If you’d like to support my channel be sure to like, comment, share & subscribe! Don’t forget to click the bell 🔔 icon to be notified everytime I upload a new video!
Awesome collection of Henry’s also please don’t destroy James 🙏 he could be back again, also can we see hetty mess test soon like hetty 160 vs 1993 henry it would be satisfying:)
The squeaky sound means that the bearings need oiling, probs because you left it outside. Apart from that , the motor sounds sweet. Lesson of the day, don't store vacuums outside, or you'll destroy them . Why did you store it outside?
Hello I am after numatic. Bases to make flower pots I’m after a George for the dad so if you don’t want it always here to reuse it again thanks for your lovely content
5:23 maybe it was the plug most of the time the plugs is not done properly??? I’m just guessing btw bc if the cable worked from the cream and brown henry I thought it was the plug 🤷♂️
I've noticed some Henry's have the dustbag holder which is straight and has a circle fitting and the newer ones have one that's a bit tilted. Are they interchangeable?
Switch should be alr mate on the James my mums Henry before I fit a new motor had its switch and got wet stayed outside for 2 to 3 years and the switch works like new
Have you heard on the Dyson university in malmesbury? That is a dream for me to go there!!! Also one more question does the UK have a Bissell PowerForce bagged like the 3522 series but UK version? If so can you feature one on the channel???
Yes the university is quite cool isn’t it! I hope you can get the chance to study there! ✌🏽 also regarding the Bissell we got a similar vacuum which I have done a video of, it’s the red Argos upright vacuum 😄
Yes the university is quite cool isn’t it! I hope you can get the chance to study there! ✌🏽 also regarding the Bissell we got a similar vacuum which I have done a video of, it’s the red Argos upright vacuum 😄
Awful machines bulky old fashioned and useless . And they are rubbish on carpets as the brush bar is terrible it dont pick up good on carpets. Ok for wooden floor or laminate but Henry is awful on carpets. And no use atall if u have Pets. Avoid
I like how almost 5 of them are called Henry 😂
Awesome collection of Henry’s also please don’t destroy James 🙏 he could be back again, also can we see hetty mess test soon like hetty 160 vs 1993 henry it would be satisfying:)
The squeaky sound means that the bearings need oiling, probs because you left it outside. Apart from that , the motor sounds sweet. Lesson of the day, don't store vacuums outside, or you'll destroy them . Why did you store it outside?
Lovely collection mate. My parents 1992 henry does the same sound as your henry at 5:02 on the wind down 😂
That Numatic George looked decent. I wouldn't destroy it
And this is why you don't store things in a garden shed and use them bagless...
True
Enit
@Palextuckergoldfishno you can't
You can probably change the outside pink colour to red by using a blow torch, possibly even with a hairdryer.
That George machine you could either replace motor or give the motor a good clean to see if that improves it first.
I use to have a 1993 henry
Hello I am after numatic. Bases to make flower pots I’m after a George for the dad so if you don’t want it always here to reuse it again thanks for your lovely content
You do good with numati cs!
5:23 maybe it was the plug most of the time the plugs is not done properly??? I’m just guessing btw bc if the cable worked from the cream and brown henry I thought it was the plug 🤷♂️
I think you may be right!
:) i hope he can be fixed fingers crossed 🤞
I got idea get a Henry cordless and use a aero brush bc I’m bout to do it to my own
You know those non rewind Nuvac hoovers do you have any
I've noticed some Henry's have the dustbag holder which is straight and has a circle fitting and the newer ones have one that's a bit tilted. Are they interchangeable?
I’ve only ever seen one type of dustbag holder on Henrys
Great video
Thank you!
u should get a non genuine tool kit for ur Henry and do a durability test
Do the autosave Henrys have a modified PCB board that won't make it cut out like they do?
It's not abt modified pcbs they wouldve been better if they had a cover over the pcb preventing it getting shorted by carbon dust
First and RIP cream&brown henry
Switch should be alr mate on the James my mums Henry before I fit a new motor had its switch and got wet stayed outside for 2 to 3 years and the switch works like new
Can you use the same Henry Hoover bag over and over a few times
Nope, the pores of the bag will clog and overheat the motor
That’s why you don’t use he use Henries bag less,
Have you heard on the Dyson university in malmesbury? That is a dream for me to go there!!! Also one more question does the UK have a Bissell PowerForce bagged like the 3522 series but UK version? If so can you feature one on the channel???
Yes the university is quite cool isn’t it! I hope you can get the chance to study there! ✌🏽 also regarding the Bissell we got a similar vacuum which I have done a video of, it’s the red Argos upright vacuum 😄
Yes the university is quite cool isn’t it! I hope you can get the chance to study there! ✌🏽 also regarding the Bissell we got a similar vacuum which I have done a video of, it’s the red Argos upright vacuum 😄
@@parwaz7861 oh ok but yeah it's my dream to go to the university it's really in my words luxurious and the acceptance rate is super low but thanks!
The glue repair was good because I broke it so I use it bagless
That squeaky noise is just dry bearings use it for a bit and it will go away
The james vacuum didn’t seem that old, how did it die, like did the motor just stop or did it make a bad sound?
I suspect the impeller got loose somehow
@@parwaz7861 the motor sounded goosed
could you possibly vacuum up water with the henry 160 you were going to smash , id love to see the result lol
I’ll give you the result. It will blow up there you go
What colour of Numatic does not fade?
They can all fade
I have a old Kirby that has rust on it so I think there is rust on the motor
Hay do you live in Newport or Cardiff or Bristol I want that george
If you use them bagless then dust will get into the motor hence break it. Pitty really as you've got a good collection there.
I own a CY28
Smol bbs.:(
4 months ago actually dunno why I said last year 🤦🏽♂️
Please don't smash that James, that is actually the more rare verison with yellow motor cover. And it still looks quite nice.
They aren’t rare at all mate that was a big standard JVP180 millions about they still make them
What makes you think they're rare?
I would of saved the George.
The squeaky noises is because the bearings are dry
If the 1993 henry is in good condition why is it in the vid
Are you going to be giving that 2006 Henry back to your auntie since you've got a BNIB one now and that one is still sentimental to you
I’m not sure what I’m going to do with that one tbh
@@parwaz7861 I mean you could just keep both🤷♂️😂
@@vacuum_collector26 I think I’m gonna fix the broken 2006 Henry and use that actually 😄
@@parwaz7861 good idea you can use the broken 2006 Henry and the BNIB one you can keep just for show
Can you do an after repair/refurb video on the 2006 Henry when you've fixed and cleaned it
Rip cream and brown vac
U copied my comment
@@ArchiezAviation bruh
@a roblox user bruh
Srsly
Yo could you give me the James i will fix it up please im begging
Pls dont destroy numatic george if you dont like it you can send me it
Still not sure if you’re filthy or clean. 🤔
Eh?
I assume you're referring Parwaz to be filthy because of his collection of vacuums being a bit dirty. It doesn't make him filthy. 🤦♂️
Please don't smash the Cream and Brown Henry as it's vintage and uncommon and the James is cool too please don't smash that either
I’m scrapping the cream and brown Henry unfortunately because it can’t be fixed
@@parwaz7861 what's wrong with it exactly?
@@vacuum_collector26 I shown all that’s wrong with it in the video
@@parwaz7861 I thought more would've broke on it. Can't you fix the screws or glue it back and not use it bagless
@@vacuum_collector26 screws will no longer fit so it’s now scrap sadly
My heavy vaccuum has a burning smell
It’ll be the motor
@@parwaz7861 How can I fix it?
@@NovaSky986 it will need a new motor
@@parwaz7861 Omg how will I do that? Can you sort it out for me?
@@NovaSky986 ill do a video for ya mate
Awful machines bulky old fashioned and useless . And they are rubbish on carpets as the brush bar is terrible it dont pick up good on carpets. Ok for wooden floor or laminate but Henry is awful on carpets. And no use atall if u have Pets. Avoid