, Conformité Européenneor or products that have received the CE Mark are not automatically considered to be UL Listed. This is, in part, because some product types with the CE Mark do not have to be third-party certified and are not necessarily compliant with North American standards.
Yeah, plus that good-looking design and gold tip probes... UNI-T is definitely stepping up. Last month I purchased a UT89XD (my first multimeter) for PHP1,000 (about 21 USD) only, here in the Philippines, thanks to your review. Hope I can get selected in the draw. A second multimeter would be great. Thanks Darren!
Great review my friend. I'm confused, which one i should buy in your opinion: UT61E+ , UT191T, UT195E ???? I don't want it for heavy use, i'm not an electrician.
If you're not going to take it outdoors I'd opt for the UNI-T UT61E+..you get alot of multimeter in an extremely well made package! Second place goes to the UT191T which is a favorite of mine.. it doesn't have the resolution of the 61E+ but it's a superbly built multimeter with IP65 weatherproofing!👍 Both are great choices..
Love that they use bigger movs and ptcs,,, downside is the diode test, my 139c was able to display forward voltage drop and lit all my test leds, this one seems not so as your test shows.
Excuse me Mr.Darren Walker. Can you please help me to choosing my first multimeter?? Either richmeter rm219(zt219) or habotest ht118a. Rm219 have 19999 count and habotest have 6000 count. I don't know if i really need that Rm219 more count. From what i noticed Habotest doesn't have relative button,range button. And again i don't really know if i really need those button. Will i get a hard time without those button sir???. I want to use it for repairing broken stuff such as measuring fan capacitor,checking not working pcb,checking smartphone component that not working properly,etc. What is your opinion Mr.Darren? Should i choose rm219 ($23) or ht118a ($26). Or maybe you have another recommended multimeter?? As you can tell, yes i am a newbie with no experience here. Please excuse any mistakes as English is my second language. Thank you.
HABOTEST HT118A is my choice from those 2 multimeters. Its proven to be a worthy contender again this year and is rated #1 in the CHEAP-O Multimeter Top Ten ! Lots of functionality and a great design 👍
191 is geared towards offsite, outside electrical work..It has great weatherproofing and a solid build. 61 is better suited to bench electronics. Both are stellar multimeters in their own right.
Great review, as always! I wonder what multimeter would you choose: UT61E+ for 76EUR, UT17B PRO for 59EUR, or UT191T PRO for 63EUR? Or some other DMM, even better, in the same ballpark? I need it for occasional household/automotive/bench work
WOW..no pressue eh 😄 If I had to choose just one and I didn't need to use it outside just strictly on the bench I would opt for the UT61E+, it just impresses me more everyday. For outdoor/electrician use I would choose the UT191T as I love the smaller form factor, IP Weather proofing and independent UL/Intertek certification.👍
Ouch. USB logging is what makes this DMM unique. I'd be livid if I bought it for that feature and couldn't get it to work. Other points: 250mA is too low on the low current side. Are those 4 AAA 4s or 2s2p? If 2s2p, they should have used 2 AA. Lastly, I think I missed the diode testing. Overall for $100, I'd expect UL listing, 600mA low current, and working USB.
The USB data logging was a real pain. Definitely should be working without all the hassle. I'll keep you posted. Btw, it's running on 4 AAA batteries. Standard diode testing was nicely implemented with an audible beep and visual indicator. Definitely missed the UL listing and agreed, that mA range is too low for a multimeter in this price range.
Why was my comment deleted ? I just mentioned that I owned two UNI T multimeters in close succession , and they both broke down , thereby presenting the question of reliability. It would be nice to hear from others with experience of the brand regarding both reliability and unreliability, so that potential purchasers can make a slightly more educated guess before buying. Why the censorship?
Hmm..nothing was deleted. I love the feedback. Good or bad its all relevant ! Reliability is important and so is price, build quality, performance, features and input protection. I think UNI-T has a real winner with the UT61E+
@@KeepOnTesting Thanks for the appreciation of my feedback. My Meters were both 61A’s . Maybe input protection has been enhanced on the 61E.model. I agree with you that as far as performance and capabilities go,, Uni T give incredible value for money. As far as reliability and durability go, I’m not sure . I may just have been unlucky with my two- it would be good to get some feedback from other owners. My personal experience with UNI T has just caused me to fork out on a Fluke.
This channel should definitely have more followers. Precise reviews. Good explanations. Did purchase a multimeter right after this channel reviewed it. Subscribed as well
Thanks Volker 😊 Slowly but surely we are increasing our subs. I really appreciate the feedback! Glad we could help you choose your multimeter. 👍 Keep On Testing!
wt-h 19:55 was convinced that some other window in the browser started.. completely out of synch to any relevance on the video and totally muffled your words. anyway, thx for a great walkthru of this meter... though these inserted edits and sounds. 19:00 and fx 20:00 and likewise ohh boy' does not do your video any favors, quite the contrary. and yep +1 for always-on backlight ability. Would have like to have seen 18650 cells, but thats sadly not the "case" here where we still rolling with triple-As.. though better than 9v but would prefer 18650 LiIon's like we are starting to see on other DMMs / multimetertools.
Indoor, for the Electronics bench or workshop..UT61E+, If I was an Electrician or tradesman using this daily, outside then the UT191T...Hope that helps! Both are great multimeters 😃👍
With regards to automotive use, the UNI-T UT107 which has Dwell, RPM and a 12V Battery test... is a great choice from UNI-T. You can find it here: ebay.us/gL4QaV
I suppose if I didn't already have 8 or 10 meters it might be a decent purchase. But they shouldn't call it "Electrician" with no UL listing, crappy NCV and the other drawbacks. But when has China ever worried about their product claims matching the product?
I really don't know how they turned it into an Electricians multimeter either.. as you mentioned those shortcomings don't add up..Absolutely a great multimeter though..and why not make it 11 😀👍
Its interesting but after the UT61C was such a disapointment its hard for me to decide. The UT61C I have reacts like an old RS lab standard that I got in the early 90s and I actually have a $15 meter that reacts faster.
Well Frank...I don't blame you for being cautious.. absolutely worth the money though..UNI-T has a winner on their hands...and if you're not happy..heck..I'll buy it from you 😀👍
@@KeepOnTesting Darren, If I didn’t have to ship it, I would sell it in a second. Mind you I still have a VTVM that I got around 1970 but it just might outperform the UT61C. I am a sucker for a new meter, but what were they thinking selling it with an RS232 PC cable. I’m not saying RS232 isn't used anymore but I've been working on PC’s since 1982 (ZX-81) and I cannot remember the last PC with an RS232.
Hi Darren, I would like to request if you can verify this, " there is no manual ranging in capacitance mode on 60+ series? I was testing the capabilities of my 61d+ there is no way I can manual range in capacitance test.
@@KeepOnTesting kinda sad,, I had found another shortcoming in capacitance test, it cannot detect short.. so when a cap is shorted it would just show OL not beep,, buzzer should sound like a buzzer sound in continuity mode once a short is present even in capacitance mode.
Just bought one for testing, but must say that UNI-T should put the hFE testing up in their ***... would have preferred thermocouple support instead. No doubt. The fuses seems to be a piece of gargabe, I even doubt they are real ceramic... Also, how can a CAT III 1000V/CAT IV 600V meter have 250V fuses? Videos on Bilibili (chinese TH-cam) shows that this meter has good precision, just as good as an 87V. Well, in the end it's a 70€ meter, so it's not bad after all. Time will tell if UNI-T fixed the bad drifting the old UT61E had and how well this thing supports ESD/Transients. BTW: Too many innecesary video and audio effects on your videos. But that is simply my opinion.
Hi Marcos, thanks for the input..your opinion matters and I'm always appreciative of feedback, good or bad. Yes the hFE is "interesting" and I too would have preferred Temperature in its place. Have you tried the data logging? Definitely better built than its predecessor but time will tell how good of an upgrade we've got, I think its mostly good.
@@KeepOnTesting Well, I haven't tested the datalogging yet, and I think i will not be able to for a few days to come. When I have some time I will test it in various operating systems using virtual machines and let you know.
@@KeepOnTesting *Do you by any chance know how the LPF mode differs from the VFC mode of UNI-T multimeters? It seems that there is only one function - it is used to measure frequency-controlled drives, but why the designation on different series of multimeters, ONE AND THE SAME UNI-T company, is DIFFERENT ??? It turns out that there are some differences. And if there are differences, who is better? In general, I did not find such information anywhere, I googled everything. I would be grateful if you know the answer :)*
@@KeepOnTesting I confirm you the PC connection is working in W10 x64. You have to install a software which UNI-T has not even bothered to upload to their website. Found it on EEVblog forum uploaded by user "spidola".
@@marcoscano7998 Roger that. I've had the software running on W10 for the past week, mine was a USB Cable issue, new cable resolved my problem. 💥BTW, I've had the latest UNI-T SOFTWARE and Software Manual link available in my video description above, since NOV 30. It's also been pinned at the TOP of the comments for over a week. He probably downloaded it from me 👍
Somehow strange: On one side it seems, Uni-T tries to build a pretty perfect DMM. On the other side it seems, they are hesitant to make the final step. And that can´t be explained solely with cost reasons. Examples: - The big beefy input protection gives somehow confidence. But no HRC-Fuse and no independent certification... Why not? - Four AAA batteries are delivering not enough voltage for measuring the voltage drop of all kinds of LED´s... Really? - Still no temperature measurement. Couldn´t be implemented in the RISC processor? Are you kidding, Uni-T??? - Personal regret: It seems, the (not documented) "delayed hold" function from the original UT61E has not survived. Why? That was a quite useful "easter egg"... Nonetheless: IMO is the new UT61E+ a pretty useful DMM: - Accurate (and fast) measurements - Higher than average resolution - Fast continuity test - Still fast reacting bargraph display - neat and nice LED indication (continuity and diod test) - Gold plated probe tips, therefor no contact problems - Versatile usable with wide and sufficient ranges - capable of doing data logging external (via included USB connection cable) And whishes from customers were regarded: - "Unrestricted Backlight" - Data connection with USB, no more with (the nowadays outdated and pretty rare) RS232 It´s maybe not a "El Cheapo", but it´s for sure a very good "bang per buck". Even now at the introduction price level. It simply want´s to play in a different class as the "cheapos". Which it is easily capable of - if it would/will be independent certified. Sadly it seems, there will probably be again two versions of this DMM: One international (as seen in the review) and one version (with more beefed up input protection, independent certified and hence a little more expensive) for the german/EU market. Why it´s not a certified one-for-all device, right from the beginning (like they have produced several other DMM´s)? Heavy to understand...
Totally agree, should be 1 version, and the input protection should be the same no matter which continent you are on. I'm awaiting to get more details on the German/European model if there is one and I will do a follow up review comparing both. Great information ..... Keep On Testing!
Hello bro, I get same multimeter befor 2 day and I have some problems. The multimeter had batteries installed. When I switch it on and try to muve between measurement options I get signal for low battery and multimeter get auto switch off. So I think this battery's its probably already finish and put new ones. Continue test of device and boom again low battery and auto switch off until I muve between measuring operations.. I checked the battery slot, noticed that one of the battery contact it's not like other a bit deformed in different way. But I think it's still oky to make good contact. I use device today and don't have such problem.. But I don't know what to do I have option to back it and get new one.. What u will advise me?
UT70D had the auto hold..I believe the UNI-T UT71 Series also incorporates this. I'm trying to think of another 🤔. Funny how such a useful feature is so hard to find.
Beautiful design and good build quality ... It has beep in diode range with green indicator, fast active continuity response and high resolution ... It is so far the best one of UNI-T multimeters.. I was searching for a multimeter that can measure 50 MHz and up for motherboard repairing but UT61E+ has the ability to measure 220 MHz frequency...OMG!!! It kills all...
Really amazing multimeter in terms of specifications..definitely in the big league! 😀👍
Wow! Great review, thanks Darren! Love it.....and i have been eyeing it now for nearly a year but can't quite justify buying it since i have maybe a dozen multimeters already....but man, it is so tempting!
Big thx! Yes, it really is a great multimeter, UNI-T definitely did a bang up job on the UT61E+...If I was going to buy only 1 new multimeter for 2021, this would be it!
@@KeepOnTestingHey mate, I know this review is a few years old. But would you still go for this in 2024 as a all round hobbiest/ electronics multimeter?
Chasing good accuracy and in similar price range or less.
Thankyou :)
Oh yeaaahh Thanks Darren for always keeping us abreast in the Uni T line up. I have bought 2 uni Ts in the past 10 months (UT191T and UT195) because of your comprehensive reviews, I do nothing fancy just Automotive applications and I'm loving it's shock proof body. Thanks again and Cheers ❤️love lots from the Philippines
That's great news EJ! Keep On Testing!
great review ... i always wanted a great multimeter years back and uni-t ut61e 22k multimeter with a bar graph was the best for the money. That was the dream then but when I actually bought one it was a different time.. I could afford a better one. After watching your review, refreshed old memories.. may be just for the nostalgia I will buy one!
Its a fantastic dmm. I'm really impressed with the quality and performance UNI-T have achieved. Definitely 👍 a trooper in the multimeter arena!
Perfect to venture into the electronic side of things as opposed to just electrical. Thanks for the review.
Well finally Unit has come through with some big and much anticipated upgrades and features on this completely new edition of the UT61E-! Not only a backlight which the old version did not have but one that stays on at the users command and sporting colorized alert with diode beep, wow. And hiow about that shielding, very nicely fit not just an after thought. Obviously some new software will need to be issued for the data link, but its just a software update away. Even more surprises in the audio and visual alert areas and more. The great thing is UniT appears to have been listening to its customer base and comments and responding in this new revision. Thanks for listening UniT, now just dot the I's and cross the T's to back up the price point and this one should be a winner and welcome major upgrade to its predecessor
Incredible isn't it...I was floored when I realized the backlight was permanent...talk about a great update..!
Hopefully the data link will be rectified soon..its a big deal for sone folks. Btw, the design is really growing on me..absolutely looks great on the bench. What do you think about the new look ?
Darren is like a kid with a new toy. Hope it lasts... the joy
Well, it's definitely an improvement for the UT61E. The screen is large and sharp. The indefinite backlight alone deserves a star. The color coded input.. Nice AAA batteries.. Audible diode testing.. I like it.
It's a shame that they rushed the release, though. UNI-T had had to work hard to get a reputation of a reliable manufacturer. I'm not sure it was a wise move to make the consumers wait for them to sort all the software problems.
I see it got a place in the top ten cheapos. I wouldn't call an $80+ multimeter a cheapo, but it's a good multimeter nonetheless.
And I would have to agree with Marcos Cano. The visual effects can make videos look more flashy. But at 18:32 they are too distracting.
As for the Christmas draw, I already got a multimeter from Santa. No other presents needed. Still hope to catch the Christmas livestream this year.
Well said ! Appreciate the feedback as always..I'll definitely take your suggestions to heart. Yes..the TOP-TEN CHEAP-O Multimeter list will be adjusted accordingly...its definitely not a CHEAP-O. Keep on Testing!
Just found your videos - perfect for me as I am trying to make sense of the various cheapo meters that are out there now... Thanks!
Great to hear Brian! Welcome aboard 😀
There's a CHEAP-O TOP TEN list, under the description.
Thanks for the early review on the new Uni-T 61E+. I was hoping this would be an easy decision to upgrade to from my current 61E. I am always forgetting to turn off the 61E and draining the 9V battery. This new 61E+ meter certainly fixes that issue along with backlighting. I don't need the hFE or the NCV features and echo the wishes for a temperature measurement instead. The price seems a little high to just run out and buy another but hopefully that will come down over time. Maybe they can come out with another upgrade (61E++) that will be more for electronics.
Hi Brian, I echo your sentiments. I don't know why they labeled the UT61E + as an Electricians multimeter ? It has no NCV and no weatherproofing/IP Rating...also no independent UL/Intertek Cert means it might not be sanctioned for professional use in North America. That being said, it's one great 👍 multimeter for the masses and the data logging feature (yes switched USB cables now works) is very fast and stable. Honestly though, if the improvements don't sway you then you're probably better off passing this one by, after all..its still a UT61E+ just leaner and meaner 😃👍
@@KeepOnTesting model ut161 for EU 😂
In the sound continuity mode (diode test), if you close the probes and hold and then open, the multimeter will still beep. And you admire.
I might treat myself in a few months if the price comes down. happy Christmas thanks for all the great reviews 😊
Happy New Year Dave! Its certainly worth the treat..exceptional multimeter!
This one looks great for a Uni-T DMM, in this price range is unbeatable! I love competition!
Agreed! Competition sure seems to be good for the multimeter biz.. 😀👍
I love watching your reviews! Really useful and informative
looks like 2 IR diode for USB communication, RX & TX probably like other high end DMM?
Those diode beep test is similar to fluke 87V, and I surely appreciate that additional green led indicator, fluke should take a note.
Hold button as backlight? I might miss my delay hold on UT61E, at least they should try autohold or similar to fluke's touchhold.
Funny though they use those ARM processor and keep at 22000 counts; for the sake of UT61E name series probably?
Clamping transistors looks nice and easy to identify (and get replaced with better TVS ).
Resistor network similar to UT61E, some people try to replace it with very expensive Caddock but then realize it's 22000 count with 0.01mV resolution, not much of difference.
No calibration trimpot? can be a good thing, supposedly more stable than those dreaded multiturn trimpot that keep drifted away, bad thing is you probably can't calibrate it yourself.
Things I'd love is 0.001 mV resolution DC (and AC if possible), slightly faster capacitance measurement.
They limit their max voltage measurements to 1000V, my mastech MY-64 survived many 1999-ish DCV with no breakdown and still going strong (it was 2000 count limited, hence 1999VDC max.).
I use that voltage mostly to test MOVs & TVS.
Correct, the Cyrustek chipset is 32,000 count so its definitely held back from its full potential. UNI-T did alot of things right with this dmm. No calibration trimpot makes sense and should help with stability over the long term.
The MY64 series is definitely a work horse!! Great info.. thx for your input 👍
How is possible this meter has capable to measure 20A current and is protected with 10A fuse? what's the part I not understood? I enjoy much viewing all your reviews.
Yes, definitely needs time be addressed!
With so many meters in your collection, even choosing which one to use could be a complex process!
Oh my, that's totally true..!.
last count I'm @300 multimeters about 50 of which are vintage...too many options ! 😄👍
The Reality is that just Fluke, Keysight, Brymen are the good ones, ALL the Chinese (even UNI-T) are not so good.
@@JohnUsp Fluke made in china
@@dark_xdark132 model "C", all other models are Made in USA
@@JohnUsp so what,made in usa is not as good as made in Germany，
and there are not many things made in usa in fact
backlight stays on, with shielding. definitely you should open the bottle of shampagne.
Excellent video and congratulations on the channel, I just ordered one of these, it looks like a great multimeter for electronics and home electricity, rich in functions and with incredible ranges. I hope NCV performs better on mine but it is not a feature that I will use very often anyway. Greetings from Uruguay
Thanks so much! I think you'll be very happy with the multimeter ...it's a fantastic instrument! Let us know how you like it 😊
Brand new, fresh UT-61e-II on the shelf. Bell clicked and waiting for your review.
I like the curves shape on select and hold buttons, Uni-t knows how to make beautiful multimeters. Great review 👍
Yes ! Astheticaly they really do design some of the best looking multimeters on the market 😀
Is it the upgrade of UT61E?? By the way it is a cool multimeter, very well finishing. But NFC is very poor & there should be temperature range instead hFE
Yes , its the upgraded version of the UT61E. All in all a spectacular multimeter with sone shortcomings but nonetheless a worthy update! 😀
Agree. hFE is very archaic (especially when there are transistors meters for few bucks), instead there should have been a temperature measurement function.
I watch your video reviews and am your subscriber.As always interesting, informative and a little humorous, I have another like.Thank you for your work, know that you are watched not only in America and Canada, but also far beyond the ocean!
Thank you my friend! It's very nice knowing that I have viewers across the ocean such as yourself. TH-cam has made the world a much smaller place and that's a good thing 👌
Keep On Testing! 😃👍
Looks like some much needed improvements have been made over the previous one. I hope the QC is good from unit to unit. Nice job on the review! 👏🏻👍
Sweet definitely sums up this update.
I think my USB Cable is defective hopefully a new one will fix the data link issue.
Definitely pleasant on the eyes..akin to that red Vondior Weather radio you reviewed not long ago on your channel..😃👍
@@KeepOnTesting I’m beginning to think your favorite color is red. Thanks for watching. 👍
Good Job :)
DMM minus :
1) smal fuse
2) very low voltage for the diode
3) NCV low sensitivity
4) no AutoHold function
plus:
1) hFe
2) good leads
3) backlight constans
4) new design
5) AA battery
6) good acces fuse
Summary:
in My opinion - old version is better
New design incorporates AAA batteries. I guess time will tell how well the update is received. Thx for the input 👍
Can't get enough multimeter reviews! Thanks Darren!
Thx Luis ! I 👍 i agree ..
Doesn't look bad at all... The speed of autoranging is good. I have several multimeters based on DTM0660 or some similar chip (UT139C, AN8008...) and while generally working fine, they are super slow in this aspect. But it costs considerably more than the classic 61E. Maybe at that price or slightly more, there is some Brymen meter with similar specifications...
Since it's brand new I imagine the price will come down eventually.
All I can say is that I really enjoy your reviews. Keep up the good work and MC&HNY
Thx so much Jim ! Merry Xmas
Holy crap! A backlight that stays on!!!
You Got it! What a pleasant surprise ☺
dang, that's truly near to perfection! a non auto-off backlight, easy access fuse, fast continuity, and very accurate, awesome! if only Uni-T raise the diode test voltage a bit to 3.2v or so, and make the USB function easy.. i don't mind about the weak NCV in this meter, but if they can make it strong for the cheapo ones, why not do the same for this meter? but nonetheless, it's still a solid meter. 👏👏👏😃
Absolutely 💯 in agreement...definitely a long overdue and worthy successor...I was sure the NCV was going to blow me away..but wow..its definitely in need of an overhaul..
@@KeepOnTesting yes indeed. now i wonder if the NCV antenna is MOD'able, maybe replace it with a copper coil or something to improve its sensitivity.. 🤔
Wow great meter n well built......Nice to see shielding n display backlight......
👍 Agreed, really impressive!
Have it on hands now. Not very well build, but okayish, in my mind.
@@atexnik Really? What are you dissatisfied with build wise ?
@@KeepOnTesting th-cam.com/video/u_2gFsJ0vtM/w-d-xo.html
Great video! Glad to have insight on this updated model. Thank you.
Keep On Testing ! 😀👍
good video,but if the meter for ELECTRICIAN the NCV function must add the SENSITIVE and have A choice for min and max be good .Thx dr.darren make A good video.👍👍👍
Thx Wilson, I agree, as it stands the NCV on the UT61E+ is really slow not very sensitive. hopefully UNI-T can improve that .Btw, I really wanted to demo the UNI-T Software with the new UT61E+, hopefully soon!
@@KeepOnTesting and Before i also have A software of UNIT but never use it and TEST ,cannot know how to use ,and good or bad,your video is very detail one for people take A look for buying A New meter.thx
Thanks for the review. Would be great to receive as a Christmas gift.
Fingers 🤞
Hi, I'm looking some extra features on this multi-meter, as an example if you press the hold button and turn it on is it how fast and how much count it will be(previous one, has a less count, but make supper fast measurement ) what about "ripple" AC on DC? why it go on overloading when nothing connect on it? TrueRMS bandwidth? Exclusion function through the range? Because everything that you show in your video we can make by 20$ multi-meter.
AIexey, it's a standard touch hold, no delay ...unextraordinary. I would use the MIN/MAX feature to hold a reading as it will freeze the reading indefinitely. Unfortunately this clip was negated in the editing . I'm not sure what "overloading" you are referring to. It stays on dead zero with nothing connected in Voltage mode, there could be sone EMF at play on the leads if near other electrical sources but its usually very good at zeroing. Yes, AC-coupled true rms measurement is desirable when measuring small AC signals in the presence of large DC offsets. However I could not review every feature in detail as I wanted the video under 30 min. Stay tubed, there will be more on this great multimeter in the future.
Hi, just found out today,, the screw hole at the back of the 60+ and 160 dmm is compatible with camera and phone tripods/phone stand, I mounted mine on it.
That's definitely a cool idea..multimeter on a tripod.. could come in very handy !
The latching on that continuity test, bang on! you could knock out a tune on it..or at least a bit of morse code! Fast! The 'stays on' back light? The stuff of testing awesomeness... Christmas is a coming..Will there be a Christmas edition on this channel? A 2020 round up? The best and worse of the year? I await the official word with bated breath!! (edit)... I pause the vid near the end to write my comment..then hit play to hear you mention the Christmas day give away...nice one! Your collection of Uni-T meters is astonishing BTW... 😍😁
Cheers my friend! I just about passed out when I heard the continuity..absolutely incredible! Probably the best continuity I've ever heard 👂 out of ANY multimeter I've ever used.. astonishing! A 2020 roundup might be on the table, I'm currently testing alot of gear so stay tubed ! As for my UNI-T collection..thx, it's definitely growing! 😄👍
@@KeepOnTesting I request you to please play Morse code when you find that a multimeter has good continuity, it was always my dream of watching it in your reviews 😁
Thanks for review What is the best for LEDs test light ALL LEDs and show voltage drop 61E+ Or 61D+
61E+ 👍
Just love the new styling of UNI-T, wonder if there are plans for a new 181A? I have the original of this meter and has served very well. Best wishes from Northern Ireland.
Its really aesthetically pleasing isn't it ? UNI-T definitely knows how to design a multimeter! Cheers Derek.
Thanks much this is my most awaited review. I have the 61d+ coming.
Excellent news! Let us know how you like it ! 😃👍
@@KeepOnTesting hi, just got the 61d+, i like it very much,, it was able to light up all my test leds,, diode open ckt voltage is 3.2volts. Ncv mode is good its not as weak as shown in your video, maybe I was lucky with this one
@@juancarlossandoval5628 Thats great news Juan !! Glad everything is good..it really is a great looking multimeter ! Keep On Testing !😃👍
@@KeepOnTesting indeed a great news,, even the pc link is working, I just got it tested now. Im using windows 10 version 20h2 latest version on a 64bit system ryzen 3 , 16gb ram machine.
@@juancarlossandoval5628 try to do a video review for the UT61d+. Does the UT61D+ the real electrician multimeter?
Great review! I saw this meter on ali express about a month ago and was waiting for someone to make a video!
I’m wondering if they used a 1A fuse to reduce the burden voltage on the meter. I’m curious what the voltage drop across the meter is at 200mA and whether or not the handful of ohms from a 220mA fuse would be significant.
It seems like it’s an upgrade from a 61E, especially as far as input protection goes.
Хороший обзор. Я только мечтаю такой купить, но не могу, я инвалид с детства и у меня нет средств купить себе такой замечательный прибор, если бы случилось чуду и мне кто-нибудь подарил я был бы счастлив 🙏
The first video on UT61E+. Much improved from UT61E : backlight, auto-off
You got it James..UNI-T hit a homerun with the UT61E+ ! I'm happy to be one of the first to review this great 👍 multimeter!
I just got my 61e+, too. I noticed the casing has a little bit of play near the gap on the right side, when squeezed. Is it same on yours? On 3:11 it seems yours also has that bigger gap on right side.
Great stuff! I have zero play on my unit. The casing is even and square all around the perimeter. During the review its possible my unit was not fully secured after doing a Pre- Teardown. Any one else have a similar issue on their new UT61E+ ?
@@KeepOnTesting this is how it looks on my device: th-cam.com/video/u_2gFsJ0vtM/w-d-xo.html
@@atexnik ahhh...thx for the video. Unfortunately I don't have that space on mine.. let's hope its not typical. Will you keep or return the multimeter?
@@KeepOnTesting since this is a minor issue, and considering the fact, that I've obtained it via a dropshipping company from China (hence, there's no way to return it), I'll keep it.
@@atexnik Good call!
I am agrees with you that, if Uni-T replace the hFE to Temperature measuring input.
Its a good point but I think uni t will not do that since they have a model on 60+ series with temperature ang loz function its the 61d+
Hi Darren , I had just look into my 61d+ internals and to my disapointment it does not have the shielding, maybe only the 61e+ have it. Also the ptcs,, mine only have 3,, and the high voltage precision resistor network the black retangle precision resistor is not present, solder mask is green.
Thx for the update Juan..wow, that's truly disappointing 😔 I wonder why the shielding was absent on the 61d+? As for the input protection , I suspected it may have been watered down on the other versions..thanks for the confirmation.
Another gorgeous multimeter from UNI-T
Yes, It's a beauty 😍
It transmits data through those LEDs so they must be Infrared. But how that IR signal gets converted into electrical signals for passing on to USB port? 🤔 ..... You should have tested and showed us the Hfe mode in video. What logic UNI-T had thought in that fuses in there?
Agreed, 😞 in retrospect I should have tested a transistor, would you consider the Hfe worthy of its own range on the selector?
@@KeepOnTesting I dream of it to be worth it on the selector as important as the temperature 🌡️. Don't be sad, cheer up and keep on testing!
Good day Darren,, question. Have you observe this on your unity legion?
There is an issue in low ohm measurement. In shorted test leads meter shows 1 ohm.The user manual stated if meter have higher that .5 ohm in shorted test leads is not normal. The meters are just appox 1 month from purchase date. Test leads are good. Tested it ony my 87v and sanwa cd771. This issue occurs on my 139c and 61d+ . 87v shos .3 ohms, sanwa shows 000. Unity both shows 1.1 ohms
Hello my friend..I will verify when I get a chance...thx for the update!
I have the old one, still loving it!
Nothing wrong with the original Santiago.. its a great 👍 multimeter!
Friend, help me with any questions please 1 - Do you think I can use the UT61E + for bench use for external use without any problem? I am a T.I technician and I use it for repairs to motherboards, fountains, desktop etc, and sporadically home electronics, 2 - do you think I made a good choice to sell my fluke 28 II EX to keep my money in my pocket and buy this Unit? 3 - Can I exchange the 10A fuse that comes with it for a 20A fuse? If yes, how many V would be fuse? I thank you for your help now and success in your videos congratulations for the content!
Most definitely the UT61E+ is a great bench meter! High resolution and logging capabilities its hard to beat! As for selling the Fluke 28 II ex, it's a classic 👌and well built. Honestly though, it's apples and oranges, two very different multimeters but fear not, the 61E+ should serve you well!
You could replace with a 20A fuse but keep the 250V rating as that is the spec. 😉👍
@@KeepOnTesting Thanks for the quick answer, do I also need to change the 1A fuse?
@@luizatecnica1491 Negative...leave the 1A fuse as is. 👍
@@KeepOnTesting TKS
Hello. I bought this multimeter a couple of days ago. A very good model for your money. The software works fine in Windows 10, but to download it, you need to solve a puzzle: there is one extra dash in the link to the program,before ._exe, delete it, and everything will load. What disappointed: weak NCV (not really needed) and there is no indication when the LEDs will ring ....
Hello, what a great test. Is the D+ more for the average hobby electrician ? I am having hard time choosing, not sure if i need the extra features on the E+
I would go with the E+ ...no regrets and you'll have one amazing multimeter! 👍
As I recall, you were going to breakout the bubbly with a cheao meter, but you could do it anyway and buy more for later. That meter has some pro ranges and good input protection; however, the higher cost and lack of UL, CE, SA, ETL or etc puts it in questionable position. I wonder about the data link. Good review--count me in the draw.
Cheers my friend!! I was at a crossroads.. its not a CHEAP-O but its definitely shielded...stay tubed for that bubbly.. 😳👍 I was miffed about the data link..absolutely a nogo...but I'm sure I can get it going..it just shouldn't be such a chore to setup.
Spot on EO, its chilling.. and will be un corked as promised...stay tubed!
The 160 series are CE rated, as per uni T website
@@KeepOnTesting I want to give you a smack for that 😏.....😂😂😂
@@juancarlossandoval5628 Yes that's correct. However, Conformité Européenneor or products that have received the CE Mark are not automatically considered to be UL Listed. This is, in part, because some product types with the CE Mark do not have to be third-party certified and are not necessarily compliant with North American standards.
Another great review. Thanks. The poor NCV, and the lack of a place to put a strap it's a no no for me.
Why UNI-t don't have NCV on their PRO series?
Great question..hopefully its one that UNI-T will address.
Just came across your channel, great review you deserve more subscribers
Thx Froilan! Slowly but surely...😀👍
Would be nice addition to my automotive tool collection. great review!
I love the way you do your reviews. If you are married or have a partner I bet she is jealous of the enthusiasm you put on this videos. LOL
Thanks so much! My beautiful 😍 Ukrainian wife only gets jealous if I spend all night in the lab! 😉👍
15:00 That is "superfast", but he is continue beeping after disconnect probes - that's a Problem.
Wow that shielding and input protection.
Truly awesome! They definitely took it up a notch!
Yeah, plus that good-looking design and gold tip probes... UNI-T is definitely stepping up.
Last month I purchased a UT89XD (my first multimeter) for PHP1,000 (about 21 USD) only, here in the Philippines, thanks to your review. Hope I can get selected in the draw. A second multimeter would be great.
Thanks Darren!
@@abaoaikiml.3436 Glad the review helped Aikim, good luck in the Xmas draw!
😃👍
great review Mr. darent.
oh y
if diode mode, short probe long beep or no?
Great review my friend. I'm confused, which one i should buy in your opinion: UT61E+ , UT191T, UT195E ???? I don't want it for heavy use, i'm not an electrician.
If you're not going to take it outdoors I'd opt for the UNI-T UT61E+..you get alot of multimeter in an extremely well made package! Second place goes to the UT191T which is a favorite of mine.. it doesn't have the resolution of the 61E+ but it's a superbly built multimeter with IP65 weatherproofing!👍 Both are great choices..
@@KeepOnTesting Thanks alot my friend for your answer!!! I 'll buy propably the UNI-T UT61E+. You worth at least a Sub!! 😉👍
@@km.productionsAwesome..!
😃👍 Great choice!
Great review! Thanks. Greetings from Uzbekistan ✌️
Hello my friend! Glad to have you on board! Greetings to all our Uzbek viewers...😁👍
Keep the meter reviews coming! Love these. This meter looks real nice. Crisp display, fast, and love how the backlight stays on.
It really is a gorgeous backlight! The UT61E+ has really grown on me and is now permanently on the bench!
Thank you for this great review.
Can it the frequency of the square wave be measured by this device?
Great question...I will verify and report back.
Software works like a charm on windows 10 and 11, i can confirm. Question, how can we calibrate this bad boy?!?
Wow looks like a nice Multimeter.I love the teardown video’s.
Its a beauty..Absolutely love doing the teardowns..!
Love that they use bigger movs and ptcs,,, downside is the diode test, my 139c was able to display forward voltage drop and lit all my test leds, this one seems not so as your test shows.
Excuse me Mr.Darren Walker.
Can you please help me to choosing my first multimeter??
Either richmeter rm219(zt219) or habotest ht118a.
Rm219 have 19999 count and habotest have 6000 count.
I don't know if i really need that Rm219 more count.
From what i noticed Habotest doesn't have relative button,range button.
And again i don't really know if i really need those button.
Will i get a hard time without those button sir???.
I want to use it for repairing broken stuff such as measuring fan capacitor,checking not working pcb,checking smartphone component that not working properly,etc.
What is your opinion Mr.Darren?
Should i choose rm219 ($23) or ht118a ($26).
Or maybe you have another recommended multimeter??
As you can tell, yes i am a newbie with no experience here.
Please excuse any mistakes as English is my second language.
Thank you.
HABOTEST HT118A is my choice from those 2 multimeters. Its proven to be a worthy contender again this year and is rated #1 in the CHEAP-O Multimeter Top Ten ! Lots of functionality and a great design 👍
Hello.
What's the difference between the 191 and the 61? Which one do you suggest?
191 is geared towards offsite, outside electrical work..It has great weatherproofing and a solid build. 61 is better suited to bench electronics. Both are stellar multimeters in their own right.
It's a shame not having temperature medication, but it doesn't really matter either!
in the UT161E version, everything is already fine with the protections! This is the European version, so European certificates CE/RoHS/cETLus
Muito bom.a uni-t devia ter feito logo com tela OLED.seria perfeito
Eu tenho o uni-t ut 61 e fiquei com inveja desse novo modelo
Talvez na próxima vez!👍
@@KeepOnTesting aí vai ser,uni-t ut 61e++😆😆😆🙏
Come on Santa! Bring it to me for Christmas! Thanks for a great review, and waiting for USB test! 👍👍👍
Roger that..hohoho 😀👍
CONGRATULATIONS Sebastián!! You won a new🏆 UNI-T MULTIMETER!!
Email : netplicity1@gmail.com with your shipping details.
@@KeepOnTesting Can't believe It !!! 🎅Thank you Darren, It was true, magical things happens in this channel ✨✨
@@SebastianQuinta Congratulations Sebastián...!💢💫💢! Send your shipping details to : netplicity1@gmail.com
Great review, as always!
I wonder what multimeter would you choose: UT61E+ for 76EUR, UT17B PRO for 59EUR, or UT191T PRO for 63EUR? Or some other DMM, even better, in the same ballpark?
I need it for occasional household/automotive/bench work
WOW..no pressue eh 😄 If I had to choose just one and I didn't need to use it outside just strictly on the bench I would opt for the UT61E+, it just impresses me more everyday. For outdoor/electrician use I would choose the UT191T as I love the smaller form factor, IP Weather proofing and independent UL/Intertek certification.👍
@@KeepOnTesting Thank you VERY much! UT61E+ it is, just needed a confirmation ;)
@@DanijelTama Great choice! Let us know how you like it.
@@KeepOnTesting Will do, as soon as it arrives!
@@KeepOnTesting Got my UT61E+ (+UNI-T MM bag +crocs) for 69EUR shipped :D
@Darren Walker does this Uni-T UT61E+ gives a continuous beep in diode mode when the leads are shorted?
Negative..no continuous beep.
@@KeepOnTesting i see.. thank you for verifying it, Darren. 😃
Can you measure resistance with the test socket? In mine, not only the resistance measurement with the socket works
Negative, the components tester does not measure Ω ..(at least not on my unit).
@@KeepOnTesting Thanks, in my review the socket work for capacitance, diode, continuity and hfe, but not for resistance. I thought it was strange.
Ouch. USB logging is what makes this DMM unique. I'd be livid if I bought it for that feature and couldn't get it to work. Other points: 250mA is too low on the low current side. Are those 4 AAA 4s or 2s2p? If 2s2p, they should have used 2 AA. Lastly, I think I missed the diode testing. Overall for $100, I'd expect UL listing, 600mA low current, and working USB.
The USB data logging was a real pain. Definitely should be working without all the hassle. I'll keep you posted.
Btw, it's running on 4 AAA batteries. Standard diode testing was nicely implemented with an audible beep and visual indicator. Definitely missed the UL listing and agreed, that mA range is too low for a multimeter in this price range.
Another meter with Bluetooth maybe to review is BTMETER 90EPD
Thx David...that will be reviewed early in the New Year !
Why was my comment deleted ?
I just mentioned that I owned two UNI T multimeters in close succession , and they both broke down , thereby presenting the question of reliability.
It would be nice to hear from others with experience of the brand regarding both reliability and unreliability, so that potential purchasers can make a slightly more educated guess before buying.
Why the censorship?
Hmm..nothing was deleted. I love the feedback. Good or bad its all relevant ! Reliability is important and so is price, build quality, performance, features and input protection. I think UNI-T has a real winner with the UT61E+
@@KeepOnTesting Thanks for the appreciation of my feedback.
My Meters were both 61A’s .
Maybe input protection has been enhanced on the 61E.model.
I agree with you that as far as performance and capabilities go,, Uni T give incredible value for money. As far as reliability and durability go, I’m not sure . I may just have been unlucky with my two- it would be good to get some feedback from other owners.
My personal experience with UNI T has just caused me to fork out on a Fluke.
This channel should definitely have more followers. Precise reviews. Good explanations. Did purchase a multimeter right after this channel reviewed it. Subscribed as well
Thanks Volker 😊 Slowly but surely we are increasing our subs. I really appreciate the feedback! Glad we could help you choose your multimeter. 👍
Keep On Testing!
@@KeepOnTesting Ask Dave from EEVBlog to mention it. This will push it's popularity
@@VolkerKtnbch Dave hates cheap multimeters. He shouldn't find out there's a top ten cheapos on the channel. He'd be livid.
@@numerical_error lol
wt-h 19:55 was convinced that some other window in the browser started.. completely out of synch to any relevance on the video and totally muffled your words.
anyway, thx for a great walkthru of this meter... though these inserted edits and sounds. 19:00 and fx 20:00 and likewise ohh boy' does not do your video any favors, quite the contrary.
and yep +1 for always-on backlight ability.
Would have like to have seen 18650 cells, but thats sadly not the "case" here where we still rolling with triple-As.. though better than 9v but would prefer 18650 LiIon's like we are starting to see on other DMMs / multimetertools.
Nice review. Which one should i choose, this or UT191T? :)
Indoor, for the Electronics bench or workshop..UT61E+, If I was an Electrician or tradesman using this daily, outside then the UT191T...Hope that helps! Both are great multimeters 😃👍
@@KeepOnTesting Thank you!
hello sir can you help me, which one is the best UT 39C+ or UT890D+ for automotive
With regards to automotive use, the UNI-T UT107 which has Dwell, RPM and a 12V Battery test... is a great choice from UNI-T. You can find it here: ebay.us/gL4QaV
Great video as usual! A bit underwhelmed at its performance tho... The original ut61e left rather big shoes to fill
Yes indeed Kunle..a daunting upgrade.
I guess only time will tell how well UNI-T did with this classic multimeter update !
I suppose if I didn't already have 8 or 10 meters it might be a decent purchase. But they shouldn't call it "Electrician" with no UL listing, crappy NCV and the other drawbacks. But when has China ever worried about their product claims matching the product?
I really don't know how they turned it into an Electricians multimeter either.. as you mentioned those shortcomings don't add up..Absolutely a great multimeter though..and why not make it 11 😀👍
Its interesting but after the UT61C was such a disapointment its hard for me to decide. The UT61C I have reacts like an old RS lab standard that I got in the early 90s and I actually have a $15 meter that reacts faster.
Well Frank...I don't blame you for being cautious.. absolutely worth the money though..UNI-T has a winner on their hands...and if you're not happy..heck..I'll buy it from you 😀👍
@@KeepOnTesting Darren, If I didn’t have to ship it, I would sell it in a second. Mind you I still have a VTVM that I got around 1970 but it just might outperform the UT61C. I am a sucker for a new meter, but what were they thinking selling it with an RS232 PC cable. I’m not saying RS232 isn't used anymore but I've been working on PC’s since 1982 (ZX-81) and I cannot remember the last PC with an RS232.
Hi Darren, I would like to request if you can verify this, " there is no manual ranging in capacitance mode on 60+ series? I was testing the capabilities of my 61d+ there is no way I can manual range in capacitance test.
Hi Juan, confirmed, No manual ranging in Capacitance mode..!
@@KeepOnTesting kinda sad,, I had found another shortcoming in capacitance test, it cannot detect short.. so when a cap is shorted it would just show OL not beep,, buzzer should sound like a buzzer sound in continuity mode once a short is present even in capacitance mode.
Cannot Wait TO Buy it
Добрый день, подскажите пожалуйста, какая максимальная частота записи показаний в память прибора?
What ADC does it use? The built-in one in that microcontroller?
Yes ADC is built into the IC HC32L130 32Bit/48MHZ Cortex CPU
Just bought one for testing, but must say that UNI-T should put the hFE testing up in their ***... would have preferred thermocouple support instead. No doubt.
The fuses seems to be a piece of gargabe, I even doubt they are real ceramic... Also, how can a CAT III 1000V/CAT IV 600V meter have 250V fuses?
Videos on Bilibili (chinese TH-cam) shows that this meter has good precision, just as good as an 87V.
Well, in the end it's a 70€ meter, so it's not bad after all. Time will tell if UNI-T fixed the bad drifting the old UT61E had and how well this thing supports ESD/Transients.
BTW: Too many innecesary video and audio effects on your videos. But that is simply my opinion.
Hi Marcos, thanks for the input..your opinion matters and I'm always appreciative of feedback, good or bad.
Yes the hFE is "interesting" and I too would have preferred Temperature in its place. Have you tried the data logging?
Definitely better built than its predecessor but time will tell how good of an upgrade we've got, I think its mostly good.
@@KeepOnTesting Well, I haven't tested the datalogging yet, and I think i will not be able to for a few days to come. When I have some time I will test it in various operating systems using virtual machines and let you know.
@@KeepOnTesting *Do you by any chance know how the LPF mode differs from the VFC mode of UNI-T multimeters? It seems that there is only one function - it is used to measure frequency-controlled drives, but why the designation on different series of multimeters, ONE AND THE SAME UNI-T company, is DIFFERENT ??? It turns out that there are some differences. And if there are differences, who is better? In general, I did not find such information anywhere, I googled everything. I would be grateful if you know the answer :)*
@@KeepOnTesting I confirm you the PC connection is working in W10 x64. You have to install a software which UNI-T has not even bothered to upload to their website. Found it on EEVblog forum uploaded by user "spidola".
@@marcoscano7998 Roger that. I've had the software running on W10 for the past week, mine was a USB Cable issue, new cable resolved my problem. 💥BTW, I've had the latest UNI-T SOFTWARE and Software Manual link available in my video description above, since NOV 30.
It's also been pinned at the TOP of the comments for over a week. He probably downloaded it from me 👍
Somehow strange: On one side it seems, Uni-T tries to build a pretty perfect DMM. On the other side it seems, they are hesitant to make the final step. And that can´t be explained solely with cost reasons.
Examples:
- The big beefy input protection gives somehow confidence. But no HRC-Fuse and no independent certification... Why not?
- Four AAA batteries are delivering not enough voltage for measuring the voltage drop of all kinds of LED´s... Really?
- Still no temperature measurement. Couldn´t be implemented in the RISC processor? Are you kidding, Uni-T???
- Personal regret: It seems, the (not documented) "delayed hold" function from the original UT61E has not survived. Why? That was a quite useful "easter egg"...
Nonetheless:
IMO is the new UT61E+ a pretty useful DMM:
- Accurate (and fast) measurements
- Higher than average resolution
- Fast continuity test
- Still fast reacting bargraph display
- neat and nice LED indication (continuity and diod test)
- Gold plated probe tips, therefor no contact problems
- Versatile usable with wide and sufficient ranges
- capable of doing data logging external (via included USB connection cable)
And whishes from customers were regarded:
- "Unrestricted Backlight"
- Data connection with USB, no more with (the nowadays outdated and pretty rare) RS232
It´s maybe not a "El Cheapo", but it´s for sure a very good "bang per buck". Even now at the introduction price level.
It simply want´s to play in a different class as the "cheapos". Which it is easily capable of - if it would/will be independent certified.
Sadly it seems, there will probably be again two versions of this DMM:
One international (as seen in the review) and one version (with more beefed up input protection, independent certified and hence a little more expensive) for the german/EU market. Why it´s not a certified one-for-all device, right from the beginning (like they have produced several other DMM´s)? Heavy to understand...
Totally agree, should be 1 version, and the input protection should be the same no matter which continent you are on. I'm awaiting to get more details on the German/European model if there is one and I will do a follow up review comparing both.
Great information ..... Keep On Testing!
Compared to 89xd, which one is better?
Oh my, this is in a different class..UT61E+ is definitely a step up, more capable multimeter!
@@KeepOnTesting ok thx Darren. So the habotest ht118a is still the best for budget multimeter?
Merry Christmas from Poland
Merry Xmas!
Hello bro, I get same multimeter befor 2 day and I have some problems. The multimeter had batteries installed. When I switch it on and try to muve between measurement options I get signal for low battery and multimeter get auto switch off. So I think this battery's its probably already finish and put new ones. Continue test of device and boom again low battery and auto switch off until I muve between measuring operations.. I checked the battery slot, noticed that one of the battery contact it's not like other a bit deformed in different way. But I think it's still oky to make good contact. I use device today and don't have such problem.. But I don't know what to do I have option to back it and get new one.. What u will advise me?
Can you send me a picture of the battery terminals? Email: netplicity1@gmail.com
@@KeepOnTesting Sure, I need 10m picture come.
Did u get me mail?
@@Bulgar1us Yes, I just replied.
One question Darren if you know what model of uni-t have the funtion “auto hold “ maybe with another name
UT70D had the auto hold..I believe the UNI-T UT71 Series also incorporates this. I'm trying to think of another 🤔. Funny how such a useful feature is so hard to find.
@@KeepOnTesting thanks auto hold is a exelent funtion like expensive fluke 87 V have for troubleshooting
I have a uni-t tweezer that has a dedicated zener diode mode that can light up smd led on led bulbs. Is there any multimeter that can do that?
UNI-T UT89XD, it also has a dedicated diode mode that's really powerful...one of the best for LED testing th-cam.com/video/pAovc5h12zg/w-d-xo.html
Thanks for another fun review that uni t looks like a great meter. The red would look good beside my green bosch meter.😉
Oh yea, Red and Green..Christmas 🎄 on the bench !
Thanks for sharing! Good job.
CONGRATULATIONS 🏆 XMAS DAY CONTEST WINNERS
Sebastián Quintá 💢 Raster Mania 💢 Farooq Rahim