Toyota Tundra Rockford Fosgate and Pioneer car audio upgrade
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- In todays video we have a Toyota Tundra in for a system upgrade. We are taking out the Factory JBL system for a new Rockford and Pioneer system.
learn more about wire ferrules here
• What are wire Ferrules...
12 to 6 volt converter
amzn.to/2ktD8uX
RP4.2 TY11 Toyota smart harness
amzn.to/2jYUuwg
Factory camera retention CAM-TY12
amzn.to/2kZntAc
factory USB adapter USB-TY2
amzn.to/2kZ9FWk
video on Bass blockers
• What is a bass blocker...
music in video listed in order
Artist Silent Partner
Dark step
New Phantom
Crystals
Busy Beat
So satisfying that the owner can go back and watch this video and see the quality and craftsmanship on his install...much respect guys...y'all on another level
Christopher Jefferson I hope he thinks so, thank you.
GREAT VIDEO!! I forgot that you guys made a video. This is my truck and I can say that it sounds incredible and the install is beyond professional. I am VERY VERY VERY happy!!!!!
To clarify a few things:
Their disclaimer at 11:05 - yes, they recommended Fast Rings and DynaMat... I cheaped out on that... my bad.
Mix n match system - again, my choice to save a few bucks. I was given 3 choices:
1. Higher dollar swap out (basically the same system except sub in: HSK 165.4, Alpine PDX-V9, Fast Rings, DynaMat, etc...)
2. Save a few hundred and you see what I got.
3. For even less, keep the factory headunit with a DQ-61 and basically the rest of my system.
I kind of regret not going with option #1... but my system sounds AWESOME so I am not losing sleep. I sold my factory JBL system complete for $800+ online and got a $150 Pioneer rebate which would have way more than offset the extra $$$ in option #1. If only I could have a do over.
Last thing... the dark gray install kit that goes around the headunit was all that they had in stock that day. A few days later Dean swapped in the brushed carbon metallic trim to match the dash in my Tundra 1794.
This is the 3rd vehicle that Dean has put a system in for me. I had no idea how much work he puts in that can't even be seen when your button up the dash and install the seats. WOW. I wouldn't use anyone else. Did I say that I was happy with this system?
Eric B thank you so very much Eric. Thank you for sharing also, that was great. I'm glad you are loving it. 👍🏻
Eric B how much did everything run you?
Could you send links of the stuff that was installed? I’m about to put a system in my tundra
I just got a 2020 tundra crewmax that I want to have a new system put in. These guys really take their time and do the job right. I wish these guys could do an install for me.
Good for you. It's a process, man; you want everything, but sometimes it's hard to say goodbye to the cash. We have all been there at some point... typically after marriage. 😆
Dude....you two freakin rock! I never realized how much work goes into installation. I use to feel that I paid so much for the equipment and I would get the cheapest installation. Not any more...thanks to you guys.
Dean anytime you wire an amplifier or stereo harness its magical what you can do love watching you wire anything up and Fernando he's the same way with door speakers love the vlogs
About to buy a Tundra. Throwback
Started watching these recently and they are very informative and fun to watch. Y'all don't do nothin crazy, just normal dudes doing what you enjoy and having a good time with it. Keep up the good work!
Evin Sprague thank you very much.
Soo refreshing and relaxing to see someone use two mixed car audio brands together
Automotive Guru yes but it does push my OCD to the limits. 😀
After wks & wks of research went w/
Pioneer AVH-x491 & GM-D8604
Rockford Fosgate component spks.
Thx for the vids.
That Tundra looks really clean. I'm sure clean vehicles make your life as an installer better.
These cats are the best installers on the Trons. Keep it rollin fellas...
Dean and Fernando, watching you guy do installs makes my ocd happy.
Rob Meyer right, mine to:)
Awesome video, awesome work. Great channel.
Trapperjohn1000 thank you very much.
This is a good car audio channel. You guys keep things fun and simple.
Jarred Monaco very nice, thank you
Well done fellas. I like watching your installation vids. I appreciate the time you guys take to do these.
Brian Miles thank you Brian, they are fun to do.
Finally! A Tundra video! I really enjoy your videos and the excursions to Disney!
My Tundra has an old school Alpine double DIN touch screen, navi, SiriusXM, DVD, Alpine Audyssey Imprint DSP - GPS no longer works - want a new ILX107!
Boston components (no longer made) on all 4 doors- Rockford P3 shallow mount 12, Punch 300 watt on the sub, Punch 400 watt on the highs-
Now waiting for an old school Pathfinder/QX4 or '13-'18 body style Avalon video-
1999 Nissan Pathfinder has nice old school Alpine single DIN and Audio Control preamp/equalizer, legendery old school Alpine V757 on 2 Rockford 10's in a sealed boc, a newer Alpine 4-channel on Boston Rally 57's on all 4 doors (over 20 years old) and Polk Audio tweeters on the front doors-
Avalon is still stock because I haven't seen a dash kit I like- might leave factory head unit and improve all else-
Considering a 12-14 hour road trip to get you guys to do it for me.
Your work is top notch. Dean's explanations are great. Fernando doesn't talk much, but does great work.
you guys are awesome, that moment when you're wiring the amps and stuff is so satisfying
Elias Fernando De La Rosa Lopez cool, thank you very much
The installed was amazing , same as the chosen truck . Thank you so much for sharing your knowledge . Love the fuse bracket and amp board.
TTacoma thank you, they do look nice:)
Awesome, looking forward to the video on my BRZ
MotorHeadGreg me to, just not look forward to editing it😄.
Very clean work. Now I'm skeptical to try anyone else, if I do I hope they do a clean job like you guys did. Very satisfying for a guy with OCD. Lol
i learn something new every video i watch of you guys work. keep up the great work
swagg so smooth23 thank you
you videos are the best guys.. keep up the good work... i watch them so much i have to go backwards every night to get a new episode... you guys keep it real thats the best part.. thanks
Perfection as always. Love these videos. Thanks again for making car audio fun again.
Clint L you bet, thank you for watching.
I would love this set up
I think I'm going to get a torch and heat shrink tubing and sleeve every cable in my house lol, looks so cool.
Super clean install..nice job guys!
Adam Geggatt thank you Adam
I like the abs y'all use to make the car more stelf on. wires and all
junito413baby thank you
I love these types of installs. More videos of this pls :D
Pontus Ostling thank you. There coming! Time!
Good work. Can't stop watching you guys work . Love it.
Best work I've seen. I had no idea you guys were in Clearwater! Literally 30min from me. I'll be seeing you guys in the near future
Philippe Strapko thank you. Make sure you tell Paul you saw us on TH-cam
My new favorite channel. Love the work. Nothing but quality work from you guys. Feel like driving down there juat to get my audio work redone...i need alll new wiring, speaker wires 3 amps, .... too far though..lol
Just discovering this video, you guys are amaaaaaazing wow
Very nice work, quality and attention to detail was great here. Its hard to find quality stereo guys now.
bryanviper thank you
You guys do great installs and I enjoy the videos. Have a great weekend and continue much success ✌️
JustEnufCustoms thank you very much, to kind.
I wish you guys were in vegas, I'd have you do that to my Tundra. Good video as always fellas.
Alright! Yes! Been waiting for these kind of installation vids. Please make more, I love them.
I just started watching your channel last week and I love the quality & pride of work you do, it really shows. I wish you guys where here in the Seattle, WA area cuz you would be my go to guys all the time.
Hawk L thank you, definitely a place I want to visit one day. Fernando is a big Sea Hawks Fan.
Also your installing same d-class pioneer amp i installed:) best amp ever ! Your going to have one happy customer:)
trev neuzerling he was very happy with the way it turned out, thank you.
that PAC stuff is a burn..great video as usual
I've got a 2007 Tundra double cab.
Im purchasing my system in parts.... so I don't spend SO MUCH CASH at one time.
I've got a Kenwood DDX6906S, an old school Alpine MRD-F752.
Spec on the amp,
4x75 into 4 ohms @ 0.08% THD
4X100 into 2 ohms @ 0.3% THD
SUB,
250X1 into 4 ohms @ 0.3% THD
I just can't decide on my speakers. The Focal and Audio Frog, are my two lead contenders. Ive been thinking about using the Audio Frog GS10, GS40 in a custom pod on my windshield pillar. The GS690 in the front doors. These would all be active crossover.
The problem with this setup for me is Audio Frog doesn't have a shallow mount sub. (At least to my knowledge they don't).
My second idea was to use Focal PS 165 FXE
Performance Series 6-1/2" bi-amplified component speaker systems in the door.
And use this under the rear seat.
Focal P 20 FSE
Flax Evo Series shallow-mount 8" 4-ohm component subwoofer.
The only problem I see with this: is that I've only got 3.5 inches of depth for the sub. That only leaves 1/2" of space between the magnet and the bottom of the enclosure.
Or my last and least favorite of the 3 choices is to use the Kenwood Excelon KFC-XP184C
Excelon Series 7" component speaker system
And possibly build a custom enclosure with two 6.5 Subs in approximately 1.5 cubic ft of air space.
What would you guys do?
Looks like the same sub and box as my Tundra. Was on sale for $500 including a 300 watt Punch amp. Then I printed a $100 coupon from Rockford's website. So, $400 for a Punch 300 watt amp, a really pretty sealed box, and a P3 shallow 12!
You guys are AMAZING!!!! Thank You Soooooo Much for sharing all this content.
I HAVE ONE TO ITS A 2400 AND I WILL RUN ABOUT 1200EACH ON MY AMP THE 2 CHANEL AND I HAVE THE BOX SUBS TO YOU GUYS ARE VERY COOL
Pretty cool you did this install in 20 min!
Like your work , clean and professional:)
I subscribed:)
trev neuzerling thank you for that!
Tesa tape all the things. Love that stuff
Super clean install as always !!
KlipnotiK thank you
The best install I've ever seen. Even taped the dash. Nice job where are you located. I want mine done
Very nice work, awesome video.
George Kormos thank you
My favorite channel
Thank you
Great stuff I may drive from Orlando to Clearwater just to get guys to install a carplay system in my 2017 Camry :-)
khalid zaoui we just did a 17 Highlander today. Turned out great, give Paul a call 7272166170
Five Star Car Stereo I will thanks 👍🏻
Thanks for giving us tips nice install
gilbert reyna you bet, thanks for watching
Love the install videos keep it up! I learn cool tricks every time
pieters08 we will, thank you
another great video
newls1 thank you
Nice clean work. My only question is why don't you crimp your ferrules?
HEY I LIKE YOUR COOL VIDO YOU GUYS ROCK WITH ALL THE COOL STUFF YOU HAVE IN YOUR SHOP
Both vehicles have Optima Yellow Top batteries. The Pathfinder has a huge cap. I guess a second battery has taken the place of big capacitors these days.
Awesome time lapse!
Austin Dillard I wish we could move this fast in real life
Five Star Nation Baby
great content as always!
Ivan Zamora thank you!
you guys need to do a 2014-2017 impala .....great work also
Daren Holbrook yes we do, we will keep an eye out. Thank you
Échale ganas Nando saludos carnal 💯...
Awesome work as always
I love the work you guys do. I also have a Tundra (2018 Platinum) with the JBL system. Ive watched the Tundra videos you guys have done and am ready to take the plunge. Do you sell any of the custom brackets you made, and I’m sure have templated? I am especially interested in the ones used in your Focal 3 way install video. Arizona is a long way to drive to have you guys do the work😂. Ive been following you for about 4 years now and as a commercial instrumentation and automation integrator in my job its nice to see someone else take pride in their workmanship. Ive already learned a few tricks from you guys to make my install go smoother. Thanks again for the videos and humor…
I DO KNOW THAT YOU GUYS ARE FAR A WAY DONT KNOW WHEAR BUT IN MY STATE OF FLA JACKSONVILLE. I GO TO A PLACE CALLD DADDY O IT A SHOP TO THEY DO GOOD WORK TO
Beautiful stock like work👍
Awesome video quality work 2 thumbs up
Thats a clean install!!!!!!
Guido T thank you very much
Nice I will need visit u shop
it bothers me when the budget doesnt include deadening the doors. it might just be me though. After deadening my doors it was night and day and i will always deaden the doors i do now. At least 70 percent coverage will improve midbass.
pop032292 I agree 💯, that is why we put in the disclaimer. I knew people would ask.
Five Star Car Stereo how many sheets of roadkill does a 4 door truck need?
top job as always guys keep it up !!!
Good work gentleman
Kevin Braithwaite thank you Kevin
thanks for the video guys I love them
The Beige Wonder thank you for watching!
Really nice install
Ibrahim Alghamdi thank you
Nice video excellent job guys 👌🏽👌🏽👌🏽
Salvador Saldana thank you!
As usual you guys did another super clean install. Thanks for sharing it with us. It looked like you slid a tip on the amp hot wire but did not crimp or solder it, did you just edit out the crimp/soldering step or is that a tip that is friction fit?
yes....I was noticing this too.
Where can I find those adapters?!?!?
Tim datoolman it is a wire ferrule. It is a sleeve that goes over the wire. It keeps all the wire together so when you screw down the wire it does not separate. The heat shrink is just to hold it in place and look cool. I'm guessing there is going to be a video on these next week.
Justin Murphy we are going to do a rush video next week with all the information on them. Thank you for asking
Five Star Car Stereo good job, very professional, where are u located? I would like to improve my truck sound system, I have a tundra too...
Awesome work awesome you guys !!! Excellent video !!!! Your the best !
Jorge Gonzalez thank you Jorge, that is very nice
great job fellas
Tim Te Rupe thank you Tim
Nice team to make nice job👌🏻👌🏻👌🏻👌🏻
peluche sound thank you very much.
Great video, I would like to know If I can run this system in my truck without upgrading the speakers, I have a 2019 Toya Tundra 1794, w/JBL SYS, thanks.
Clean install
julio bello thank you
Great work guys, I really enjoy your videos and the attention to detail you put in your installs. In the video you said that the amp is powering the front door speakers and the 3.5" in the dash. What is powering the rear door speakers?
+Anthony R thank you. We are using a small Alpine brick amp 445u for the rear speakers
It doesn't matter what you did Doug.
I thought you guys used 100%cooper power wires when doing installs🧐. That blue power wire doesn’t look copper my friend. As long as the customers happy right?
Love install vids.
Kornnut me too!
Do a Harley! I have a small system on my Road King- an Audioformz Bluetooth receiver, a small Alpine amp and Rockford 2-way 6 3/4" speakers in the saddle bag lids. I want a system on my bicycle, even if it's just a JBL Flip 4 Bluetooth speaker strapped to the handlebar!
Nice work. I just had a shop upgrade my jbl system in a Tundra also and they put the amp under the front passenger over the outlet of the floor AC vent. It looks like this amp is doing the same, Did this amp block the floor vent?
Great video... thanks
John Furious thank you John for watching.
Love your videos. Where are you located? I have a 19 tundra.
Great install and video.. I'm interested in doing same to my Tundra. What's ball park figure for same install on my tundra? The JBL system in Tundras is weak.
Has Fernando ever punched a hole in a door speaker
Big fan here. Great work and dedication. I would like to upgrade to the 4100nex, what accessories or extra parts do I need to maintain my steering wheel controls? 2012 sonata 2.0T . would appreciate if provide links. Thank you in advance.
Jose Rubiera go to www.bestkits.com for a full list of parts. Down load the Control Pro app from PAC. That will help with the steering wheel controls. Get the PAC CP2 steering wheel interface.
Great, do you guys mail vehicle equipment if order out of state
That's real nice install , I like the way you guys mount the amp. On abs board ...I noticed you wrap all you're cables whit some cloth tape,,,do. you have a link where to get that?
santiago guerrero yes it is Tess tape
www.amazon.com/dp/B00EH6IZ6Y/ref=cm_sw_r_cp_awdb_G.4Oyb1AZWJQV
Lotta chrome on front
I realize this is 3 yrs old but I have a Tundra (non-jbl).. How did you fit the 6x9's in the door? The mounting depth is over 3". Even with the adapter the back of the speaker would hit the window when down, or at the least smash against the back of the door panel.. No?
Hey guys, great videos. In your opinion, which car manufacturer makes the best designed audio systems (wire routing, ease of understanding what each cable might do, highest cable gauge, etc.)?
Thomas Lage they all suck in their own way. If I had to choose I would say Ford or Dodge
Any info on where to plug the USB TY2? I have a 2012 Avalon and I cannot find where to plug it to retain my factory USB
Both of my vehicles have Dynamat everywhere- roof, doors, floor, behind the license plate...
Need a 23 or 24 Camry non jbl video
they installed a new radio and 5 channels amp, how did they connect the center dash speaker or was this eliminated?