Perfect! You covered all the must know items, and enough of the 'how to' for noobs to get started. I can't wait for the explosion of spinning activity that will happen once people start to receive their Nanos.
Finally picked my EEW back up as I've been dying to spin. Couldn't figure out why my yarn was underspun and not going on the bobbin. Turns out my brake band was far too tight! It is now at a manageable tension. Still getting used to even drafting, but now I have a better spin on my yarn and thus far less frustrated! Thank you for making such an affordable (and tight-space friendly) machine! As well as this great video to help newbies like myself.
Thanks for making such a clear, helpful demonstration of using the Nano, and the basics of spinning. I am hoping to give spinning a try soon(ish) and the Nano seems like the perfect option for me. I'm putting it on my birthday list!
That lazy kate is just one my wife has from one of her treadle wheels. I couldn't find the exact lazy kate, but this one is similar: woolery.com/majacraft-universal-tensioned-lazy-kate.html
I love it too! Just FYI though, you can make a lazy kate from a shoebox and straight knitting needles or narrow dowels. Doubles as a carrying box for your Nano and supplies too!
A great plying trick is to put your lazy kate as far behind you as possible while plying. What this does is help even out the twist in your singles before you ply, which makes your yarn a lot more consistent. This is a trick learned from Alden Amos’s big book on handspinning. Excellent reference and would def be my one “desert island” spinning book!
Got my wheel and love it but now I can't get it to pull the spun yarn through. It keeps twisting it but not putting it on the bobbin. I tried adjusting the tension and it either logs the motor down too slowly or it spins it and no uptake at all. Any ideas?
This is first time spinning for me ... glad I found my nano. I too had trouble with overspinning the yarn... then it bunches up and won’t collect on the bobbin. I found that if I tightening the tension helps but then I’ve found the holes in the triangular wires are too small... they tend to “catch” the fibers thus stopping it from winding. Do you offer larger wire triangles or is there a substitute for them? Thank you for your help.
I don't. The nano isn't very good at spinning thick yarn like you are probably spinning. I would suggest spinning thinner yarn. Some people do sell 3d printed sliding hooks but thinner yarn is usually the better solution, especially for new spinners.
Hi I watched your video numerous time and no matter what I do I still have over twist and of course yarn doesn’t go to a bobbin not to mention that low speed is not working!!! Very frustrating any advice?!
If the flyer is spinning then the yarn either has to have uptake or twist unless it isn't threaded correctly. I can't really guess at what is wrong from your description. There are some longer videos about spinning on the EEW Nano here: www.dreamingrobots.com/eew-nano/
![ผัวเถื่อน - ยูริ โตเกียวมิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/P08ORRVDGl8/mqdefault.jpg)
I just got my Nano 2 . I’m going to play with it again this evening. I’m glad I watched this video.
Perfect! You covered all the must know items, and enough of the 'how to' for noobs to get started. I can't wait for the explosion of spinning activity that will happen once people start to receive their Nanos.
Thanks! Good to know you think the right details were covered.
VERY succinctly done! EXCELLENT video and very well paced!
Instead of scotch tape if you use a little Velcro “dot” on your bobbin it works much better and isn’t as fiddly as using tape. Lasts longer too.
I'm a complete spinning noob and found this video very comprehensive and helpful. Can't wait to get my nano wheel!!!
Finally picked my EEW back up as I've been dying to spin. Couldn't figure out why my yarn was underspun and not going on the bobbin. Turns out my brake band was far too tight! It is now at a manageable tension. Still getting used to even drafting, but now I have a better spin on my yarn and thus far less frustrated!
Thank you for making such an affordable (and tight-space friendly) machine! As well as this great video to help newbies like myself.
I just got mine for Christmas and I am in love! I did a quick spin and I love that I am finally getting an even spin. Thank you
I don’t have this particular brand of e spinner but I still found the video to be very instructive. Thank you!
Great instructional video! I'm eagerly awaiting the August shipment of my EEW, and new to spinning.
This will be so helpful for getting started😄❤
Looking forward to receiving my Nano! Thanks for this video.😊
This looks like the perfect travel spinner. I’m excited to get mine.
I've just ordered my and I'm stupidly excited!
Thanks for making such a clear, helpful demonstration of using the Nano, and the basics of spinning. I am hoping to give spinning a try soon(ish) and the Nano seems like the perfect option for me. I'm putting it on my birthday list!
At his is excellent! Please could you make it clearer how you adjust the tension brake, though.
Once you have it, I think it will be obvious. There is just a slot and you pull the cord. It is pretty easy once you have it in front of you.
Received ours! So cool! Thanks!
I love that lazy kate!
That lazy kate is just one my wife has from one of her treadle wheels. I couldn't find the exact lazy kate, but this one is similar: woolery.com/majacraft-universal-tensioned-lazy-kate.html
I love it too! Just FYI though, you can make a lazy kate from a shoebox and straight knitting needles or narrow dowels. Doubles as a carrying box for your Nano and supplies too!
Kelly Bell brilliant
A great plying trick is to put your lazy kate as far behind you as possible while plying. What this does is help even out the twist in your singles before you ply, which makes your yarn a lot more consistent. This is a trick learned from Alden Amos’s big book on handspinning. Excellent reference and would def be my one “desert island” spinning book!
can't wait till you have more stock of the nano so I can get one
Thanks
Got my wheel and love it but now I can't get it to pull the spun yarn through. It keeps twisting it but not putting it on the bobbin. I tried adjusting the tension and it either logs the motor down too slowly or it spins it and no uptake at all. Any ideas?
There are a bunch of suggestions on www.dreamingrobots.com/eew-nano
If you want to contact me use this page: www.dreamingrobots.com/contact-us/
Snicklefarkles Me too, and I am a very experienced spinner.
I’m having trouble with the yarn collecting on the bobbin, it won’t wind? What am I doing wrong
Make sure you tape the lead yarn so it does not slip
I changed my roving and sat back alittle bit more and I’m doing great!!! Love your invention, thank you so much!!!
¿¿¿ DONDE ESTA EL MOTOR?? NO ENTIENDO INGLIS
This is first time spinning for me ... glad I found my nano. I too had trouble with overspinning the yarn... then it bunches up and won’t collect on the bobbin. I found that if I tightening the tension helps but then I’ve found the holes in the triangular wires are too small... they tend to “catch” the fibers thus stopping it from winding. Do you offer larger wire triangles or is there a substitute for them? Thank you for your help.
I don't. The nano isn't very good at spinning thick yarn like you are probably spinning. I would suggest spinning thinner yarn. Some people do sell 3d printed sliding hooks but thinner yarn is usually the better solution, especially for new spinners.
Hi I watched your video numerous time and no matter what I do I still have over twist and of course yarn doesn’t go to a bobbin not to mention that low speed is not working!!! Very frustrating any advice?!
If the flyer is spinning then the yarn either has to have uptake or twist unless it isn't threaded correctly. I can't really guess at what is wrong from your description. There are some longer videos about spinning on the EEW Nano here: www.dreamingrobots.com/eew-nano/
@@DreamingRobotsBlog thank You sooo much!!! It was my immaturity as a spinner🤪
Hai can I buy this product I am from india
Hai reply me
Is there some way too hook up a variable-speed footswitch (like on a sewing machine) to the Nano?
It's probably possible, but it would be quite hard since the pedal would need to handle the PWM.
Dreaming Robots thanks Maurice!
Hello, where can I buy a device like this? Thank you for your help
You can purchase it here: www.dreamingrobots.com/product/eew-nano/
I want to buy a black Nano electric spinning wheel. where can I buy it, on which website?
You can buy it here: www.dreamingrobots.com/
Where can I buy the Nano?
You can buy it on my store here: www.dreamingrobots.com/product-category/electric-eel-wheel-nano-store/
QUIERO UNA
Sorry, I bought, thank you.
marathi mahati