ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- Peugeot or Citroen show Additive Fluid Level Too Low. Here is how to fix it. It means that PAT Fluid needs to be topped up and then the Engine ECU needs to be RESET. In this video you can see how to carry out the job exactly and what tools you will need for it. Enjoy.
Get in touch: / mrniceguy9494
Buy some COOL BS from here: amzn.to/48GwXYw - Amazon Affiliate Link
Budget Scanner - amzn.to/3Iqfjxs
Cheap Scanner - amzn.to/3TuwMeQ
Thanks for the video, I’ve just done mine, the only thing I will say to anyone who wants to do this, when I pushed the plug in it did click but it leaked quite a bit at first so I wrapped Elc tape round the plug that is attached to the bottle and pushed it in tight it didn’t click but I went in perfectly with no leak.. cheers 🍻
Thanks for the useful information! ;) I will pin your comment so that other will see it too.
Thanks for the video, ill be refilling mine today after it went into limp mode bwcause of this yesterday.
Is it possible for the ECU to rectify the codes to stop limp mode automatically once i have refilled it? I don't have access to a diagnostic tool currently.
Also, a side note on how long the fluid should last - i had a chat with a specialist in the field yesterday who mentioned that adding small amounts of fuel at a time at fuel stations will rapidly increase the speed that this fluid requires replacing as its added to the tank each time it senses fuel being added to the tank so its best to put more fuel in each time rather than £15 here and there. Thought it might be worth sharing that info!
Thanks!
Great video all my problems solved i will be doing this soon as the fluid arrives. Thank you 🎉
Peogeot dealers says it should never need replacing. It's supposed to last the life ov car.and they were wanting 600 pound to get the anti pollution light off saying it needed new pat tank etc
Is it the same as a 207sw
Thanks for the video.
Is this procedure the same as Peugeot 3008 , 2011 model?
Yes
What about peugot 207?
@@monirmualla
Hei
Thanks for video.
How many liters does the 308 fit? and Is it possible to pour, say, only 1 liter and cancel the error? Without filling a full tank.
One liter is enough. You need to let the ECU know that you filled it up and then erase the error.
@@MrNiceGuy94 Thank you so much. 😊👍👍
Thank you for a great instructions. Is there any free android app that can be used for reset the warning and telling the car that top up was done?
Hi, I don't think there is any.
This has happend to my peugeot 308 yeasterday and car has gone into limp mode. I beleve there is 2 variants of pat fluid I'm not sure what one I need. I beleve you get one for fap and dpf can you help me please reg is wv63 fsa
Get the universal one that has all numbers on from 1 to 4 , it cost around 30 euro in Europe
Yes yes save money. But you need a few thousand dollar diagnostic tool to do it. Thank you for the advice.
Iv done thus but has I turn it upside down where the connector is its peaking everywhere 🤔
What diagnostic tool are you using please
Autel MK908
Hello how long can you drive when the warning comes up mate?
I would say not so long as you are low on fluid. Once it is critically low I believe the car will go into limp mode.
@@MrNiceGuy94Thankyou
@@MrNiceGuy94 just refilled thanks for the video also how long does a litre last do you know?
About 100k miles.
Please I don’t k owe how to do it .
I’m a woman .
done thanks for video
which additiv is this please? red or green?
link please.
PAT fluid, I guess it's red.
Can I ask where you are based and if you can do my Peugeot 308
I am based in East London/Essex. What's wrong with your Peugeot?
Is for petrol 308 aswell?
I don't think petrol ones use PAT fluid.
Needs new tyres...just saying