Screen Protector for a $120000 Car! | How to Install Xpel Paint Protection Film PPF
ฝัง
- เผยแพร่เมื่อ 21 พ.ย. 2024
- Paint Protection Film Resources
www.xpel.com/p...
www.xpel.com/p...
suntekfilms.co...
www.ppffilm.co...
premiumshield....
films.llumar.c...
MyTintStuff.com/
Tint Knife: amzn.to/2lWpArC
Stainless Blades: amzn.to/2D63SM9
Felt Card - amzn.to/2JMkk4T
Squeegee: amzn.to/2CSJV8k
Conquistador: amzn.to/2E7kH5t
Heat Gun: amzn.to/2CG8mZ4
Door Cover: amzn.to/2EiXoWH
Tint Apron: amzn.to/2E8gRch
Razor Blades: amzn.to/2Cok5If
Camera Gear
Canon Camera: amzn.to/2Ar2ZI7
Sigma Lens: amzn.to/2AqFFu0
Sennheiser Mic: amzn.to/2CD8Te7
Camera Jib: amzn.to/2CCi0fc
Camera Bag: amzn.to/2CrvmYe
That ZR1 is a monster.. It will smoke the new vette C8
Not bad, considering you were using gel as a tack solution. Next time use an alcohol/water mix to tack, you will find it install much easier. You would've had a lot less difficulty with those fender inserts and fender body line if you had started there. It's easier to line up the outside edges than trying to squish the film to fit somewhere in the middle.
Good on you for getting on it even though you are out of practice, most are too scared to even try.
And thanks for the tint tips, your videos are great.
gives me a greater appreciation for how challenging this work can be
Please post the bumper and hood if you can. You explained it better then the teachers I learned from
With covexes and curves like on top of tacoma hoods, wait til last and use your hand to push hard and lay it down gradually. Follow your hand with a soft squeegee. Upwards.
Ppf is hard and time will build skill. If I were a customer I would have asked for a redu by the head lights. A few washes and it will start to build an edge that you can see. But good job brother, keep up the work
Yea just like tint, it's very much its own skill. Wish I had more consistent experience going into this situation. Shop literally handed me a kit and said do the best you can.
TintStuff do a lot of plotter cut ppf, black and white paint such a pain in the ass. As long as they didn’t rush it out, owners don’t usually realize the difficulties of clear bra film installations
Xpel is doing classes in San Antonio as well to teach ppf.
Mucho thanks, I have to do a very small custom xpel thing with a small cut-out, and feel more confident now with these tips.
Reason those fingers wonr go away around your cent corner is because its not lined up and is overhanging so the water is just shooting right back in. If there was an edge it would just squeegee out.
All thise fingers can be stretched as you go. Main thing is make sure youre checking what the best way to stretch is at every tac point. You have to READ the stretches. every finger can be stretched to go away if done correctly
Question, don't you need to apply more pressure with the squeegee to get all the solution out? It looks like your lightly going over the film. Great job.
Looks good but you think that edge will start to peel up after a few washes?
Also does the squeegee leave scuff marks on the film at all?
Last question:
Do you own the shop?
Video randomly popped up on feed and interesting tack and start point that's for sure. Definitely wouldn't put this in the how to do clear bra category though.
And if you have an edge you can over hang from stretching so much let it and cut it later.
Hi bud , I think your a badass doing tints , but for ppf your just doing all wrong , first , precut Kits are limited to wrap the edges and hard to stretch the best is work with custom pieces , second the solution , you don’t need all of that shit from xpel , all you need is softsoap hand soap antibacterial and regular tap water , and instead of hand sanitizer use 70% rubbing alcohol works the best if you use 70%tap water , and 30% alcohol, third , wrong squeegee, use 3m black rubber soft squeegee, the one you use will leave a lot of marks on the film , , fourth , you don’t need steamer if you just stretch good at the beginning, and you forgot the most important tip ! HEATGUN ALL EDGES TO AVOID PEELING, If you need more tips follow me on instagram geoproppf_chicago btw I suck doing tints ! 😁 good luck
AGREED! So many things wrong with this ppf installation. Definitely not a how to by any means!
Great video brother! 👍🏼👍🏼
What's the maintenance schedule like on stuff like this? Remove and replace every year, every other year? I see a lot of well-intentioned wraps and these protective films burnt on in the junk yards. If you let them go in the sun, does more harm than good.
Can you do vlogs of window tint you do in your shop? The unusual window tint jobs would be great to see :D @
TintStuff
can you buy paint protection film that isn't precut? I was thinking that would be something good to place on the front of a vehicle, especially the hood and maybe behind where the tires are and the lower part of the doors to protect against rocks and debris. The lower half of the vehicle seems to need it most.
In your opinion what harder to learn ppf or window tinting whats harder for u to do tint or ppf?
Screen protector for a car??
Hey I am from India I know window film and PPF I want to work on your shop because your work its to good.. reply Me for more information
Paint protection film. Lol. If your that worried buy it and look at it in the garage. Otherwise figure out Kitts paint and paint your car like that. It’s a car. Not importantly Life. And I love and have expensive cars. Just learned over time
What a dumb fucking comment. this helps resale value, keeps your vehicle in good condition. It's called protecting your investment, get a clue.
So way it works wet the area put ppf pf top then squeegee the liqued out
I'd ask you to redo that panel.
what is the spray bottle and hose attachment you use? Seems a bit better than a typical spray bottle for tight areas and has more pressure
Do you need PPF sunfilm installar
Great presentation
You don’t wrap edges?
Çok teşekkür ederim çok detaylı
I want ppf. My car with headlights done too.
head over to www.driveprotected.shop to find the PPF for your vehicle!
Untuk kekuatan bertahan berapa th
Hey I had a question what’s the bet tint to buy
lots of good films out there, I personally use Avery Dennison right now.
TintStuff what about formula one pinnacle ?
Thanks for the video, but “just a ZR1”… c’mon. That’s a monster of a vehicle
At 3:38 I heard a FART 💨 😅
Wat does something like this cost
Genevieve Fork
Bad install man. You should have removed and applied it correctly, unless you didn't charge your customer. You should have lined up the headlight first, with an EVEN gap. Then tacked it and moved on to your fender corner or around the side scoop. You always have to make sure that gaps are even. While it may be hard to see the uneven gap around the headlight now, it WILL show in time, as the line will build up with dirt and it will show. Next time, take your time and have patience. PPF isn't hard, but it takes time.
Top 10 ,,, muito bom
Can you do a precut front windshield tint installation?
Pre-cut kits don't hardly ever work for the windshield. I tried a number of different kinds of software and the patterns are almost always off. the sides and back are better depending on the software used.
Is it just as easy as window tint?
sprayer gun as you can find on amazon?
🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼
5000M likes
Just a ZR-1?? Really slumming it, man.
If you've seen his other vids--he does a lot of tongue in cheek humor. Good dude
As do I lol
anyone heard the over lapping voice 2:08 - 2:10
Did you just downplay a zr1 for a measly c8? Dude! What’s wrong with you!??
Just use Johnson &johnson in the water to apply it and smells great
Its "just" the ZR1 😂😂
Haha
Unfortunately it's just the ZR1???? I stop watching at that point.
"unfortunately its a ZR1" lol
put sone silicone on the edges. just a thin layer so that it wont come unpealed
That is not a $120k car
Just a ZR1 lol.
DO NOT DO THIS! I did this to my car and it messed up the paint.
This is a 3-5k$ job is not going to do nothing to the paint if install the correct way.
You probably use a les quality film, or solution.
It's just a ZR1 hahah